From 9d6dce119949d340ebb42becae018a3c11148690 Mon Sep 17 00:00:00 2001 From: Daniel J Walsh Date: Thu, 1 Aug 2019 03:46:14 -0400 Subject: github.com/containers/storage v1.12.13 Signed-off-by: Daniel J Walsh --- .../klauspost/compress/snappy/.gitignore | 16 + .../github.com/klauspost/compress/snappy/AUTHORS | 15 + .../klauspost/compress/snappy/CONTRIBUTORS | 37 ++ .../github.com/klauspost/compress/snappy/LICENSE | 27 + vendor/github.com/klauspost/compress/snappy/README | 107 +++ .../github.com/klauspost/compress/snappy/decode.go | 237 +++++++ .../klauspost/compress/snappy/decode_amd64.go | 14 + .../klauspost/compress/snappy/decode_amd64.s | 490 ++++++++++++++ .../klauspost/compress/snappy/decode_other.go | 101 +++ .../github.com/klauspost/compress/snappy/encode.go | 285 ++++++++ .../klauspost/compress/snappy/encode_amd64.go | 29 + .../klauspost/compress/snappy/encode_amd64.s | 730 +++++++++++++++++++++ .../klauspost/compress/snappy/encode_other.go | 238 +++++++ .../klauspost/compress/snappy/runbench.cmd | 2 + .../github.com/klauspost/compress/snappy/snappy.go | 98 +++ 15 files changed, 2426 insertions(+) create mode 100644 vendor/github.com/klauspost/compress/snappy/.gitignore create mode 100644 vendor/github.com/klauspost/compress/snappy/AUTHORS create mode 100644 vendor/github.com/klauspost/compress/snappy/CONTRIBUTORS create mode 100644 vendor/github.com/klauspost/compress/snappy/LICENSE create mode 100644 vendor/github.com/klauspost/compress/snappy/README create mode 100644 vendor/github.com/klauspost/compress/snappy/decode.go create mode 100644 vendor/github.com/klauspost/compress/snappy/decode_amd64.go create mode 100644 vendor/github.com/klauspost/compress/snappy/decode_amd64.s create mode 100644 vendor/github.com/klauspost/compress/snappy/decode_other.go create mode 100644 vendor/github.com/klauspost/compress/snappy/encode.go create mode 100644 vendor/github.com/klauspost/compress/snappy/encode_amd64.go create mode 100644 vendor/github.com/klauspost/compress/snappy/encode_amd64.s create mode 100644 vendor/github.com/klauspost/compress/snappy/encode_other.go create mode 100644 vendor/github.com/klauspost/compress/snappy/runbench.cmd create mode 100644 vendor/github.com/klauspost/compress/snappy/snappy.go (limited to 'vendor/github.com/klauspost/compress/snappy') diff --git a/vendor/github.com/klauspost/compress/snappy/.gitignore b/vendor/github.com/klauspost/compress/snappy/.gitignore new file mode 100644 index 000000000..042091d9b --- /dev/null +++ b/vendor/github.com/klauspost/compress/snappy/.gitignore @@ -0,0 +1,16 @@ +cmd/snappytool/snappytool +testdata/bench + +# These explicitly listed benchmark data files are for an obsolete version of +# snappy_test.go. +testdata/alice29.txt +testdata/asyoulik.txt +testdata/fireworks.jpeg +testdata/geo.protodata +testdata/html +testdata/html_x_4 +testdata/kppkn.gtb +testdata/lcet10.txt +testdata/paper-100k.pdf +testdata/plrabn12.txt +testdata/urls.10K diff --git a/vendor/github.com/klauspost/compress/snappy/AUTHORS b/vendor/github.com/klauspost/compress/snappy/AUTHORS new file mode 100644 index 000000000..bcfa19520 --- /dev/null +++ b/vendor/github.com/klauspost/compress/snappy/AUTHORS @@ -0,0 +1,15 @@ +# This is the official list of Snappy-Go authors for copyright purposes. +# This file is distinct from the CONTRIBUTORS files. +# See the latter for an explanation. + +# Names should be added to this file as +# Name or Organization +# The email address is not required for organizations. + +# Please keep the list sorted. + +Damian Gryski +Google Inc. +Jan Mercl <0xjnml@gmail.com> +Rodolfo Carvalho +Sebastien Binet diff --git a/vendor/github.com/klauspost/compress/snappy/CONTRIBUTORS b/vendor/github.com/klauspost/compress/snappy/CONTRIBUTORS new file mode 100644 index 000000000..931ae3160 --- /dev/null +++ b/vendor/github.com/klauspost/compress/snappy/CONTRIBUTORS @@ -0,0 +1,37 @@ +# This is the official list of people who can contribute +# (and typically have contributed) code to the Snappy-Go repository. +# The AUTHORS file lists the copyright holders; this file +# lists people. For example, Google employees are listed here +# but not in AUTHORS, because Google holds the copyright. +# +# The submission process automatically checks to make sure +# that people submitting code are listed in this file (by email address). +# +# Names should be added to this file only after verifying that +# the individual or the individual's organization has agreed to +# the appropriate Contributor License Agreement, found here: +# +# http://code.google.com/legal/individual-cla-v1.0.html +# http://code.google.com/legal/corporate-cla-v1.0.html +# +# The agreement for individuals can be filled out on the web. +# +# When adding J Random Contributor's name to this file, +# either J's name or J's organization's name should be +# added to the AUTHORS file, depending on whether the +# individual or corporate CLA was used. + +# Names should be added to this file like so: +# Name + +# Please keep the list sorted. + +Damian Gryski +Jan Mercl <0xjnml@gmail.com> +Kai Backman +Marc-Antoine Ruel +Nigel Tao +Rob Pike +Rodolfo Carvalho +Russ Cox +Sebastien Binet diff --git a/vendor/github.com/klauspost/compress/snappy/LICENSE b/vendor/github.com/klauspost/compress/snappy/LICENSE new file mode 100644 index 000000000..6050c10f4 --- /dev/null +++ b/vendor/github.com/klauspost/compress/snappy/LICENSE @@ -0,0 +1,27 @@ +Copyright (c) 2011 The Snappy-Go Authors. All rights reserved. + +Redistribution and use in source and binary forms, with or without +modification, are permitted provided that the following conditions are +met: + + * Redistributions of source code must retain the above copyright +notice, this list of conditions and the following disclaimer. + * Redistributions in binary form must reproduce the above +copyright notice, this list of conditions and the following disclaimer +in the documentation and/or other materials provided with the +distribution. + * Neither the name of Google Inc. nor the names of its +contributors may be used to endorse or promote products derived from +this software without specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. diff --git a/vendor/github.com/klauspost/compress/snappy/README b/vendor/github.com/klauspost/compress/snappy/README new file mode 100644 index 000000000..cea12879a --- /dev/null +++ b/vendor/github.com/klauspost/compress/snappy/README @@ -0,0 +1,107 @@ +The Snappy compression format in the Go programming language. + +To download and install from source: +$ go get github.com/golang/snappy + +Unless otherwise noted, the Snappy-Go source files are distributed +under the BSD-style license found in the LICENSE file. + + + +Benchmarks. + +The golang/snappy benchmarks include compressing (Z) and decompressing (U) ten +or so files, the same set used by the C++ Snappy code (github.com/google/snappy +and note the "google", not "golang"). On an "Intel(R) Core(TM) i7-3770 CPU @ +3.40GHz", Go's GOARCH=amd64 numbers as of 2016-05-29: + +"go test -test.bench=." + +_UFlat0-8 2.19GB/s ± 0% html +_UFlat1-8 1.41GB/s ± 0% urls +_UFlat2-8 23.5GB/s ± 2% jpg +_UFlat3-8 1.91GB/s ± 0% jpg_200 +_UFlat4-8 14.0GB/s ± 1% pdf +_UFlat5-8 1.97GB/s ± 0% html4 +_UFlat6-8 814MB/s ± 0% txt1 +_UFlat7-8 785MB/s ± 0% txt2 +_UFlat8-8 857MB/s ± 0% txt3 +_UFlat9-8 719MB/s ± 1% txt4 +_UFlat10-8 2.84GB/s ± 0% pb +_UFlat11-8 1.05GB/s ± 0% gaviota + +_ZFlat0-8 1.04GB/s ± 0% html +_ZFlat1-8 534MB/s ± 0% urls +_ZFlat2-8 15.7GB/s ± 1% jpg +_ZFlat3-8 740MB/s ± 3% jpg_200 +_ZFlat4-8 9.20GB/s ± 1% pdf +_ZFlat5-8 991MB/s ± 0% html4 +_ZFlat6-8 379MB/s ± 0% txt1 +_ZFlat7-8 352MB/s ± 0% txt2 +_ZFlat8-8 396MB/s ± 1% txt3 +_ZFlat9-8 327MB/s ± 1% txt4 +_ZFlat10-8 1.33GB/s ± 1% pb +_ZFlat11-8 605MB/s ± 1% gaviota + + + +"go test -test.bench=. -tags=noasm" + +_UFlat0-8 621MB/s ± 2% html +_UFlat1-8 494MB/s ± 1% urls +_UFlat2-8 23.2GB/s ± 1% jpg +_UFlat3-8 1.12GB/s ± 1% jpg_200 +_UFlat4-8 4.35GB/s ± 1% pdf +_UFlat5-8 609MB/s ± 0% html4 +_UFlat6-8 296MB/s ± 0% txt1 +_UFlat7-8 288MB/s ± 0% txt2 +_UFlat8-8 309MB/s ± 1% txt3 +_UFlat9-8 280MB/s ± 1% txt4 +_UFlat10-8 753MB/s ± 0% pb +_UFlat11-8 400MB/s ± 0% gaviota + +_ZFlat0-8 409MB/s ± 1% html +_ZFlat1-8 250MB/s ± 1% urls +_ZFlat2-8 12.3GB/s ± 1% jpg +_ZFlat3-8 132MB/s ± 0% jpg_200 +_ZFlat4-8 2.92GB/s ± 0% pdf +_ZFlat5-8 405MB/s ± 1% html4 +_ZFlat6-8 179MB/s ± 1% txt1 +_ZFlat7-8 170MB/s ± 1% txt2 +_ZFlat8-8 189MB/s ± 1% txt3 +_ZFlat9-8 164MB/s ± 1% txt4 +_ZFlat10-8 479MB/s ± 1% pb +_ZFlat11-8 270MB/s ± 1% gaviota + + + +For comparison (Go's encoded output is byte-for-byte identical to C++'s), here +are the numbers from C++ Snappy's + +make CXXFLAGS="-O2 -DNDEBUG -g" clean snappy_unittest.log && cat snappy_unittest.log + +BM_UFlat/0 2.4GB/s html +BM_UFlat/1 1.4GB/s urls +BM_UFlat/2 21.8GB/s jpg +BM_UFlat/3 1.5GB/s jpg_200 +BM_UFlat/4 13.3GB/s pdf +BM_UFlat/5 2.1GB/s html4 +BM_UFlat/6 1.0GB/s txt1 +BM_UFlat/7 959.4MB/s txt2 +BM_UFlat/8 1.0GB/s txt3 +BM_UFlat/9 864.5MB/s txt4 +BM_UFlat/10 2.9GB/s pb +BM_UFlat/11 1.2GB/s gaviota + +BM_ZFlat/0 944.3MB/s html (22.31 %) +BM_ZFlat/1 501.6MB/s urls (47.78 %) +BM_ZFlat/2 14.3GB/s jpg (99.95 %) +BM_ZFlat/3 538.3MB/s jpg_200 (73.00 %) +BM_ZFlat/4 8.3GB/s pdf (83.30 %) +BM_ZFlat/5 903.5MB/s html4 (22.52 %) +BM_ZFlat/6 336.0MB/s txt1 (57.88 %) +BM_ZFlat/7 312.3MB/s txt2 (61.91 %) +BM_ZFlat/8 353.1MB/s txt3 (54.99 %) +BM_ZFlat/9 289.9MB/s txt4 (66.26 %) +BM_ZFlat/10 1.2GB/s pb (19.68 %) +BM_ZFlat/11 527.4MB/s gaviota (37.72 %) diff --git a/vendor/github.com/klauspost/compress/snappy/decode.go b/vendor/github.com/klauspost/compress/snappy/decode.go new file mode 100644 index 000000000..72efb0353 --- /dev/null +++ b/vendor/github.com/klauspost/compress/snappy/decode.go @@ -0,0 +1,237 @@ +// Copyright 2011 The Snappy-Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +package snappy + +import ( + "encoding/binary" + "errors" + "io" +) + +var ( + // ErrCorrupt reports that the input is invalid. + ErrCorrupt = errors.New("snappy: corrupt input") + // ErrTooLarge reports that the uncompressed length is too large. + ErrTooLarge = errors.New("snappy: decoded block is too large") + // ErrUnsupported reports that the input isn't supported. + ErrUnsupported = errors.New("snappy: unsupported input") + + errUnsupportedLiteralLength = errors.New("snappy: unsupported literal length") +) + +// DecodedLen returns the length of the decoded block. +func DecodedLen(src []byte) (int, error) { + v, _, err := decodedLen(src) + return v, err +} + +// decodedLen returns the length of the decoded block and the number of bytes +// that the length header occupied. +func decodedLen(src []byte) (blockLen, headerLen int, err error) { + v, n := binary.Uvarint(src) + if n <= 0 || v > 0xffffffff { + return 0, 0, ErrCorrupt + } + + const wordSize = 32 << (^uint(0) >> 32 & 1) + if wordSize == 32 && v > 0x7fffffff { + return 0, 0, ErrTooLarge + } + return int(v), n, nil +} + +const ( + decodeErrCodeCorrupt = 1 + decodeErrCodeUnsupportedLiteralLength = 2 +) + +// Decode returns the decoded form of src. The returned slice may be a sub- +// slice of dst if dst was large enough to hold the entire decoded block. +// Otherwise, a newly allocated slice will be returned. +// +// The dst and src must not overlap. It is valid to pass a nil dst. +func Decode(dst, src []byte) ([]byte, error) { + dLen, s, err := decodedLen(src) + if err != nil { + return nil, err + } + if dLen <= len(dst) { + dst = dst[:dLen] + } else { + dst = make([]byte, dLen) + } + switch decode(dst, src[s:]) { + case 0: + return dst, nil + case decodeErrCodeUnsupportedLiteralLength: + return nil, errUnsupportedLiteralLength + } + return nil, ErrCorrupt +} + +// NewReader returns a new Reader that decompresses from r, using the framing +// format described at +// https://github.com/google/snappy/blob/master/framing_format.txt +func NewReader(r io.Reader) *Reader { + return &Reader{ + r: r, + decoded: make([]byte, maxBlockSize), + buf: make([]byte, maxEncodedLenOfMaxBlockSize+checksumSize), + } +} + +// Reader is an io.Reader that can read Snappy-compressed bytes. +type Reader struct { + r io.Reader + err error + decoded []byte + buf []byte + // decoded[i:j] contains decoded bytes that have not yet been passed on. + i, j int + readHeader bool +} + +// Reset discards any buffered data, resets all state, and switches the Snappy +// reader to read from r. This permits reusing a Reader rather than allocating +// a new one. +func (r *Reader) Reset(reader io.Reader) { + r.r = reader + r.err = nil + r.i = 0 + r.j = 0 + r.readHeader = false +} + +func (r *Reader) readFull(p []byte, allowEOF bool) (ok bool) { + if _, r.err = io.ReadFull(r.r, p); r.err != nil { + if r.err == io.ErrUnexpectedEOF || (r.err == io.EOF && !allowEOF) { + r.err = ErrCorrupt + } + return false + } + return true +} + +// Read satisfies the io.Reader interface. +func (r *Reader) Read(p []byte) (int, error) { + if r.err != nil { + return 0, r.err + } + for { + if r.i < r.j { + n := copy(p, r.decoded[r.i:r.j]) + r.i += n + return n, nil + } + if !r.readFull(r.buf[:4], true) { + return 0, r.err + } + chunkType := r.buf[0] + if !r.readHeader { + if chunkType != chunkTypeStreamIdentifier { + r.err = ErrCorrupt + return 0, r.err + } + r.readHeader = true + } + chunkLen := int(r.buf[1]) | int(r.buf[2])<<8 | int(r.buf[3])<<16 + if chunkLen > len(r.buf) { + r.err = ErrUnsupported + return 0, r.err + } + + // The chunk types are specified at + // https://github.com/google/snappy/blob/master/framing_format.txt + switch chunkType { + case chunkTypeCompressedData: + // Section 4.2. Compressed data (chunk type 0x00). + if chunkLen < checksumSize { + r.err = ErrCorrupt + return 0, r.err + } + buf := r.buf[:chunkLen] + if !r.readFull(buf, false) { + return 0, r.err + } + checksum := uint32(buf[0]) | uint32(buf[1])<<8 | uint32(buf[2])<<16 | uint32(buf[3])<<24 + buf = buf[checksumSize:] + + n, err := DecodedLen(buf) + if err != nil { + r.err = err + return 0, r.err + } + if n > len(r.decoded) { + r.err = ErrCorrupt + return 0, r.err + } + if _, err := Decode(r.decoded, buf); err != nil { + r.err = err + return 0, r.err + } + if crc(r.decoded[:n]) != checksum { + r.err = ErrCorrupt + return 0, r.err + } + r.i, r.j = 0, n + continue + + case chunkTypeUncompressedData: + // Section 4.3. Uncompressed data (chunk type 0x01). + if chunkLen < checksumSize { + r.err = ErrCorrupt + return 0, r.err + } + buf := r.buf[:checksumSize] + if !r.readFull(buf, false) { + return 0, r.err + } + checksum := uint32(buf[0]) | uint32(buf[1])<<8 | uint32(buf[2])<<16 | uint32(buf[3])<<24 + // Read directly into r.decoded instead of via r.buf. + n := chunkLen - checksumSize + if n > len(r.decoded) { + r.err = ErrCorrupt + return 0, r.err + } + if !r.readFull(r.decoded[:n], false) { + return 0, r.err + } + if crc(r.decoded[:n]) != checksum { + r.err = ErrCorrupt + return 0, r.err + } + r.i, r.j = 0, n + continue + + case chunkTypeStreamIdentifier: + // Section 4.1. Stream identifier (chunk type 0xff). + if chunkLen != len(magicBody) { + r.err = ErrCorrupt + return 0, r.err + } + if !r.readFull(r.buf[:len(magicBody)], false) { + return 0, r.err + } + for i := 0; i < len(magicBody); i++ { + if r.buf[i] != magicBody[i] { + r.err = ErrCorrupt + return 0, r.err + } + } + continue + } + + if chunkType <= 0x7f { + // Section 4.5. Reserved unskippable chunks (chunk types 0x02-0x7f). + r.err = ErrUnsupported + return 0, r.err + } + // Section 4.4 Padding (chunk type 0xfe). + // Section 4.6. Reserved skippable chunks (chunk types 0x80-0xfd). + if !r.readFull(r.buf[:chunkLen], false) { + return 0, r.err + } + } +} diff --git a/vendor/github.com/klauspost/compress/snappy/decode_amd64.go b/vendor/github.com/klauspost/compress/snappy/decode_amd64.go new file mode 100644 index 000000000..fcd192b84 --- /dev/null +++ b/vendor/github.com/klauspost/compress/snappy/decode_amd64.go @@ -0,0 +1,14 @@ +// Copyright 2016 The Snappy-Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// +build !appengine +// +build gc +// +build !noasm + +package snappy + +// decode has the same semantics as in decode_other.go. +// +//go:noescape +func decode(dst, src []byte) int diff --git a/vendor/github.com/klauspost/compress/snappy/decode_amd64.s b/vendor/github.com/klauspost/compress/snappy/decode_amd64.s new file mode 100644 index 000000000..e6179f65e --- /dev/null +++ b/vendor/github.com/klauspost/compress/snappy/decode_amd64.s @@ -0,0 +1,490 @@ +// Copyright 2016 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// +build !appengine +// +build gc +// +build !noasm + +#include "textflag.h" + +// The asm code generally follows the pure Go code in decode_other.go, except +// where marked with a "!!!". + +// func decode(dst, src []byte) int +// +// All local variables fit into registers. The non-zero stack size is only to +// spill registers and push args when issuing a CALL. The register allocation: +// - AX scratch +// - BX scratch +// - CX length or x +// - DX offset +// - SI &src[s] +// - DI &dst[d] +// + R8 dst_base +// + R9 dst_len +// + R10 dst_base + dst_len +// + R11 src_base +// + R12 src_len +// + R13 src_base + src_len +// - R14 used by doCopy +// - R15 used by doCopy +// +// The registers R8-R13 (marked with a "+") are set at the start of the +// function, and after a CALL returns, and are not otherwise modified. +// +// The d variable is implicitly DI - R8, and len(dst)-d is R10 - DI. +// The s variable is implicitly SI - R11, and len(src)-s is R13 - SI. +TEXT ·decode(SB), NOSPLIT, $48-56 + // Initialize SI, DI and R8-R13. + MOVQ dst_base+0(FP), R8 + MOVQ dst_len+8(FP), R9 + MOVQ R8, DI + MOVQ R8, R10 + ADDQ R9, R10 + MOVQ src_base+24(FP), R11 + MOVQ src_len+32(FP), R12 + MOVQ R11, SI + MOVQ R11, R13 + ADDQ R12, R13 + +loop: + // for s < len(src) + CMPQ SI, R13 + JEQ end + + // CX = uint32(src[s]) + // + // switch src[s] & 0x03 + MOVBLZX (SI), CX + MOVL CX, BX + ANDL $3, BX + CMPL BX, $1 + JAE tagCopy + + // ---------------------------------------- + // The code below handles literal tags. + + // case tagLiteral: + // x := uint32(src[s] >> 2) + // switch + SHRL $2, CX + CMPL CX, $60 + JAE tagLit60Plus + + // case x < 60: + // s++ + INCQ SI + +doLit: + // This is the end of the inner "switch", when we have a literal tag. + // + // We assume that CX == x and x fits in a uint32, where x is the variable + // used in the pure Go decode_other.go code. + + // length = int(x) + 1 + // + // Unlike the pure Go code, we don't need to check if length <= 0 because + // CX can hold 64 bits, so the increment cannot overflow. + INCQ CX + + // Prepare to check if copying length bytes will run past the end of dst or + // src. + // + // AX = len(dst) - d + // BX = len(src) - s + MOVQ R10, AX + SUBQ DI, AX + MOVQ R13, BX + SUBQ SI, BX + + // !!! Try a faster technique for short (16 or fewer bytes) copies. + // + // if length > 16 || len(dst)-d < 16 || len(src)-s < 16 { + // goto callMemmove // Fall back on calling runtime·memmove. + // } + // + // The C++ snappy code calls this TryFastAppend. It also checks len(src)-s + // against 21 instead of 16, because it cannot assume that all of its input + // is contiguous in memory and so it needs to leave enough source bytes to + // read the next tag without refilling buffers, but Go's Decode assumes + // contiguousness (the src argument is a []byte). + CMPQ CX, $16 + JGT callMemmove + CMPQ AX, $16 + JLT callMemmove + CMPQ BX, $16 + JLT callMemmove + + // !!! Implement the copy from src to dst as a 16-byte load and store. + // (Decode's documentation says that dst and src must not overlap.) + // + // This always copies 16 bytes, instead of only length bytes, but that's + // OK. If the input is a valid Snappy encoding then subsequent iterations + // will fix up the overrun. Otherwise, Decode returns a nil []byte (and a + // non-nil error), so the overrun will be ignored. + // + // Note that on amd64, it is legal and cheap to issue unaligned 8-byte or + // 16-byte loads and stores. This technique probably wouldn't be as + // effective on architectures that are fussier about alignment. + MOVOU 0(SI), X0 + MOVOU X0, 0(DI) + + // d += length + // s += length + ADDQ CX, DI + ADDQ CX, SI + JMP loop + +callMemmove: + // if length > len(dst)-d || length > len(src)-s { etc } + CMPQ CX, AX + JGT errCorrupt + CMPQ CX, BX + JGT errCorrupt + + // copy(dst[d:], src[s:s+length]) + // + // This means calling runtime·memmove(&dst[d], &src[s], length), so we push + // DI, SI and CX as arguments. Coincidentally, we also need to spill those + // three registers to the stack, to save local variables across the CALL. + MOVQ DI, 0(SP) + MOVQ SI, 8(SP) + MOVQ CX, 16(SP) + MOVQ DI, 24(SP) + MOVQ SI, 32(SP) + MOVQ CX, 40(SP) + CALL runtime·memmove(SB) + + // Restore local variables: unspill registers from the stack and + // re-calculate R8-R13. + MOVQ 24(SP), DI + MOVQ 32(SP), SI + MOVQ 40(SP), CX + MOVQ dst_base+0(FP), R8 + MOVQ dst_len+8(FP), R9 + MOVQ R8, R10 + ADDQ R9, R10 + MOVQ src_base+24(FP), R11 + MOVQ src_len+32(FP), R12 + MOVQ R11, R13 + ADDQ R12, R13 + + // d += length + // s += length + ADDQ CX, DI + ADDQ CX, SI + JMP loop + +tagLit60Plus: + // !!! This fragment does the + // + // s += x - 58; if uint(s) > uint(len(src)) { etc } + // + // checks. In the asm version, we code it once instead of once per switch case. + ADDQ CX, SI + SUBQ $58, SI + MOVQ SI, BX + SUBQ R11, BX + CMPQ BX, R12 + JA errCorrupt + + // case x == 60: + CMPL CX, $61 + JEQ tagLit61 + JA tagLit62Plus + + // x = uint32(src[s-1]) + MOVBLZX -1(SI), CX + JMP doLit + +tagLit61: + // case x == 61: + // x = uint32(src[s-2]) | uint32(src[s-1])<<8 + MOVWLZX -2(SI), CX + JMP doLit + +tagLit62Plus: + CMPL CX, $62 + JA tagLit63 + + // case x == 62: + // x = uint32(src[s-3]) | uint32(src[s-2])<<8 | uint32(src[s-1])<<16 + MOVWLZX -3(SI), CX + MOVBLZX -1(SI), BX + SHLL $16, BX + ORL BX, CX + JMP doLit + +tagLit63: + // case x == 63: + // x = uint32(src[s-4]) | uint32(src[s-3])<<8 | uint32(src[s-2])<<16 | uint32(src[s-1])<<24 + MOVL -4(SI), CX + JMP doLit + +// The code above handles literal tags. +// ---------------------------------------- +// The code below handles copy tags. + +tagCopy4: + // case tagCopy4: + // s += 5 + ADDQ $5, SI + + // if uint(s) > uint(len(src)) { etc } + MOVQ SI, BX + SUBQ R11, BX + CMPQ BX, R12 + JA errCorrupt + + // length = 1 + int(src[s-5])>>2 + SHRQ $2, CX + INCQ CX + + // offset = int(uint32(src[s-4]) | uint32(src[s-3])<<8 | uint32(src[s-2])<<16 | uint32(src[s-1])<<24) + MOVLQZX -4(SI), DX + JMP doCopy + +tagCopy2: + // case tagCopy2: + // s += 3 + ADDQ $3, SI + + // if uint(s) > uint(len(src)) { etc } + MOVQ SI, BX + SUBQ R11, BX + CMPQ BX, R12 + JA errCorrupt + + // length = 1 + int(src[s-3])>>2 + SHRQ $2, CX + INCQ CX + + // offset = int(uint32(src[s-2]) | uint32(src[s-1])<<8) + MOVWQZX -2(SI), DX + JMP doCopy + +tagCopy: + // We have a copy tag. We assume that: + // - BX == src[s] & 0x03 + // - CX == src[s] + CMPQ BX, $2 + JEQ tagCopy2 + JA tagCopy4 + + // case tagCopy1: + // s += 2 + ADDQ $2, SI + + // if uint(s) > uint(len(src)) { etc } + MOVQ SI, BX + SUBQ R11, BX + CMPQ BX, R12 + JA errCorrupt + + // offset = int(uint32(src[s-2])&0xe0<<3 | uint32(src[s-1])) + MOVQ CX, DX + ANDQ $0xe0, DX + SHLQ $3, DX + MOVBQZX -1(SI), BX + ORQ BX, DX + + // length = 4 + int(src[s-2])>>2&0x7 + SHRQ $2, CX + ANDQ $7, CX + ADDQ $4, CX + +doCopy: + // This is the end of the outer "switch", when we have a copy tag. + // + // We assume that: + // - CX == length && CX > 0 + // - DX == offset + + // if offset <= 0 { etc } + CMPQ DX, $0 + JLE errCorrupt + + // if d < offset { etc } + MOVQ DI, BX + SUBQ R8, BX + CMPQ BX, DX + JLT errCorrupt + + // if length > len(dst)-d { etc } + MOVQ R10, BX + SUBQ DI, BX + CMPQ CX, BX + JGT errCorrupt + + // forwardCopy(dst[d:d+length], dst[d-offset:]); d += length + // + // Set: + // - R14 = len(dst)-d + // - R15 = &dst[d-offset] + MOVQ R10, R14 + SUBQ DI, R14 + MOVQ DI, R15 + SUBQ DX, R15 + + // !!! Try a faster technique for short (16 or fewer bytes) forward copies. + // + // First, try using two 8-byte load/stores, similar to the doLit technique + // above. Even if dst[d:d+length] and dst[d-offset:] can overlap, this is + // still OK if offset >= 8. Note that this has to be two 8-byte load/stores + // and not one 16-byte load/store, and the first store has to be before the + // second load, due to the overlap if offset is in the range [8, 16). + // + // if length > 16 || offset < 8 || len(dst)-d < 16 { + // goto slowForwardCopy + // } + // copy 16 bytes + // d += length + CMPQ CX, $16 + JGT slowForwardCopy + CMPQ DX, $8 + JLT slowForwardCopy + CMPQ R14, $16 + JLT slowForwardCopy + MOVQ 0(R15), AX + MOVQ AX, 0(DI) + MOVQ 8(R15), BX + MOVQ BX, 8(DI) + ADDQ CX, DI + JMP loop + +slowForwardCopy: + // !!! If the forward copy is longer than 16 bytes, or if offset < 8, we + // can still try 8-byte load stores, provided we can overrun up to 10 extra + // bytes. As above, the overrun will be fixed up by subsequent iterations + // of the outermost loop. + // + // The C++ snappy code calls this technique IncrementalCopyFastPath. Its + // commentary says: + // + // ---- + // + // The main part of this loop is a simple copy of eight bytes at a time + // until we've copied (at least) the requested amount of bytes. However, + // if d and d-offset are less than eight bytes apart (indicating a + // repeating pattern of length < 8), we first need to expand the pattern in + // order to get the correct results. For instance, if the buffer looks like + // this, with the eight-byte and patterns marked as + // intervals: + // + // abxxxxxxxxxxxx + // [------] d-offset + // [------] d + // + // a single eight-byte copy from to will repeat the pattern + // once, after which we can move two bytes without moving : + // + // ababxxxxxxxxxx + // [------] d-offset + // [------] d + // + // and repeat the exercise until the two no longer overlap. + // + // This allows us to do very well in the special case of one single byte + // repeated many times, without taking a big hit for more general cases. + // + // The worst case of extra writing past the end of the match occurs when + // offset == 1 and length == 1; the last copy will read from byte positions + // [0..7] and write to [4..11], whereas it was only supposed to write to + // position 1. Thus, ten excess bytes. + // + // ---- + // + // That "10 byte overrun" worst case is confirmed by Go's + // TestSlowForwardCopyOverrun, which also tests the fixUpSlowForwardCopy + // and finishSlowForwardCopy algorithm. + // + // if length > len(dst)-d-10 { + // goto verySlowForwardCopy + // } + SUBQ $10, R14 + CMPQ CX, R14 + JGT verySlowForwardCopy + +makeOffsetAtLeast8: + // !!! As above, expand the pattern so that offset >= 8 and we can use + // 8-byte load/stores. + // + // for offset < 8 { + // copy 8 bytes from dst[d-offset:] to dst[d:] + // length -= offset + // d += offset + // offset += offset + // // The two previous lines together means that d-offset, and therefore + // // R15, is unchanged. + // } + CMPQ DX, $8 + JGE fixUpSlowForwardCopy + MOVQ (R15), BX + MOVQ BX, (DI) + SUBQ DX, CX + ADDQ DX, DI + ADDQ DX, DX + JMP makeOffsetAtLeast8 + +fixUpSlowForwardCopy: + // !!! Add length (which might be negative now) to d (implied by DI being + // &dst[d]) so that d ends up at the right place when we jump back to the + // top of the loop. Before we do that, though, we save DI to AX so that, if + // length is positive, copying the remaining length bytes will write to the + // right place. + MOVQ DI, AX + ADDQ CX, DI + +finishSlowForwardCopy: + // !!! Repeat 8-byte load/stores until length <= 0. Ending with a negative + // length means that we overrun, but as above, that will be fixed up by + // subsequent iterations of the outermost loop. + CMPQ CX, $0 + JLE loop + MOVQ (R15), BX + MOVQ BX, (AX) + ADDQ $8, R15 + ADDQ $8, AX + SUBQ $8, CX + JMP finishSlowForwardCopy + +verySlowForwardCopy: + // verySlowForwardCopy is a simple implementation of forward copy. In C + // parlance, this is a do/while loop instead of a while loop, since we know + // that length > 0. In Go syntax: + // + // for { + // dst[d] = dst[d - offset] + // d++ + // length-- + // if length == 0 { + // break + // } + // } + MOVB (R15), BX + MOVB BX, (DI) + INCQ R15 + INCQ DI + DECQ CX + JNZ verySlowForwardCopy + JMP loop + +// The code above handles copy tags. +// ---------------------------------------- + +end: + // This is the end of the "for s < len(src)". + // + // if d != len(dst) { etc } + CMPQ DI, R10 + JNE errCorrupt + + // return 0 + MOVQ $0, ret+48(FP) + RET + +errCorrupt: + // return decodeErrCodeCorrupt + MOVQ $1, ret+48(FP) + RET diff --git a/vendor/github.com/klauspost/compress/snappy/decode_other.go b/vendor/github.com/klauspost/compress/snappy/decode_other.go new file mode 100644 index 000000000..8c9f2049b --- /dev/null +++ b/vendor/github.com/klauspost/compress/snappy/decode_other.go @@ -0,0 +1,101 @@ +// Copyright 2016 The Snappy-Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// +build !amd64 appengine !gc noasm + +package snappy + +// decode writes the decoding of src to dst. It assumes that the varint-encoded +// length of the decompressed bytes has already been read, and that len(dst) +// equals that length. +// +// It returns 0 on success or a decodeErrCodeXxx error code on failure. +func decode(dst, src []byte) int { + var d, s, offset, length int + for s < len(src) { + switch src[s] & 0x03 { + case tagLiteral: + x := uint32(src[s] >> 2) + switch { + case x < 60: + s++ + case x == 60: + s += 2 + if uint(s) > uint(len(src)) { // The uint conversions catch overflow from the previous line. + return decodeErrCodeCorrupt + } + x = uint32(src[s-1]) + case x == 61: + s += 3 + if uint(s) > uint(len(src)) { // The uint conversions catch overflow from the previous line. + return decodeErrCodeCorrupt + } + x = uint32(src[s-2]) | uint32(src[s-1])<<8 + case x == 62: + s += 4 + if uint(s) > uint(len(src)) { // The uint conversions catch overflow from the previous line. + return decodeErrCodeCorrupt + } + x = uint32(src[s-3]) | uint32(src[s-2])<<8 | uint32(src[s-1])<<16 + case x == 63: + s += 5 + if uint(s) > uint(len(src)) { // The uint conversions catch overflow from the previous line. + return decodeErrCodeCorrupt + } + x = uint32(src[s-4]) | uint32(src[s-3])<<8 | uint32(src[s-2])<<16 | uint32(src[s-1])<<24 + } + length = int(x) + 1 + if length <= 0 { + return decodeErrCodeUnsupportedLiteralLength + } + if length > len(dst)-d || length > len(src)-s { + return decodeErrCodeCorrupt + } + copy(dst[d:], src[s:s+length]) + d += length + s += length + continue + + case tagCopy1: + s += 2 + if uint(s) > uint(len(src)) { // The uint conversions catch overflow from the previous line. + return decodeErrCodeCorrupt + } + length = 4 + int(src[s-2])>>2&0x7 + offset = int(uint32(src[s-2])&0xe0<<3 | uint32(src[s-1])) + + case tagCopy2: + s += 3 + if uint(s) > uint(len(src)) { // The uint conversions catch overflow from the previous line. + return decodeErrCodeCorrupt + } + length = 1 + int(src[s-3])>>2 + offset = int(uint32(src[s-2]) | uint32(src[s-1])<<8) + + case tagCopy4: + s += 5 + if uint(s) > uint(len(src)) { // The uint conversions catch overflow from the previous line. + return decodeErrCodeCorrupt + } + length = 1 + int(src[s-5])>>2 + offset = int(uint32(src[s-4]) | uint32(src[s-3])<<8 | uint32(src[s-2])<<16 | uint32(src[s-1])<<24) + } + + if offset <= 0 || d < offset || length > len(dst)-d { + return decodeErrCodeCorrupt + } + // Copy from an earlier sub-slice of dst to a later sub-slice. Unlike + // the built-in copy function, this byte-by-byte copy always runs + // forwards, even if the slices overlap. Conceptually, this is: + // + // d += forwardCopy(dst[d:d+length], dst[d-offset:]) + for end := d + length; d != end; d++ { + dst[d] = dst[d-offset] + } + } + if d != len(dst) { + return decodeErrCodeCorrupt + } + return 0 +} diff --git a/vendor/github.com/klauspost/compress/snappy/encode.go b/vendor/github.com/klauspost/compress/snappy/encode.go new file mode 100644 index 000000000..8d393e904 --- /dev/null +++ b/vendor/github.com/klauspost/compress/snappy/encode.go @@ -0,0 +1,285 @@ +// Copyright 2011 The Snappy-Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +package snappy + +import ( + "encoding/binary" + "errors" + "io" +) + +// Encode returns the encoded form of src. The returned slice may be a sub- +// slice of dst if dst was large enough to hold the entire encoded block. +// Otherwise, a newly allocated slice will be returned. +// +// The dst and src must not overlap. It is valid to pass a nil dst. +func Encode(dst, src []byte) []byte { + if n := MaxEncodedLen(len(src)); n < 0 { + panic(ErrTooLarge) + } else if len(dst) < n { + dst = make([]byte, n) + } + + // The block starts with the varint-encoded length of the decompressed bytes. + d := binary.PutUvarint(dst, uint64(len(src))) + + for len(src) > 0 { + p := src + src = nil + if len(p) > maxBlockSize { + p, src = p[:maxBlockSize], p[maxBlockSize:] + } + if len(p) < minNonLiteralBlockSize { + d += emitLiteral(dst[d:], p) + } else { + d += encodeBlock(dst[d:], p) + } + } + return dst[:d] +} + +// inputMargin is the minimum number of extra input bytes to keep, inside +// encodeBlock's inner loop. On some architectures, this margin lets us +// implement a fast path for emitLiteral, where the copy of short (<= 16 byte) +// literals can be implemented as a single load to and store from a 16-byte +// register. That literal's actual length can be as short as 1 byte, so this +// can copy up to 15 bytes too much, but that's OK as subsequent iterations of +// the encoding loop will fix up the copy overrun, and this inputMargin ensures +// that we don't overrun the dst and src buffers. +const inputMargin = 16 - 1 + +// minNonLiteralBlockSize is the minimum size of the input to encodeBlock that +// could be encoded with a copy tag. This is the minimum with respect to the +// algorithm used by encodeBlock, not a minimum enforced by the file format. +// +// The encoded output must start with at least a 1 byte literal, as there are +// no previous bytes to copy. A minimal (1 byte) copy after that, generated +// from an emitCopy call in encodeBlock's main loop, would require at least +// another inputMargin bytes, for the reason above: we want any emitLiteral +// calls inside encodeBlock's main loop to use the fast path if possible, which +// requires being able to overrun by inputMargin bytes. Thus, +// minNonLiteralBlockSize equals 1 + 1 + inputMargin. +// +// The C++ code doesn't use this exact threshold, but it could, as discussed at +// https://groups.google.com/d/topic/snappy-compression/oGbhsdIJSJ8/discussion +// The difference between Go (2+inputMargin) and C++ (inputMargin) is purely an +// optimization. It should not affect the encoded form. This is tested by +// TestSameEncodingAsCppShortCopies. +const minNonLiteralBlockSize = 1 + 1 + inputMargin + +// MaxEncodedLen returns the maximum length of a snappy block, given its +// uncompressed length. +// +// It will return a negative value if srcLen is too large to encode. +func MaxEncodedLen(srcLen int) int { + n := uint64(srcLen) + if n > 0xffffffff { + return -1 + } + // Compressed data can be defined as: + // compressed := item* literal* + // item := literal* copy + // + // The trailing literal sequence has a space blowup of at most 62/60 + // since a literal of length 60 needs one tag byte + one extra byte + // for length information. + // + // Item blowup is trickier to measure. Suppose the "copy" op copies + // 4 bytes of data. Because of a special check in the encoding code, + // we produce a 4-byte copy only if the offset is < 65536. Therefore + // the copy op takes 3 bytes to encode, and this type of item leads + // to at most the 62/60 blowup for representing literals. + // + // Suppose the "copy" op copies 5 bytes of data. If the offset is big + // enough, it will take 5 bytes to encode the copy op. Therefore the + // worst case here is a one-byte literal followed by a five-byte copy. + // That is, 6 bytes of input turn into 7 bytes of "compressed" data. + // + // This last factor dominates the blowup, so the final estimate is: + n = 32 + n + n/6 + if n > 0xffffffff { + return -1 + } + return int(n) +} + +var errClosed = errors.New("snappy: Writer is closed") + +// NewWriter returns a new Writer that compresses to w. +// +// The Writer returned does not buffer writes. There is no need to Flush or +// Close such a Writer. +// +// Deprecated: the Writer returned is not suitable for many small writes, only +// for few large writes. Use NewBufferedWriter instead, which is efficient +// regardless of the frequency and shape of the writes, and remember to Close +// that Writer when done. +func NewWriter(w io.Writer) *Writer { + return &Writer{ + w: w, + obuf: make([]byte, obufLen), + } +} + +// NewBufferedWriter returns a new Writer that compresses to w, using the +// framing format described at +// https://github.com/google/snappy/blob/master/framing_format.txt +// +// The Writer returned buffers writes. Users must call Close to guarantee all +// data has been forwarded to the underlying io.Writer. They may also call +// Flush zero or more times before calling Close. +func NewBufferedWriter(w io.Writer) *Writer { + return &Writer{ + w: w, + ibuf: make([]byte, 0, maxBlockSize), + obuf: make([]byte, obufLen), + } +} + +// Writer is an io.Writer that can write Snappy-compressed bytes. +type Writer struct { + w io.Writer + err error + + // ibuf is a buffer for the incoming (uncompressed) bytes. + // + // Its use is optional. For backwards compatibility, Writers created by the + // NewWriter function have ibuf == nil, do not buffer incoming bytes, and + // therefore do not need to be Flush'ed or Close'd. + ibuf []byte + + // obuf is a buffer for the outgoing (compressed) bytes. + obuf []byte + + // wroteStreamHeader is whether we have written the stream header. + wroteStreamHeader bool +} + +// Reset discards the writer's state and switches the Snappy writer to write to +// w. This permits reusing a Writer rather than allocating a new one. +func (w *Writer) Reset(writer io.Writer) { + w.w = writer + w.err = nil + if w.ibuf != nil { + w.ibuf = w.ibuf[:0] + } + w.wroteStreamHeader = false +} + +// Write satisfies the io.Writer interface. +func (w *Writer) Write(p []byte) (nRet int, errRet error) { + if w.ibuf == nil { + // Do not buffer incoming bytes. This does not perform or compress well + // if the caller of Writer.Write writes many small slices. This + // behavior is therefore deprecated, but still supported for backwards + // compatibility with code that doesn't explicitly Flush or Close. + return w.write(p) + } + + // The remainder of this method is based on bufio.Writer.Write from the + // standard library. + + for len(p) > (cap(w.ibuf)-len(w.ibuf)) && w.err == nil { + var n int + if len(w.ibuf) == 0 { + // Large write, empty buffer. + // Write directly from p to avoid copy. + n, _ = w.write(p) + } else { + n = copy(w.ibuf[len(w.ibuf):cap(w.ibuf)], p) + w.ibuf = w.ibuf[:len(w.ibuf)+n] + w.Flush() + } + nRet += n + p = p[n:] + } + if w.err != nil { + return nRet, w.err + } + n := copy(w.ibuf[len(w.ibuf):cap(w.ibuf)], p) + w.ibuf = w.ibuf[:len(w.ibuf)+n] + nRet += n + return nRet, nil +} + +func (w *Writer) write(p []byte) (nRet int, errRet error) { + if w.err != nil { + return 0, w.err + } + for len(p) > 0 { + obufStart := len(magicChunk) + if !w.wroteStreamHeader { + w.wroteStreamHeader = true + copy(w.obuf, magicChunk) + obufStart = 0 + } + + var uncompressed []byte + if len(p) > maxBlockSize { + uncompressed, p = p[:maxBlockSize], p[maxBlockSize:] + } else { + uncompressed, p = p, nil + } + checksum := crc(uncompressed) + + // Compress the buffer, discarding the result if the improvement + // isn't at least 12.5%. + compressed := Encode(w.obuf[obufHeaderLen:], uncompressed) + chunkType := uint8(chunkTypeCompressedData) + chunkLen := 4 + len(compressed) + obufEnd := obufHeaderLen + len(compressed) + if len(compressed) >= len(uncompressed)-len(uncompressed)/8 { + chunkType = chunkTypeUncompressedData + chunkLen = 4 + len(uncompressed) + obufEnd = obufHeaderLen + } + + // Fill in the per-chunk header that comes before the body. + w.obuf[len(magicChunk)+0] = chunkType + w.obuf[len(magicChunk)+1] = uint8(chunkLen >> 0) + w.obuf[len(magicChunk)+2] = uint8(chunkLen >> 8) + w.obuf[len(magicChunk)+3] = uint8(chunkLen >> 16) + w.obuf[len(magicChunk)+4] = uint8(checksum >> 0) + w.obuf[len(magicChunk)+5] = uint8(checksum >> 8) + w.obuf[len(magicChunk)+6] = uint8(checksum >> 16) + w.obuf[len(magicChunk)+7] = uint8(checksum >> 24) + + if _, err := w.w.Write(w.obuf[obufStart:obufEnd]); err != nil { + w.err = err + return nRet, err + } + if chunkType == chunkTypeUncompressedData { + if _, err := w.w.Write(uncompressed); err != nil { + w.err = err + return nRet, err + } + } + nRet += len(uncompressed) + } + return nRet, nil +} + +// Flush flushes the Writer to its underlying io.Writer. +func (w *Writer) Flush() error { + if w.err != nil { + return w.err + } + if len(w.ibuf) == 0 { + return nil + } + w.write(w.ibuf) + w.ibuf = w.ibuf[:0] + return w.err +} + +// Close calls Flush and then closes the Writer. +func (w *Writer) Close() error { + w.Flush() + ret := w.err + if w.err == nil { + w.err = errClosed + } + return ret +} diff --git a/vendor/github.com/klauspost/compress/snappy/encode_amd64.go b/vendor/github.com/klauspost/compress/snappy/encode_amd64.go new file mode 100644 index 000000000..150d91bc8 --- /dev/null +++ b/vendor/github.com/klauspost/compress/snappy/encode_amd64.go @@ -0,0 +1,29 @@ +// Copyright 2016 The Snappy-Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// +build !appengine +// +build gc +// +build !noasm + +package snappy + +// emitLiteral has the same semantics as in encode_other.go. +// +//go:noescape +func emitLiteral(dst, lit []byte) int + +// emitCopy has the same semantics as in encode_other.go. +// +//go:noescape +func emitCopy(dst []byte, offset, length int) int + +// extendMatch has the same semantics as in encode_other.go. +// +//go:noescape +func extendMatch(src []byte, i, j int) int + +// encodeBlock has the same semantics as in encode_other.go. +// +//go:noescape +func encodeBlock(dst, src []byte) (d int) diff --git a/vendor/github.com/klauspost/compress/snappy/encode_amd64.s b/vendor/github.com/klauspost/compress/snappy/encode_amd64.s new file mode 100644 index 000000000..adfd979fe --- /dev/null +++ b/vendor/github.com/klauspost/compress/snappy/encode_amd64.s @@ -0,0 +1,730 @@ +// Copyright 2016 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// +build !appengine +// +build gc +// +build !noasm + +#include "textflag.h" + +// The XXX lines assemble on Go 1.4, 1.5 and 1.7, but not 1.6, due to a +// Go toolchain regression. See https://github.com/golang/go/issues/15426 and +// https://github.com/golang/snappy/issues/29 +// +// As a workaround, the package was built with a known good assembler, and +// those instructions were disassembled by "objdump -d" to yield the +// 4e 0f b7 7c 5c 78 movzwq 0x78(%rsp,%r11,2),%r15 +// style comments, in AT&T asm syntax. Note that rsp here is a physical +// register, not Go/asm's SP pseudo-register (see https://golang.org/doc/asm). +// The instructions were then encoded as "BYTE $0x.." sequences, which assemble +// fine on Go 1.6. + +// The asm code generally follows the pure Go code in encode_other.go, except +// where marked with a "!!!". + +// ---------------------------------------------------------------------------- + +// func emitLiteral(dst, lit []byte) int +// +// All local variables fit into registers. The register allocation: +// - AX len(lit) +// - BX n +// - DX return value +// - DI &dst[i] +// - R10 &lit[0] +// +// The 24 bytes of stack space is to call runtime·memmove. +// +// The unusual register allocation of local variables, such as R10 for the +// source pointer, matches the allocation used at the call site in encodeBlock, +// which makes it easier to manually inline this function. +TEXT ·emitLiteral(SB), NOSPLIT, $24-56 + MOVQ dst_base+0(FP), DI + MOVQ lit_base+24(FP), R10 + MOVQ lit_len+32(FP), AX + MOVQ AX, DX + MOVL AX, BX + SUBL $1, BX + + CMPL BX, $60 + JLT oneByte + CMPL BX, $256 + JLT twoBytes + +threeBytes: + MOVB $0xf4, 0(DI) + MOVW BX, 1(DI) + ADDQ $3, DI + ADDQ $3, DX + JMP memmove + +twoBytes: + MOVB $0xf0, 0(DI) + MOVB BX, 1(DI) + ADDQ $2, DI + ADDQ $2, DX + JMP memmove + +oneByte: + SHLB $2, BX + MOVB BX, 0(DI) + ADDQ $1, DI + ADDQ $1, DX + +memmove: + MOVQ DX, ret+48(FP) + + // copy(dst[i:], lit) + // + // This means calling runtime·memmove(&dst[i], &lit[0], len(lit)), so we push + // DI, R10 and AX as arguments. + MOVQ DI, 0(SP) + MOVQ R10, 8(SP) + MOVQ AX, 16(SP) + CALL runtime·memmove(SB) + RET + +// ---------------------------------------------------------------------------- + +// func emitCopy(dst []byte, offset, length int) int +// +// All local variables fit into registers. The register allocation: +// - AX length +// - SI &dst[0] +// - DI &dst[i] +// - R11 offset +// +// The unusual register allocation of local variables, such as R11 for the +// offset, matches the allocation used at the call site in encodeBlock, which +// makes it easier to manually inline this function. +TEXT ·emitCopy(SB), NOSPLIT, $0-48 + MOVQ dst_base+0(FP), DI + MOVQ DI, SI + MOVQ offset+24(FP), R11 + MOVQ length+32(FP), AX + +loop0: + // for length >= 68 { etc } + CMPL AX, $68 + JLT step1 + + // Emit a length 64 copy, encoded as 3 bytes. + MOVB $0xfe, 0(DI) + MOVW R11, 1(DI) + ADDQ $3, DI + SUBL $64, AX + JMP loop0 + +step1: + // if length > 64 { etc } + CMPL AX, $64 + JLE step2 + + // Emit a length 60 copy, encoded as 3 bytes. + MOVB $0xee, 0(DI) + MOVW R11, 1(DI) + ADDQ $3, DI + SUBL $60, AX + +step2: + // if length >= 12 || offset >= 2048 { goto step3 } + CMPL AX, $12 + JGE step3 + CMPL R11, $2048 + JGE step3 + + // Emit the remaining copy, encoded as 2 bytes. + MOVB R11, 1(DI) + SHRL $8, R11 + SHLB $5, R11 + SUBB $4, AX + SHLB $2, AX + ORB AX, R11 + ORB $1, R11 + MOVB R11, 0(DI) + ADDQ $2, DI + + // Return the number of bytes written. + SUBQ SI, DI + MOVQ DI, ret+40(FP) + RET + +step3: + // Emit the remaining copy, encoded as 3 bytes. + SUBL $1, AX + SHLB $2, AX + ORB $2, AX + MOVB AX, 0(DI) + MOVW R11, 1(DI) + ADDQ $3, DI + + // Return the number of bytes written. + SUBQ SI, DI + MOVQ DI, ret+40(FP) + RET + +// ---------------------------------------------------------------------------- + +// func extendMatch(src []byte, i, j int) int +// +// All local variables fit into registers. The register allocation: +// - DX &src[0] +// - SI &src[j] +// - R13 &src[len(src) - 8] +// - R14 &src[len(src)] +// - R15 &src[i] +// +// The unusual register allocation of local variables, such as R15 for a source +// pointer, matches the allocation used at the call site in encodeBlock, which +// makes it easier to manually inline this function. +TEXT ·extendMatch(SB), NOSPLIT, $0-48 + MOVQ src_base+0(FP), DX + MOVQ src_len+8(FP), R14 + MOVQ i+24(FP), R15 + MOVQ j+32(FP), SI + ADDQ DX, R14 + ADDQ DX, R15 + ADDQ DX, SI + MOVQ R14, R13 + SUBQ $8, R13 + +cmp8: + // As long as we are 8 or more bytes before the end of src, we can load and + // compare 8 bytes at a time. If those 8 bytes are equal, repeat. + CMPQ SI, R13 + JA cmp1 + MOVQ (R15), AX + MOVQ (SI), BX + CMPQ AX, BX + JNE bsf + ADDQ $8, R15 + ADDQ $8, SI + JMP cmp8 + +bsf: + // If those 8 bytes were not equal, XOR the two 8 byte values, and return + // the index of the first byte that differs. The BSF instruction finds the + // least significant 1 bit, the amd64 architecture is little-endian, and + // the shift by 3 converts a bit index to a byte index. + XORQ AX, BX + BSFQ BX, BX + SHRQ $3, BX + ADDQ BX, SI + + // Convert from &src[ret] to ret. + SUBQ DX, SI + MOVQ SI, ret+40(FP) + RET + +cmp1: + // In src's tail, compare 1 byte at a time. + CMPQ SI, R14 + JAE extendMatchEnd + MOVB (R15), AX + MOVB (SI), BX + CMPB AX, BX + JNE extendMatchEnd + ADDQ $1, R15 + ADDQ $1, SI + JMP cmp1 + +extendMatchEnd: + // Convert from &src[ret] to ret. + SUBQ DX, SI + MOVQ SI, ret+40(FP) + RET + +// ---------------------------------------------------------------------------- + +// func encodeBlock(dst, src []byte) (d int) +// +// All local variables fit into registers, other than "var table". The register +// allocation: +// - AX . . +// - BX . . +// - CX 56 shift (note that amd64 shifts by non-immediates must use CX). +// - DX 64 &src[0], tableSize +// - SI 72 &src[s] +// - DI 80 &dst[d] +// - R9 88 sLimit +// - R10 . &src[nextEmit] +// - R11 96 prevHash, currHash, nextHash, offset +// - R12 104 &src[base], skip +// - R13 . &src[nextS], &src[len(src) - 8] +// - R14 . len(src), bytesBetweenHashLookups, &src[len(src)], x +// - R15 112 candidate +// +// The second column (56, 64, etc) is the stack offset to spill the registers +// when calling other functions. We could pack this slightly tighter, but it's +// simpler to have a dedicated spill map independent of the function called. +// +// "var table [maxTableSize]uint16" takes up 32768 bytes of stack space. An +// extra 56 bytes, to call other functions, and an extra 64 bytes, to spill +// local variables (registers) during calls gives 32768 + 56 + 64 = 32888. +TEXT ·encodeBlock(SB), 0, $32888-56 + MOVQ dst_base+0(FP), DI + MOVQ src_base+24(FP), SI + MOVQ src_len+32(FP), R14 + + // shift, tableSize := uint32(32-8), 1<<8 + MOVQ $24, CX + MOVQ $256, DX + +calcShift: + // for ; tableSize < maxTableSize && tableSize < len(src); tableSize *= 2 { + // shift-- + // } + CMPQ DX, $16384 + JGE varTable + CMPQ DX, R14 + JGE varTable + SUBQ $1, CX + SHLQ $1, DX + JMP calcShift + +varTable: + // var table [maxTableSize]uint16 + // + // In the asm code, unlike the Go code, we can zero-initialize only the + // first tableSize elements. Each uint16 element is 2 bytes and each MOVOU + // writes 16 bytes, so we can do only tableSize/8 writes instead of the + // 2048 writes that would zero-initialize all of table's 32768 bytes. + SHRQ $3, DX + LEAQ table-32768(SP), BX + PXOR X0, X0 + +memclr: + MOVOU X0, 0(BX) + ADDQ $16, BX + SUBQ $1, DX + JNZ memclr + + // !!! DX = &src[0] + MOVQ SI, DX + + // sLimit := len(src) - inputMargin + MOVQ R14, R9 + SUBQ $15, R9 + + // !!! Pre-emptively spill CX, DX and R9 to the stack. Their values don't + // change for the rest of the function. + MOVQ CX, 56(SP) + MOVQ DX, 64(SP) + MOVQ R9, 88(SP) + + // nextEmit := 0 + MOVQ DX, R10 + + // s := 1 + ADDQ $1, SI + + // nextHash := hash(load32(src, s), shift) + MOVL 0(SI), R11 + IMULL $0x1e35a7bd, R11 + SHRL CX, R11 + +outer: + // for { etc } + + // skip := 32 + MOVQ $32, R12 + + // nextS := s + MOVQ SI, R13 + + // candidate := 0 + MOVQ $0, R15 + +inner0: + // for { etc } + + // s := nextS + MOVQ R13, SI + + // bytesBetweenHashLookups := skip >> 5 + MOVQ R12, R14 + SHRQ $5, R14 + + // nextS = s + bytesBetweenHashLookups + ADDQ R14, R13 + + // skip += bytesBetweenHashLookups + ADDQ R14, R12 + + // if nextS > sLimit { goto emitRemainder } + MOVQ R13, AX + SUBQ DX, AX + CMPQ AX, R9 + JA emitRemainder + + // candidate = int(table[nextHash]) + // XXX: MOVWQZX table-32768(SP)(R11*2), R15 + // XXX: 4e 0f b7 7c 5c 78 movzwq 0x78(%rsp,%r11,2),%r15 + BYTE $0x4e + BYTE $0x0f + BYTE $0xb7 + BYTE $0x7c + BYTE $0x5c + BYTE $0x78 + + // table[nextHash] = uint16(s) + MOVQ SI, AX + SUBQ DX, AX + + // XXX: MOVW AX, table-32768(SP)(R11*2) + // XXX: 66 42 89 44 5c 78 mov %ax,0x78(%rsp,%r11,2) + BYTE $0x66 + BYTE $0x42 + BYTE $0x89 + BYTE $0x44 + BYTE $0x5c + BYTE $0x78 + + // nextHash = hash(load32(src, nextS), shift) + MOVL 0(R13), R11 + IMULL $0x1e35a7bd, R11 + SHRL CX, R11 + + // if load32(src, s) != load32(src, candidate) { continue } break + MOVL 0(SI), AX + MOVL (DX)(R15*1), BX + CMPL AX, BX + JNE inner0 + +fourByteMatch: + // As per the encode_other.go code: + // + // A 4-byte match has been found. We'll later see etc. + + // !!! Jump to a fast path for short (<= 16 byte) literals. See the comment + // on inputMargin in encode.go. + MOVQ SI, AX + SUBQ R10, AX + CMPQ AX, $16 + JLE emitLiteralFastPath + + // ---------------------------------------- + // Begin inline of the emitLiteral call. + // + // d += emitLiteral(dst[d:], src[nextEmit:s]) + + MOVL AX, BX + SUBL $1, BX + + CMPL BX, $60 + JLT inlineEmitLiteralOneByte + CMPL BX, $256 + JLT inlineEmitLiteralTwoBytes + +inlineEmitLiteralThreeBytes: + MOVB $0xf4, 0(DI) + MOVW BX, 1(DI) + ADDQ $3, DI + JMP inlineEmitLiteralMemmove + +inlineEmitLiteralTwoBytes: + MOVB $0xf0, 0(DI) + MOVB BX, 1(DI) + ADDQ $2, DI + JMP inlineEmitLiteralMemmove + +inlineEmitLiteralOneByte: + SHLB $2, BX + MOVB BX, 0(DI) + ADDQ $1, DI + +inlineEmitLiteralMemmove: + // Spill local variables (registers) onto the stack; call; unspill. + // + // copy(dst[i:], lit) + // + // This means calling runtime·memmove(&dst[i], &lit[0], len(lit)), so we push + // DI, R10 and AX as arguments. + MOVQ DI, 0(SP) + MOVQ R10, 8(SP) + MOVQ AX, 16(SP) + ADDQ AX, DI // Finish the "d +=" part of "d += emitLiteral(etc)". + MOVQ SI, 72(SP) + MOVQ DI, 80(SP) + MOVQ R15, 112(SP) + CALL runtime·memmove(SB) + MOVQ 56(SP), CX + MOVQ 64(SP), DX + MOVQ 72(SP), SI + MOVQ 80(SP), DI + MOVQ 88(SP), R9 + MOVQ 112(SP), R15 + JMP inner1 + +inlineEmitLiteralEnd: + // End inline of the emitLiteral call. + // ---------------------------------------- + +emitLiteralFastPath: + // !!! Emit the 1-byte encoding "uint8(len(lit)-1)<<2". + MOVB AX, BX + SUBB $1, BX + SHLB $2, BX + MOVB BX, (DI) + ADDQ $1, DI + + // !!! Implement the copy from lit to dst as a 16-byte load and store. + // (Encode's documentation says that dst and src must not overlap.) + // + // This always copies 16 bytes, instead of only len(lit) bytes, but that's + // OK. Subsequent iterations will fix up the overrun. + // + // Note that on amd64, it is legal and cheap to issue unaligned 8-byte or + // 16-byte loads and stores. This technique probably wouldn't be as + // effective on architectures that are fussier about alignment. + MOVOU 0(R10), X0 + MOVOU X0, 0(DI) + ADDQ AX, DI + +inner1: + // for { etc } + + // base := s + MOVQ SI, R12 + + // !!! offset := base - candidate + MOVQ R12, R11 + SUBQ R15, R11 + SUBQ DX, R11 + + // ---------------------------------------- + // Begin inline of the extendMatch call. + // + // s = extendMatch(src, candidate+4, s+4) + + // !!! R14 = &src[len(src)] + MOVQ src_len+32(FP), R14 + ADDQ DX, R14 + + // !!! R13 = &src[len(src) - 8] + MOVQ R14, R13 + SUBQ $8, R13 + + // !!! R15 = &src[candidate + 4] + ADDQ $4, R15 + ADDQ DX, R15 + + // !!! s += 4 + ADDQ $4, SI + +inlineExtendMatchCmp8: + // As long as we are 8 or more bytes before the end of src, we can load and + // compare 8 bytes at a time. If those 8 bytes are equal, repeat. + CMPQ SI, R13 + JA inlineExtendMatchCmp1 + MOVQ (R15), AX + MOVQ (SI), BX + CMPQ AX, BX + JNE inlineExtendMatchBSF + ADDQ $8, R15 + ADDQ $8, SI + JMP inlineExtendMatchCmp8 + +inlineExtendMatchBSF: + // If those 8 bytes were not equal, XOR the two 8 byte values, and return + // the index of the first byte that differs. The BSF instruction finds the + // least significant 1 bit, the amd64 architecture is little-endian, and + // the shift by 3 converts a bit index to a byte index. + XORQ AX, BX + BSFQ BX, BX + SHRQ $3, BX + ADDQ BX, SI + JMP inlineExtendMatchEnd + +inlineExtendMatchCmp1: + // In src's tail, compare 1 byte at a time. + CMPQ SI, R14 + JAE inlineExtendMatchEnd + MOVB (R15), AX + MOVB (SI), BX + CMPB AX, BX + JNE inlineExtendMatchEnd + ADDQ $1, R15 + ADDQ $1, SI + JMP inlineExtendMatchCmp1 + +inlineExtendMatchEnd: + // End inline of the extendMatch call. + // ---------------------------------------- + + // ---------------------------------------- + // Begin inline of the emitCopy call. + // + // d += emitCopy(dst[d:], base-candidate, s-base) + + // !!! length := s - base + MOVQ SI, AX + SUBQ R12, AX + +inlineEmitCopyLoop0: + // for length >= 68 { etc } + CMPL AX, $68 + JLT inlineEmitCopyStep1 + + // Emit a length 64 copy, encoded as 3 bytes. + MOVB $0xfe, 0(DI) + MOVW R11, 1(DI) + ADDQ $3, DI + SUBL $64, AX + JMP inlineEmitCopyLoop0 + +inlineEmitCopyStep1: + // if length > 64 { etc } + CMPL AX, $64 + JLE inlineEmitCopyStep2 + + // Emit a length 60 copy, encoded as 3 bytes. + MOVB $0xee, 0(DI) + MOVW R11, 1(DI) + ADDQ $3, DI + SUBL $60, AX + +inlineEmitCopyStep2: + // if length >= 12 || offset >= 2048 { goto inlineEmitCopyStep3 } + CMPL AX, $12 + JGE inlineEmitCopyStep3 + CMPL R11, $2048 + JGE inlineEmitCopyStep3 + + // Emit the remaining copy, encoded as 2 bytes. + MOVB R11, 1(DI) + SHRL $8, R11 + SHLB $5, R11 + SUBB $4, AX + SHLB $2, AX + ORB AX, R11 + ORB $1, R11 + MOVB R11, 0(DI) + ADDQ $2, DI + JMP inlineEmitCopyEnd + +inlineEmitCopyStep3: + // Emit the remaining copy, encoded as 3 bytes. + SUBL $1, AX + SHLB $2, AX + ORB $2, AX + MOVB AX, 0(DI) + MOVW R11, 1(DI) + ADDQ $3, DI + +inlineEmitCopyEnd: + // End inline of the emitCopy call. + // ---------------------------------------- + + // nextEmit = s + MOVQ SI, R10 + + // if s >= sLimit { goto emitRemainder } + MOVQ SI, AX + SUBQ DX, AX + CMPQ AX, R9 + JAE emitRemainder + + // As per the encode_other.go code: + // + // We could immediately etc. + + // x := load64(src, s-1) + MOVQ -1(SI), R14 + + // prevHash := hash(uint32(x>>0), shift) + MOVL R14, R11 + IMULL $0x1e35a7bd, R11 + SHRL CX, R11 + + // table[prevHash] = uint16(s-1) + MOVQ SI, AX + SUBQ DX, AX + SUBQ $1, AX + + // XXX: MOVW AX, table-32768(SP)(R11*2) + // XXX: 66 42 89 44 5c 78 mov %ax,0x78(%rsp,%r11,2) + BYTE $0x66 + BYTE $0x42 + BYTE $0x89 + BYTE $0x44 + BYTE $0x5c + BYTE $0x78 + + // currHash := hash(uint32(x>>8), shift) + SHRQ $8, R14 + MOVL R14, R11 + IMULL $0x1e35a7bd, R11 + SHRL CX, R11 + + // candidate = int(table[currHash]) + // XXX: MOVWQZX table-32768(SP)(R11*2), R15 + // XXX: 4e 0f b7 7c 5c 78 movzwq 0x78(%rsp,%r11,2),%r15 + BYTE $0x4e + BYTE $0x0f + BYTE $0xb7 + BYTE $0x7c + BYTE $0x5c + BYTE $0x78 + + // table[currHash] = uint16(s) + ADDQ $1, AX + + // XXX: MOVW AX, table-32768(SP)(R11*2) + // XXX: 66 42 89 44 5c 78 mov %ax,0x78(%rsp,%r11,2) + BYTE $0x66 + BYTE $0x42 + BYTE $0x89 + BYTE $0x44 + BYTE $0x5c + BYTE $0x78 + + // if uint32(x>>8) == load32(src, candidate) { continue } + MOVL (DX)(R15*1), BX + CMPL R14, BX + JEQ inner1 + + // nextHash = hash(uint32(x>>16), shift) + SHRQ $8, R14 + MOVL R14, R11 + IMULL $0x1e35a7bd, R11 + SHRL CX, R11 + + // s++ + ADDQ $1, SI + + // break out of the inner1 for loop, i.e. continue the outer loop. + JMP outer + +emitRemainder: + // if nextEmit < len(src) { etc } + MOVQ src_len+32(FP), AX + ADDQ DX, AX + CMPQ R10, AX + JEQ encodeBlockEnd + + // d += emitLiteral(dst[d:], src[nextEmit:]) + // + // Push args. + MOVQ DI, 0(SP) + MOVQ $0, 8(SP) // Unnecessary, as the callee ignores it, but conservative. + MOVQ $0, 16(SP) // Unnecessary, as the callee ignores it, but conservative. + MOVQ R10, 24(SP) + SUBQ R10, AX + MOVQ AX, 32(SP) + MOVQ AX, 40(SP) // Unnecessary, as the callee ignores it, but conservative. + + // Spill local variables (registers) onto the stack; call; unspill. + MOVQ DI, 80(SP) + CALL ·emitLiteral(SB) + MOVQ 80(SP), DI + + // Finish the "d +=" part of "d += emitLiteral(etc)". + ADDQ 48(SP), DI + +encodeBlockEnd: + MOVQ dst_base+0(FP), AX + SUBQ AX, DI + MOVQ DI, d+48(FP) + RET diff --git a/vendor/github.com/klauspost/compress/snappy/encode_other.go b/vendor/github.com/klauspost/compress/snappy/encode_other.go new file mode 100644 index 000000000..dbcae905e --- /dev/null +++ b/vendor/github.com/klauspost/compress/snappy/encode_other.go @@ -0,0 +1,238 @@ +// Copyright 2016 The Snappy-Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// +build !amd64 appengine !gc noasm + +package snappy + +func load32(b []byte, i int) uint32 { + b = b[i : i+4 : len(b)] // Help the compiler eliminate bounds checks on the next line. + return uint32(b[0]) | uint32(b[1])<<8 | uint32(b[2])<<16 | uint32(b[3])<<24 +} + +func load64(b []byte, i int) uint64 { + b = b[i : i+8 : len(b)] // Help the compiler eliminate bounds checks on the next line. + return uint64(b[0]) | uint64(b[1])<<8 | uint64(b[2])<<16 | uint64(b[3])<<24 | + uint64(b[4])<<32 | uint64(b[5])<<40 | uint64(b[6])<<48 | uint64(b[7])<<56 +} + +// emitLiteral writes a literal chunk and returns the number of bytes written. +// +// It assumes that: +// dst is long enough to hold the encoded bytes +// 1 <= len(lit) && len(lit) <= 65536 +func emitLiteral(dst, lit []byte) int { + i, n := 0, uint(len(lit)-1) + switch { + case n < 60: + dst[0] = uint8(n)<<2 | tagLiteral + i = 1 + case n < 1<<8: + dst[0] = 60<<2 | tagLiteral + dst[1] = uint8(n) + i = 2 + default: + dst[0] = 61<<2 | tagLiteral + dst[1] = uint8(n) + dst[2] = uint8(n >> 8) + i = 3 + } + return i + copy(dst[i:], lit) +} + +// emitCopy writes a copy chunk and returns the number of bytes written. +// +// It assumes that: +// dst is long enough to hold the encoded bytes +// 1 <= offset && offset <= 65535 +// 4 <= length && length <= 65535 +func emitCopy(dst []byte, offset, length int) int { + i := 0 + // The maximum length for a single tagCopy1 or tagCopy2 op is 64 bytes. The + // threshold for this loop is a little higher (at 68 = 64 + 4), and the + // length emitted down below is is a little lower (at 60 = 64 - 4), because + // it's shorter to encode a length 67 copy as a length 60 tagCopy2 followed + // by a length 7 tagCopy1 (which encodes as 3+2 bytes) than to encode it as + // a length 64 tagCopy2 followed by a length 3 tagCopy2 (which encodes as + // 3+3 bytes). The magic 4 in the 64±4 is because the minimum length for a + // tagCopy1 op is 4 bytes, which is why a length 3 copy has to be an + // encodes-as-3-bytes tagCopy2 instead of an encodes-as-2-bytes tagCopy1. + for length >= 68 { + // Emit a length 64 copy, encoded as 3 bytes. + dst[i+0] = 63<<2 | tagCopy2 + dst[i+1] = uint8(offset) + dst[i+2] = uint8(offset >> 8) + i += 3 + length -= 64 + } + if length > 64 { + // Emit a length 60 copy, encoded as 3 bytes. + dst[i+0] = 59<<2 | tagCopy2 + dst[i+1] = uint8(offset) + dst[i+2] = uint8(offset >> 8) + i += 3 + length -= 60 + } + if length >= 12 || offset >= 2048 { + // Emit the remaining copy, encoded as 3 bytes. + dst[i+0] = uint8(length-1)<<2 | tagCopy2 + dst[i+1] = uint8(offset) + dst[i+2] = uint8(offset >> 8) + return i + 3 + } + // Emit the remaining copy, encoded as 2 bytes. + dst[i+0] = uint8(offset>>8)<<5 | uint8(length-4)<<2 | tagCopy1 + dst[i+1] = uint8(offset) + return i + 2 +} + +// extendMatch returns the largest k such that k <= len(src) and that +// src[i:i+k-j] and src[j:k] have the same contents. +// +// It assumes that: +// 0 <= i && i < j && j <= len(src) +func extendMatch(src []byte, i, j int) int { + for ; j < len(src) && src[i] == src[j]; i, j = i+1, j+1 { + } + return j +} + +func hash(u, shift uint32) uint32 { + return (u * 0x1e35a7bd) >> shift +} + +// encodeBlock encodes a non-empty src to a guaranteed-large-enough dst. It +// assumes that the varint-encoded length of the decompressed bytes has already +// been written. +// +// It also assumes that: +// len(dst) >= MaxEncodedLen(len(src)) && +// minNonLiteralBlockSize <= len(src) && len(src) <= maxBlockSize +func encodeBlock(dst, src []byte) (d int) { + // Initialize the hash table. Its size ranges from 1<<8 to 1<<14 inclusive. + // The table element type is uint16, as s < sLimit and sLimit < len(src) + // and len(src) <= maxBlockSize and maxBlockSize == 65536. + const ( + maxTableSize = 1 << 14 + // tableMask is redundant, but helps the compiler eliminate bounds + // checks. + tableMask = maxTableSize - 1 + ) + shift := uint32(32 - 8) + for tableSize := 1 << 8; tableSize < maxTableSize && tableSize < len(src); tableSize *= 2 { + shift-- + } + // In Go, all array elements are zero-initialized, so there is no advantage + // to a smaller tableSize per se. However, it matches the C++ algorithm, + // and in the asm versions of this code, we can get away with zeroing only + // the first tableSize elements. + var table [maxTableSize]uint16 + + // sLimit is when to stop looking for offset/length copies. The inputMargin + // lets us use a fast path for emitLiteral in the main loop, while we are + // looking for copies. + sLimit := len(src) - inputMargin + + // nextEmit is where in src the next emitLiteral should start from. + nextEmit := 0 + + // The encoded form must start with a literal, as there are no previous + // bytes to copy, so we start looking for hash matches at s == 1. + s := 1 + nextHash := hash(load32(src, s), shift) + + for { + // Copied from the C++ snappy implementation: + // + // Heuristic match skipping: If 32 bytes are scanned with no matches + // found, start looking only at every other byte. If 32 more bytes are + // scanned (or skipped), look at every third byte, etc.. When a match + // is found, immediately go back to looking at every byte. This is a + // small loss (~5% performance, ~0.1% density) for compressible data + // due to more bookkeeping, but for non-compressible data (such as + // JPEG) it's a huge win since the compressor quickly "realizes" the + // data is incompressible and doesn't bother looking for matches + // everywhere. + // + // The "skip" variable keeps track of how many bytes there are since + // the last match; dividing it by 32 (ie. right-shifting by five) gives + // the number of bytes to move ahead for each iteration. + skip := 32 + + nextS := s + candidate := 0 + for { + s = nextS + bytesBetweenHashLookups := skip >> 5 + nextS = s + bytesBetweenHashLookups + skip += bytesBetweenHashLookups + if nextS > sLimit { + goto emitRemainder + } + candidate = int(table[nextHash&tableMask]) + table[nextHash&tableMask] = uint16(s) + nextHash = hash(load32(src, nextS), shift) + if load32(src, s) == load32(src, candidate) { + break + } + } + + // A 4-byte match has been found. We'll later see if more than 4 bytes + // match. But, prior to the match, src[nextEmit:s] are unmatched. Emit + // them as literal bytes. + d += emitLiteral(dst[d:], src[nextEmit:s]) + + // Call emitCopy, and then see if another emitCopy could be our next + // move. Repeat until we find no match for the input immediately after + // what was consumed by the last emitCopy call. + // + // If we exit this loop normally then we need to call emitLiteral next, + // though we don't yet know how big the literal will be. We handle that + // by proceeding to the next iteration of the main loop. We also can + // exit this loop via goto if we get close to exhausting the input. + for { + // Invariant: we have a 4-byte match at s, and no need to emit any + // literal bytes prior to s. + base := s + + // Extend the 4-byte match as long as possible. + // + // This is an inlined version of: + // s = extendMatch(src, candidate+4, s+4) + s += 4 + for i := candidate + 4; s < len(src) && src[i] == src[s]; i, s = i+1, s+1 { + } + + d += emitCopy(dst[d:], base-candidate, s-base) + nextEmit = s + if s >= sLimit { + goto emitRemainder + } + + // We could immediately start working at s now, but to improve + // compression we first update the hash table at s-1 and at s. If + // another emitCopy is not our next move, also calculate nextHash + // at s+1. At least on GOARCH=amd64, these three hash calculations + // are faster as one load64 call (with some shifts) instead of + // three load32 calls. + x := load64(src, s-1) + prevHash := hash(uint32(x>>0), shift) + table[prevHash&tableMask] = uint16(s - 1) + currHash := hash(uint32(x>>8), shift) + candidate = int(table[currHash&tableMask]) + table[currHash&tableMask] = uint16(s) + if uint32(x>>8) != load32(src, candidate) { + nextHash = hash(uint32(x>>16), shift) + s++ + break + } + } + } + +emitRemainder: + if nextEmit < len(src) { + d += emitLiteral(dst[d:], src[nextEmit:]) + } + return d +} diff --git a/vendor/github.com/klauspost/compress/snappy/runbench.cmd b/vendor/github.com/klauspost/compress/snappy/runbench.cmd new file mode 100644 index 000000000..d24eb4b47 --- /dev/null +++ b/vendor/github.com/klauspost/compress/snappy/runbench.cmd @@ -0,0 +1,2 @@ +del old.txt +go test -bench=. >>old.txt && go test -bench=. >>old.txt && go test -bench=. >>old.txt && benchstat -delta-test=ttest old.txt new.txt diff --git a/vendor/github.com/klauspost/compress/snappy/snappy.go b/vendor/github.com/klauspost/compress/snappy/snappy.go new file mode 100644 index 000000000..74a36689e --- /dev/null +++ b/vendor/github.com/klauspost/compress/snappy/snappy.go @@ -0,0 +1,98 @@ +// Copyright 2011 The Snappy-Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// Package snappy implements the Snappy compression format. It aims for very +// high speeds and reasonable compression. +// +// There are actually two Snappy formats: block and stream. They are related, +// but different: trying to decompress block-compressed data as a Snappy stream +// will fail, and vice versa. The block format is the Decode and Encode +// functions and the stream format is the Reader and Writer types. +// +// The block format, the more common case, is used when the complete size (the +// number of bytes) of the original data is known upfront, at the time +// compression starts. The stream format, also known as the framing format, is +// for when that isn't always true. +// +// The canonical, C++ implementation is at https://github.com/google/snappy and +// it only implements the block format. +package snappy + +import ( + "hash/crc32" +) + +/* +Each encoded block begins with the varint-encoded length of the decoded data, +followed by a sequence of chunks. Chunks begin and end on byte boundaries. The +first byte of each chunk is broken into its 2 least and 6 most significant bits +called l and m: l ranges in [0, 4) and m ranges in [0, 64). l is the chunk tag. +Zero means a literal tag. All other values mean a copy tag. + +For literal tags: + - If m < 60, the next 1 + m bytes are literal bytes. + - Otherwise, let n be the little-endian unsigned integer denoted by the next + m - 59 bytes. The next 1 + n bytes after that are literal bytes. + +For copy tags, length bytes are copied from offset bytes ago, in the style of +Lempel-Ziv compression algorithms. In particular: + - For l == 1, the offset ranges in [0, 1<<11) and the length in [4, 12). + The length is 4 + the low 3 bits of m. The high 3 bits of m form bits 8-10 + of the offset. The next byte is bits 0-7 of the offset. + - For l == 2, the offset ranges in [0, 1<<16) and the length in [1, 65). + The length is 1 + m. The offset is the little-endian unsigned integer + denoted by the next 2 bytes. + - For l == 3, this tag is a legacy format that is no longer issued by most + encoders. Nonetheless, the offset ranges in [0, 1<<32) and the length in + [1, 65). The length is 1 + m. The offset is the little-endian unsigned + integer denoted by the next 4 bytes. +*/ +const ( + tagLiteral = 0x00 + tagCopy1 = 0x01 + tagCopy2 = 0x02 + tagCopy4 = 0x03 +) + +const ( + checksumSize = 4 + chunkHeaderSize = 4 + magicChunk = "\xff\x06\x00\x00" + magicBody + magicBody = "sNaPpY" + + // maxBlockSize is the maximum size of the input to encodeBlock. It is not + // part of the wire format per se, but some parts of the encoder assume + // that an offset fits into a uint16. + // + // Also, for the framing format (Writer type instead of Encode function), + // https://github.com/google/snappy/blob/master/framing_format.txt says + // that "the uncompressed data in a chunk must be no longer than 65536 + // bytes". + maxBlockSize = 65536 + + // maxEncodedLenOfMaxBlockSize equals MaxEncodedLen(maxBlockSize), but is + // hard coded to be a const instead of a variable, so that obufLen can also + // be a const. Their equivalence is confirmed by + // TestMaxEncodedLenOfMaxBlockSize. + maxEncodedLenOfMaxBlockSize = 76490 + + obufHeaderLen = len(magicChunk) + checksumSize + chunkHeaderSize + obufLen = obufHeaderLen + maxEncodedLenOfMaxBlockSize +) + +const ( + chunkTypeCompressedData = 0x00 + chunkTypeUncompressedData = 0x01 + chunkTypePadding = 0xfe + chunkTypeStreamIdentifier = 0xff +) + +var crcTable = crc32.MakeTable(crc32.Castagnoli) + +// crc implements the checksum specified in section 3 of +// https://github.com/google/snappy/blob/master/framing_format.txt +func crc(b []byte) uint32 { + c := crc32.Update(0, crcTable, b) + return uint32(c>>15|c<<17) + 0xa282ead8 +} -- cgit v1.2.3-54-g00ecf