From a031b83a09a8628435317a03f199cdc18b78262f Mon Sep 17 00:00:00 2001 From: Matthew Heon Date: Wed, 1 Nov 2017 11:24:59 -0400 Subject: Initial checkin from CRI-O repo Signed-off-by: Matthew Heon --- vendor/github.com/pquerna/ffjson/LICENSE | 202 +++++ vendor/github.com/pquerna/ffjson/NOTICE | 8 + vendor/github.com/pquerna/ffjson/README.md | 232 +++++ .../github.com/pquerna/ffjson/fflib/v1/buffer.go | 421 +++++++++ .../pquerna/ffjson/fflib/v1/buffer_nopool.go | 11 + .../pquerna/ffjson/fflib/v1/buffer_pool.go | 105 +++ .../github.com/pquerna/ffjson/fflib/v1/bytenum.go | 88 ++ .../github.com/pquerna/ffjson/fflib/v1/decimal.go | 378 +++++++++ .../github.com/pquerna/ffjson/fflib/v1/extfloat.go | 668 +++++++++++++++ vendor/github.com/pquerna/ffjson/fflib/v1/fold.go | 121 +++ vendor/github.com/pquerna/ffjson/fflib/v1/ftoa.go | 542 ++++++++++++ .../pquerna/ffjson/fflib/v1/internal/atof.go | 936 ++++++++++++++++++++ .../pquerna/ffjson/fflib/v1/internal/atoi.go | 213 +++++ .../pquerna/ffjson/fflib/v1/internal/extfloat.go | 668 +++++++++++++++ .../pquerna/ffjson/fflib/v1/internal/ftoa.go | 475 +++++++++++ vendor/github.com/pquerna/ffjson/fflib/v1/iota.go | 161 ++++ .../pquerna/ffjson/fflib/v1/jsonstring.go | 512 +++++++++++ vendor/github.com/pquerna/ffjson/fflib/v1/lexer.go | 937 +++++++++++++++++++++ .../github.com/pquerna/ffjson/fflib/v1/reader.go | 512 +++++++++++ .../pquerna/ffjson/fflib/v1/reader_scan_generic.go | 34 + 20 files changed, 7224 insertions(+) create mode 100644 vendor/github.com/pquerna/ffjson/LICENSE create mode 100644 vendor/github.com/pquerna/ffjson/NOTICE create mode 100644 vendor/github.com/pquerna/ffjson/README.md create mode 100644 vendor/github.com/pquerna/ffjson/fflib/v1/buffer.go create mode 100644 vendor/github.com/pquerna/ffjson/fflib/v1/buffer_nopool.go create mode 100644 vendor/github.com/pquerna/ffjson/fflib/v1/buffer_pool.go create mode 100644 vendor/github.com/pquerna/ffjson/fflib/v1/bytenum.go create mode 100644 vendor/github.com/pquerna/ffjson/fflib/v1/decimal.go create mode 100644 vendor/github.com/pquerna/ffjson/fflib/v1/extfloat.go create mode 100644 vendor/github.com/pquerna/ffjson/fflib/v1/fold.go create mode 100644 vendor/github.com/pquerna/ffjson/fflib/v1/ftoa.go create mode 100644 vendor/github.com/pquerna/ffjson/fflib/v1/internal/atof.go create mode 100644 vendor/github.com/pquerna/ffjson/fflib/v1/internal/atoi.go create mode 100644 vendor/github.com/pquerna/ffjson/fflib/v1/internal/extfloat.go create mode 100644 vendor/github.com/pquerna/ffjson/fflib/v1/internal/ftoa.go create mode 100644 vendor/github.com/pquerna/ffjson/fflib/v1/iota.go create mode 100644 vendor/github.com/pquerna/ffjson/fflib/v1/jsonstring.go create mode 100644 vendor/github.com/pquerna/ffjson/fflib/v1/lexer.go create mode 100644 vendor/github.com/pquerna/ffjson/fflib/v1/reader.go create mode 100644 vendor/github.com/pquerna/ffjson/fflib/v1/reader_scan_generic.go (limited to 'vendor/github.com/pquerna/ffjson') diff --git a/vendor/github.com/pquerna/ffjson/LICENSE b/vendor/github.com/pquerna/ffjson/LICENSE new file mode 100644 index 000000000..d64569567 --- /dev/null +++ b/vendor/github.com/pquerna/ffjson/LICENSE @@ -0,0 +1,202 @@ + + Apache License + Version 2.0, January 2004 + http://www.apache.org/licenses/ + + TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION + + 1. Definitions. + + "License" shall mean the terms and conditions for use, reproduction, + and distribution as defined by Sections 1 through 9 of this document. + + "Licensor" shall mean the copyright owner or entity authorized by + the copyright owner that is granting the License. + + "Legal Entity" shall mean the union of the acting entity and all + other entities that control, are controlled by, or are under common + control with that entity. For the purposes of this definition, + "control" means (i) the power, direct or indirect, to cause the + direction or management of such entity, whether by contract or + otherwise, or (ii) ownership of fifty percent (50%) or more of the + outstanding shares, or (iii) beneficial ownership of such entity. + + "You" (or "Your") shall mean an individual or Legal Entity + exercising permissions granted by this License. + + "Source" form shall mean the preferred form for making modifications, + including but not limited to software source code, documentation + source, and configuration files. + + "Object" form shall mean any form resulting from mechanical + transformation or translation of a Source form, including but + not limited to compiled object code, generated documentation, + and conversions to other media types. + + "Work" shall mean the work of authorship, whether in Source or + Object form, made available under the License, as indicated by a + copyright notice that is included in or attached to the work + (an example is provided in the Appendix below). + + "Derivative Works" shall mean any work, whether in Source or Object + form, that is based on (or derived from) the Work and for which the + editorial revisions, annotations, elaborations, or other modifications + represent, as a whole, an original work of authorship. For the purposes + of this License, Derivative Works shall not include works that remain + separable from, or merely link (or bind by name) to the interfaces of, + the Work and Derivative Works thereof. + + "Contribution" shall mean any work of authorship, including + the original version of the Work and any modifications or additions + to that Work or Derivative Works thereof, that is intentionally + submitted to Licensor for inclusion in the Work by the copyright owner + or by an individual or Legal Entity authorized to submit on behalf of + the copyright owner. For the purposes of this definition, "submitted" + means any form of electronic, verbal, or written communication sent + to the Licensor or its representatives, including but not limited to + communication on electronic mailing lists, source code control systems, + and issue tracking systems that are managed by, or on behalf of, the + Licensor for the purpose of discussing and improving the Work, but + excluding communication that is conspicuously marked or otherwise + designated in writing by the copyright owner as "Not a Contribution." + + "Contributor" shall mean Licensor and any individual or Legal Entity + on behalf of whom a Contribution has been received by Licensor and + subsequently incorporated within the Work. + + 2. Grant of Copyright License. Subject to the terms and conditions of + this License, each Contributor hereby grants to You a perpetual, + worldwide, non-exclusive, no-charge, royalty-free, irrevocable + copyright license to reproduce, prepare Derivative Works of, + publicly display, publicly perform, sublicense, and distribute the + Work and such Derivative Works in Source or Object form. + + 3. Grant of Patent License. Subject to the terms and conditions of + this License, each Contributor hereby grants to You a perpetual, + worldwide, non-exclusive, no-charge, royalty-free, irrevocable + (except as stated in this section) patent license to make, have made, + use, offer to sell, sell, import, and otherwise transfer the Work, + where such license applies only to those patent claims licensable + by such Contributor that are necessarily infringed by their + Contribution(s) alone or by combination of their Contribution(s) + with the Work to which such Contribution(s) was submitted. If You + institute patent litigation against any entity (including a + cross-claim or counterclaim in a lawsuit) alleging that the Work + or a Contribution incorporated within the Work constitutes direct + or contributory patent infringement, then any patent licenses + granted to You under this License for that Work shall terminate + as of the date such litigation is filed. + + 4. Redistribution. You may reproduce and distribute copies of the + Work or Derivative Works thereof in any medium, with or without + modifications, and in Source or Object form, provided that You + meet the following conditions: + + (a) You must give any other recipients of the Work or + Derivative Works a copy of this License; and + + (b) You must cause any modified files to carry prominent notices + stating that You changed the files; and + + (c) You must retain, in the Source form of any Derivative Works + that You distribute, all copyright, patent, trademark, and + attribution notices from the Source form of the Work, + excluding those notices that do not pertain to any part of + the Derivative Works; and + + (d) If the Work includes a "NOTICE" text file as part of its + distribution, then any Derivative Works that You distribute must + include a readable copy of the attribution notices contained + within such NOTICE file, excluding those notices that do not + pertain to any part of the Derivative Works, in at least one + of the following places: within a NOTICE text file distributed + as part of the Derivative Works; within the Source form or + documentation, if provided along with the Derivative Works; or, + within a display generated by the Derivative Works, if and + wherever such third-party notices normally appear. The contents + of the NOTICE file are for informational purposes only and + do not modify the License. You may add Your own attribution + notices within Derivative Works that You distribute, alongside + or as an addendum to the NOTICE text from the Work, provided + that such additional attribution notices cannot be construed + as modifying the License. + + You may add Your own copyright statement to Your modifications and + may provide additional or different license terms and conditions + for use, reproduction, or distribution of Your modifications, or + for any such Derivative Works as a whole, provided Your use, + reproduction, and distribution of the Work otherwise complies with + the conditions stated in this License. + + 5. Submission of Contributions. Unless You explicitly state otherwise, + any Contribution intentionally submitted for inclusion in the Work + by You to the Licensor shall be under the terms and conditions of + this License, without any additional terms or conditions. + Notwithstanding the above, nothing herein shall supersede or modify + the terms of any separate license agreement you may have executed + with Licensor regarding such Contributions. + + 6. Trademarks. This License does not grant permission to use the trade + names, trademarks, service marks, or product names of the Licensor, + except as required for reasonable and customary use in describing the + origin of the Work and reproducing the content of the NOTICE file. + + 7. Disclaimer of Warranty. Unless required by applicable law or + agreed to in writing, Licensor provides the Work (and each + Contributor provides its Contributions) on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or + implied, including, without limitation, any warranties or conditions + of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A + PARTICULAR PURPOSE. You are solely responsible for determining the + appropriateness of using or redistributing the Work and assume any + risks associated with Your exercise of permissions under this License. + + 8. Limitation of Liability. In no event and under no legal theory, + whether in tort (including negligence), contract, or otherwise, + unless required by applicable law (such as deliberate and grossly + negligent acts) or agreed to in writing, shall any Contributor be + liable to You for damages, including any direct, indirect, special, + incidental, or consequential damages of any character arising as a + result of this License or out of the use or inability to use the + Work (including but not limited to damages for loss of goodwill, + work stoppage, computer failure or malfunction, or any and all + other commercial damages or losses), even if such Contributor + has been advised of the possibility of such damages. + + 9. Accepting Warranty or Additional Liability. While redistributing + the Work or Derivative Works thereof, You may choose to offer, + and charge a fee for, acceptance of support, warranty, indemnity, + or other liability obligations and/or rights consistent with this + License. However, in accepting such obligations, You may act only + on Your own behalf and on Your sole responsibility, not on behalf + of any other Contributor, and only if You agree to indemnify, + defend, and hold each Contributor harmless for any liability + incurred by, or claims asserted against, such Contributor by reason + of your accepting any such warranty or additional liability. + + END OF TERMS AND CONDITIONS + + APPENDIX: How to apply the Apache License to your work. + + To apply the Apache License to your work, attach the following + boilerplate notice, with the fields enclosed by brackets "[]" + replaced with your own identifying information. (Don't include + the brackets!) The text should be enclosed in the appropriate + comment syntax for the file format. We also recommend that a + file or class name and description of purpose be included on the + same "printed page" as the copyright notice for easier + identification within third-party archives. + + Copyright [yyyy] [name of copyright owner] + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. diff --git a/vendor/github.com/pquerna/ffjson/NOTICE b/vendor/github.com/pquerna/ffjson/NOTICE new file mode 100644 index 000000000..405a49618 --- /dev/null +++ b/vendor/github.com/pquerna/ffjson/NOTICE @@ -0,0 +1,8 @@ +ffjson +Copyright (c) 2014, Paul Querna + +This product includes software developed by +Paul Querna (http://paul.querna.org/). + +Portions of this software were developed as +part of Go, Copyright (c) 2012 The Go Authors. \ No newline at end of file diff --git a/vendor/github.com/pquerna/ffjson/README.md b/vendor/github.com/pquerna/ffjson/README.md new file mode 100644 index 000000000..30b239f10 --- /dev/null +++ b/vendor/github.com/pquerna/ffjson/README.md @@ -0,0 +1,232 @@ +# ffjson: faster JSON for Go + +[![Build Status](https://travis-ci.org/pquerna/ffjson.svg?branch=master)](https://travis-ci.org/pquerna/ffjson) + +`ffjson` generates static `MarshalJSON` and `UnmarshalJSON` functions for structures in Go. The generated functions reduce the reliance upon runtime reflection to do serialization and are generally 2 to 3 times faster. In cases where `ffjson` doesn't understand a Type involved, it falls back to `encoding/json`, meaning it is a safe drop in replacement. By using `ffjson` your JSON serialization just gets faster with no additional code changes. + +When you change your `struct`, you will need to run `ffjson` again (or make it part of your build tools). + +## Blog Posts + +* 2014-03-31: [First Release and Background](https://journal.paul.querna.org/articles/2014/03/31/ffjson-faster-json-in-go/) + +## Getting Started + +If `myfile.go` contains the `struct` types you would like to be faster, and assuming `GOPATH` is set to a reasonable value for an existing project (meaning that in this particular example if `myfile.go` is in the `myproject` directory, the project should be under `$GOPATH/src/myproject`), you can just run: + + go get -u github.com/pquerna/ffjson + ffjson myfile.go + git add myfile_ffjson.go + + +## Performance Status: + +* `MarshalJSON` is **2x to 3x** faster than `encoding/json`. +* `UnmarshalJSON` is **2x to 3x** faster than `encoding/json`. + +## Features + +* **Unmarshal Support:** Since v0.9, `ffjson` supports Unmarshaling of structures. +* **Drop in Replacement:** Because `ffjson` implements the interfaces already defined by `encoding/json` the performance enhancements are transparent to users of your structures. +* **Supports all types:** `ffjson` has native support for most of Go's types -- for any type it doesn't support with fast paths, it falls back to using `encoding/json`. This means all structures should work out of the box. If they don't, [open a issue!](https://github.com/pquerna/ffjson/issues) +* **ffjson: skip**: If you have a structure you want `ffjson` to ignore, add `ffjson: skip` to the doc string for this structure. +* **Extensive Tests:** `ffjson` contains an extensive test suite including fuzz'ing against the JSON parser. + + +# Using ffjson + +`ffjson` generates code based upon existing `struct` types. For example, `ffjson foo.go` will by default create a new file `foo_ffjson.go` that contains serialization functions for all structs found in `foo.go`. + +``` +Usage of ffjson: + + ffjson [options] [input_file] + +ffjson generates Go code for optimized JSON serialization. + + -go-cmd="": Path to go command; Useful for `goapp` support. + -import-name="": Override import name in case it cannot be detected. + -nodecoder: Do not generate decoder functions + -noencoder: Do not generate encoder functions + -w="": Write generate code to this path instead of ${input}_ffjson.go. +``` + +Your code must be in a compilable state for `ffjson` to work. If you code doesn't compile ffjson will most likely exit with an error. + +## Disabling code generation for structs + +You might not want all your structs to have JSON code generated. To completely disable generation for a struct, add `ffjson: skip` to the struct comment. For example: + +```Go +// ffjson: skip +type Foo struct { + Bar string +} +``` + +You can also choose not to have either the decoder or encoder generated by including `ffjson: nodecoder` or `ffjson: noencoder` in your comment. For instance, this will only generate the encoder (marshal) part for this struct: + +```Go +// ffjson: nodecoder +type Foo struct { + Bar string +} +``` + +You can also disable encoders/decoders entirely for a file by using the `-noencoder`/`-nodecoder` commandline flags. + +## Using ffjson with `go generate` + +`ffjson` is a great fit with `go generate`. It allows you to specify the ffjson command inside your individual go files and run them all at once. This way you don't have to maintain a separate build file with the files you need to generate. + +Add this comment anywhere inside your go files: + +```Go +//go:generate ffjson $GOFILE +``` + +To re-generate ffjson for all files with the tag in a folder, simply execute: + +```sh +go generate +``` + +To generate for the current package and all sub-packages, use: + +```sh +go generate ./... +``` +This is most of what you need to know about go generate, but you can sese more about [go generate on the golang blog](http://blog.golang.org/generate). + +## Should I include ffjson files in VCS? + +That question is really up to you. If you don't, you will have a more complex build process. If you do, you have to keep the generated files updated if you change the content of your structs. + +That said, ffjson operates deterministically, so it will generate the same code every time it run, so unless your code changes, the generated content should not change. Note however that this is only true if you are using the same ffjson version, so if you have several people working on a project, you might need to synchronize your ffjson version. + +## Performance pitfalls + +`ffjson` has a few cases where it will fall back to using the runtime encoder/decoder. Notable cases are: + +* Interface struct members. Since it isn't possible to know the type of these types before runtime, ffjson has to use the reflect based coder. +* Structs with custom marshal/unmarshal. +* Map with a complex value. Simple types like `map[string]int` is fine though. +* Inline struct definitions `type A struct{B struct{ X int} }` are handled by the encoder, but currently has fallback in the decoder. +* Slices of slices / slices of maps are currently falling back when generating the decoder. + +## Reducing Garbage Collection + +`ffjson` already does a lot to help garbage generation. However whenever you go through the json.Marshal you get a new byte slice back. On very high throughput servers this can lead to increased GC pressure. + +### Tip 1: Use ffjson.Marshal() / ffjson.Unmarshal() + +This is probably the easiest optimization for you. Instead of going through encoding/json, you can call ffjson. This will disable the checks that encoding/json does to the json when it receives it from struct functions. + +```Go + import "github.com/pquerna/ffjson/ffjson" + + // BEFORE: + buf, err := json.Marshal(&item) + + // AFTER: + buf, err := ffjson.Marshal(&item) +``` +This simple change is likely to double the speed of your encoding/decoding. + + +[![GoDoc][1]][2] +[1]: https://godoc.org/github.com/pquerna/ffjson/ffjson?status.svg +[2]: https://godoc.org/github.com/pquerna/ffjson/ffjson#Marshal + +### Tip 2: Pooling the buffer + +On servers where you have a lot of concurrent encoding going on, you can hand back the byte buffer you get from json.Marshal once you are done using it. An example could look like this: +```Go +import "github.com/pquerna/ffjson/ffjson" + +func Encode(item interface{}, out io.Writer) { + // Encode + buf, err := ffjson.Marshal(&item) + + // Write the buffer + _,_ = out.Write(buf) + + // We are now no longer need the buffer so we pool it. + ffjson.Pool(buf) +} +``` +Note that the buffers you put back in the pool can still be reclaimed by the garbage collector, so you wont risk your program building up a big memory use by pooling the buffers. + +[![GoDoc][1]][2] +[1]: https://godoc.org/github.com/pquerna/ffjson/ffjson?status.svg +[2]: https://godoc.org/github.com/pquerna/ffjson/ffjson#Pool + +### Tip 3: Creating an Encoder + +There might be cases where you need to encode many objects at once. This could be a server backing up, writing a lot of entries to files, etc. + +To do this, there is an interface similar to `encoding/json`, that allow you to create a re-usable encoder. Here is an example where we want to encode an array of the `Item` type, with a comma between entries: +```Go +import "github.com/pquerna/ffjson/ffjson" + +func EncodeItems(items []Item, out io.Writer) { + // We create an encoder. + enc := ffjson.NewEncoder(out) + + for i, item := range items { + // Encode into the buffer + err := enc.Encode(&item) + + // If err is nil, the content is written to out, so we can write to it as well. + if i != len(items) -1 { + _,_ = out.Write([]byte{','}) + } + } +} +``` + + +Documentation: [![GoDoc][1]][2] +[1]: https://godoc.org/github.com/pquerna/ffjson/ffjson?status.svg +[2]: https://godoc.org/github.com/pquerna/ffjson/ffjson#Encoder + +## Tip 4: Avoid interfaces + +We don't want to dictate how you structure your data, but having interfaces in your code will make ffjson use the golang encoder for these. When ffjson has to do this, it may even become slower than using `json.Marshal` directly. + +To see where that happens, search the generated `_ffjson.go` file for the text `Falling back`, which will indicate where ffjson is unable to generate code for your data structure. + +## Tip 5: `ffjson` all the things! + +You should not only create ffjson code for your main struct, but also any structs that is included/used in your json code. + +So if your struct looks like this: +```Go +type Foo struct { + V Bar +} +``` +You should also make sure that code is generated for `Bar` if it is placed in another file. Also note that currently it requires you to do this in order, since generating code for `Foo` will check if code for `Bar` exists. This is only an issue if `Foo` and `Bar` are placed in different files. We are currently working on allowing simultaneous generation of an entire package. + + +## Improvements, bugs, adding features, and taking ffjson new directions! + +Please [open issues in Github](https://github.com/pquerna/ffjson/issues) for ideas, bugs, and general thoughts. Pull requests are of course preferred :) + +## Similar projects + +* [go-codec](https://github.com/ugorji/go/tree/master/codec#readme). Very good project, that also allows streaming en/decoding, but requires you to call the library to use. +* [megajson](https://github.com/benbjohnson/megajson). This has limited support, and development seems to have almost stopped at the time of writing. + +# Credits + +`ffjson` has recieved significant contributions from: + +* [Klaus Post](https://github.com/klauspost) +* [Paul Querna](https://github.com/pquerna) +* [Erik Dubbelboer](https://github.com/erikdubbelboer) + +## License + +`ffjson` is licensed under the [Apache License, Version 2.0](./LICENSE) + diff --git a/vendor/github.com/pquerna/ffjson/fflib/v1/buffer.go b/vendor/github.com/pquerna/ffjson/fflib/v1/buffer.go new file mode 100644 index 000000000..7f63a8582 --- /dev/null +++ b/vendor/github.com/pquerna/ffjson/fflib/v1/buffer.go @@ -0,0 +1,421 @@ +// Copyright 2009 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +package v1 + +// Simple byte buffer for marshaling data. + +import ( + "bytes" + "encoding/json" + "errors" + "io" + "unicode/utf8" +) + +type grower interface { + Grow(n int) +} + +type truncater interface { + Truncate(n int) + Reset() +} + +type bytesReader interface { + Bytes() []byte + String() string +} + +type runeWriter interface { + WriteRune(r rune) (n int, err error) +} + +type stringWriter interface { + WriteString(s string) (n int, err error) +} + +type lener interface { + Len() int +} + +type rewinder interface { + Rewind(n int) (err error) +} + +type encoder interface { + Encode(interface{}) error +} + +// TODO(pquerna): continue to reduce these interfaces + +type EncodingBuffer interface { + io.Writer + io.WriterTo + io.ByteWriter + stringWriter + truncater + grower + rewinder + encoder +} + +type DecodingBuffer interface { + io.ReadWriter + io.ByteWriter + stringWriter + runeWriter + truncater + grower + bytesReader + lener +} + +// A Buffer is a variable-sized buffer of bytes with Read and Write methods. +// The zero value for Buffer is an empty buffer ready to use. +type Buffer struct { + buf []byte // contents are the bytes buf[off : len(buf)] + off int // read at &buf[off], write at &buf[len(buf)] + runeBytes [utf8.UTFMax]byte // avoid allocation of slice on each WriteByte or Rune + encoder *json.Encoder + skipTrailingByte bool +} + +// ErrTooLarge is passed to panic if memory cannot be allocated to store data in a buffer. +var ErrTooLarge = errors.New("fflib.v1.Buffer: too large") + +// Bytes returns a slice of the contents of the unread portion of the buffer; +// len(b.Bytes()) == b.Len(). If the caller changes the contents of the +// returned slice, the contents of the buffer will change provided there +// are no intervening method calls on the Buffer. +func (b *Buffer) Bytes() []byte { return b.buf[b.off:] } + +// String returns the contents of the unread portion of the buffer +// as a string. If the Buffer is a nil pointer, it returns "". +func (b *Buffer) String() string { + if b == nil { + // Special case, useful in debugging. + return "" + } + return string(b.buf[b.off:]) +} + +// Len returns the number of bytes of the unread portion of the buffer; +// b.Len() == len(b.Bytes()). +func (b *Buffer) Len() int { return len(b.buf) - b.off } + +// Truncate discards all but the first n unread bytes from the buffer. +// It panics if n is negative or greater than the length of the buffer. +func (b *Buffer) Truncate(n int) { + if n == 0 { + b.off = 0 + b.buf = b.buf[0:0] + } else { + b.buf = b.buf[0 : b.off+n] + } +} + +// Reset resets the buffer so it has no content. +// b.Reset() is the same as b.Truncate(0). +func (b *Buffer) Reset() { b.Truncate(0) } + +// grow grows the buffer to guarantee space for n more bytes. +// It returns the index where bytes should be written. +// If the buffer can't grow it will panic with ErrTooLarge. +func (b *Buffer) grow(n int) int { + // If we have no buffer, get one from the pool + m := b.Len() + if m == 0 { + if b.buf == nil { + b.buf = makeSlice(2 * n) + b.off = 0 + } else if b.off != 0 { + // If buffer is empty, reset to recover space. + b.Truncate(0) + } + } + if len(b.buf)+n > cap(b.buf) { + var buf []byte + if m+n <= cap(b.buf)/2 { + // We can slide things down instead of allocating a new + // slice. We only need m+n <= cap(b.buf) to slide, but + // we instead let capacity get twice as large so we + // don't spend all our time copying. + copy(b.buf[:], b.buf[b.off:]) + buf = b.buf[:m] + } else { + // not enough space anywhere + buf = makeSlice(2*cap(b.buf) + n) + copy(buf, b.buf[b.off:]) + Pool(b.buf) + b.buf = buf + } + b.off = 0 + } + b.buf = b.buf[0 : b.off+m+n] + return b.off + m +} + +// Grow grows the buffer's capacity, if necessary, to guarantee space for +// another n bytes. After Grow(n), at least n bytes can be written to the +// buffer without another allocation. +// If n is negative, Grow will panic. +// If the buffer can't grow it will panic with ErrTooLarge. +func (b *Buffer) Grow(n int) { + if n < 0 { + panic("bytes.Buffer.Grow: negative count") + } + m := b.grow(n) + b.buf = b.buf[0:m] +} + +// Write appends the contents of p to the buffer, growing the buffer as +// needed. The return value n is the length of p; err is always nil. If the +// buffer becomes too large, Write will panic with ErrTooLarge. +func (b *Buffer) Write(p []byte) (n int, err error) { + if b.skipTrailingByte { + p = p[:len(p)-1] + } + m := b.grow(len(p)) + return copy(b.buf[m:], p), nil +} + +// WriteString appends the contents of s to the buffer, growing the buffer as +// needed. The return value n is the length of s; err is always nil. If the +// buffer becomes too large, WriteString will panic with ErrTooLarge. +func (b *Buffer) WriteString(s string) (n int, err error) { + m := b.grow(len(s)) + return copy(b.buf[m:], s), nil +} + +// MinRead is the minimum slice size passed to a Read call by +// Buffer.ReadFrom. As long as the Buffer has at least MinRead bytes beyond +// what is required to hold the contents of r, ReadFrom will not grow the +// underlying buffer. +const minRead = 512 + +// ReadFrom reads data from r until EOF and appends it to the buffer, growing +// the buffer as needed. The return value n is the number of bytes read. Any +// error except io.EOF encountered during the read is also returned. If the +// buffer becomes too large, ReadFrom will panic with ErrTooLarge. +func (b *Buffer) ReadFrom(r io.Reader) (n int64, err error) { + // If buffer is empty, reset to recover space. + if b.off >= len(b.buf) { + b.Truncate(0) + } + for { + if free := cap(b.buf) - len(b.buf); free < minRead { + // not enough space at end + newBuf := b.buf + if b.off+free < minRead { + // not enough space using beginning of buffer; + // double buffer capacity + newBuf = makeSlice(2*cap(b.buf) + minRead) + } + copy(newBuf, b.buf[b.off:]) + Pool(b.buf) + b.buf = newBuf[:len(b.buf)-b.off] + b.off = 0 + } + m, e := r.Read(b.buf[len(b.buf):cap(b.buf)]) + b.buf = b.buf[0 : len(b.buf)+m] + n += int64(m) + if e == io.EOF { + break + } + if e != nil { + return n, e + } + } + return n, nil // err is EOF, so return nil explicitly +} + +// WriteTo writes data to w until the buffer is drained or an error occurs. +// The return value n is the number of bytes written; it always fits into an +// int, but it is int64 to match the io.WriterTo interface. Any error +// encountered during the write is also returned. +func (b *Buffer) WriteTo(w io.Writer) (n int64, err error) { + if b.off < len(b.buf) { + nBytes := b.Len() + m, e := w.Write(b.buf[b.off:]) + if m > nBytes { + panic("bytes.Buffer.WriteTo: invalid Write count") + } + b.off += m + n = int64(m) + if e != nil { + return n, e + } + // all bytes should have been written, by definition of + // Write method in io.Writer + if m != nBytes { + return n, io.ErrShortWrite + } + } + // Buffer is now empty; reset. + b.Truncate(0) + return +} + +// WriteByte appends the byte c to the buffer, growing the buffer as needed. +// The returned error is always nil, but is included to match bufio.Writer's +// WriteByte. If the buffer becomes too large, WriteByte will panic with +// ErrTooLarge. +func (b *Buffer) WriteByte(c byte) error { + m := b.grow(1) + b.buf[m] = c + return nil +} + +func (b *Buffer) Rewind(n int) error { + b.buf = b.buf[:len(b.buf)-n] + return nil +} + +func (b *Buffer) Encode(v interface{}) error { + if b.encoder == nil { + b.encoder = json.NewEncoder(b) + } + b.skipTrailingByte = true + err := b.encoder.Encode(v) + b.skipTrailingByte = false + return err +} + +// WriteRune appends the UTF-8 encoding of Unicode code point r to the +// buffer, returning its length and an error, which is always nil but is +// included to match bufio.Writer's WriteRune. The buffer is grown as needed; +// if it becomes too large, WriteRune will panic with ErrTooLarge. +func (b *Buffer) WriteRune(r rune) (n int, err error) { + if r < utf8.RuneSelf { + b.WriteByte(byte(r)) + return 1, nil + } + n = utf8.EncodeRune(b.runeBytes[0:], r) + b.Write(b.runeBytes[0:n]) + return n, nil +} + +// Read reads the next len(p) bytes from the buffer or until the buffer +// is drained. The return value n is the number of bytes read. If the +// buffer has no data to return, err is io.EOF (unless len(p) is zero); +// otherwise it is nil. +func (b *Buffer) Read(p []byte) (n int, err error) { + if b.off >= len(b.buf) { + // Buffer is empty, reset to recover space. + b.Truncate(0) + if len(p) == 0 { + return + } + return 0, io.EOF + } + n = copy(p, b.buf[b.off:]) + b.off += n + return +} + +// Next returns a slice containing the next n bytes from the buffer, +// advancing the buffer as if the bytes had been returned by Read. +// If there are fewer than n bytes in the buffer, Next returns the entire buffer. +// The slice is only valid until the next call to a read or write method. +func (b *Buffer) Next(n int) []byte { + m := b.Len() + if n > m { + n = m + } + data := b.buf[b.off : b.off+n] + b.off += n + return data +} + +// ReadByte reads and returns the next byte from the buffer. +// If no byte is available, it returns error io.EOF. +func (b *Buffer) ReadByte() (c byte, err error) { + if b.off >= len(b.buf) { + // Buffer is empty, reset to recover space. + b.Truncate(0) + return 0, io.EOF + } + c = b.buf[b.off] + b.off++ + return c, nil +} + +// ReadRune reads and returns the next UTF-8-encoded +// Unicode code point from the buffer. +// If no bytes are available, the error returned is io.EOF. +// If the bytes are an erroneous UTF-8 encoding, it +// consumes one byte and returns U+FFFD, 1. +func (b *Buffer) ReadRune() (r rune, size int, err error) { + if b.off >= len(b.buf) { + // Buffer is empty, reset to recover space. + b.Truncate(0) + return 0, 0, io.EOF + } + c := b.buf[b.off] + if c < utf8.RuneSelf { + b.off++ + return rune(c), 1, nil + } + r, n := utf8.DecodeRune(b.buf[b.off:]) + b.off += n + return r, n, nil +} + +// ReadBytes reads until the first occurrence of delim in the input, +// returning a slice containing the data up to and including the delimiter. +// If ReadBytes encounters an error before finding a delimiter, +// it returns the data read before the error and the error itself (often io.EOF). +// ReadBytes returns err != nil if and only if the returned data does not end in +// delim. +func (b *Buffer) ReadBytes(delim byte) (line []byte, err error) { + slice, err := b.readSlice(delim) + // return a copy of slice. The buffer's backing array may + // be overwritten by later calls. + line = append(line, slice...) + return +} + +// readSlice is like ReadBytes but returns a reference to internal buffer data. +func (b *Buffer) readSlice(delim byte) (line []byte, err error) { + i := bytes.IndexByte(b.buf[b.off:], delim) + end := b.off + i + 1 + if i < 0 { + end = len(b.buf) + err = io.EOF + } + line = b.buf[b.off:end] + b.off = end + return line, err +} + +// ReadString reads until the first occurrence of delim in the input, +// returning a string containing the data up to and including the delimiter. +// If ReadString encounters an error before finding a delimiter, +// it returns the data read before the error and the error itself (often io.EOF). +// ReadString returns err != nil if and only if the returned data does not end +// in delim. +func (b *Buffer) ReadString(delim byte) (line string, err error) { + slice, err := b.readSlice(delim) + return string(slice), err +} + +// NewBuffer creates and initializes a new Buffer using buf as its initial +// contents. It is intended to prepare a Buffer to read existing data. It +// can also be used to size the internal buffer for writing. To do that, +// buf should have the desired capacity but a length of zero. +// +// In most cases, new(Buffer) (or just declaring a Buffer variable) is +// sufficient to initialize a Buffer. +func NewBuffer(buf []byte) *Buffer { return &Buffer{buf: buf} } + +// NewBufferString creates and initializes a new Buffer using string s as its +// initial contents. It is intended to prepare a buffer to read an existing +// string. +// +// In most cases, new(Buffer) (or just declaring a Buffer variable) is +// sufficient to initialize a Buffer. +func NewBufferString(s string) *Buffer { + return &Buffer{buf: []byte(s)} +} diff --git a/vendor/github.com/pquerna/ffjson/fflib/v1/buffer_nopool.go b/vendor/github.com/pquerna/ffjson/fflib/v1/buffer_nopool.go new file mode 100644 index 000000000..b84af6ff9 --- /dev/null +++ b/vendor/github.com/pquerna/ffjson/fflib/v1/buffer_nopool.go @@ -0,0 +1,11 @@ +// +build !go1.3 + +package v1 + +// Stub version of buffer_pool.go for Go 1.2, which doesn't have sync.Pool. + +func Pool(b []byte) {} + +func makeSlice(n int) []byte { + return make([]byte, n) +} diff --git a/vendor/github.com/pquerna/ffjson/fflib/v1/buffer_pool.go b/vendor/github.com/pquerna/ffjson/fflib/v1/buffer_pool.go new file mode 100644 index 000000000..a021c57cf --- /dev/null +++ b/vendor/github.com/pquerna/ffjson/fflib/v1/buffer_pool.go @@ -0,0 +1,105 @@ +// Copyright 2009 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// +build go1.3 + +package v1 + +// Allocation pools for Buffers. + +import "sync" + +var pools [14]sync.Pool +var pool64 *sync.Pool + +func init() { + var i uint + // TODO(pquerna): add science here around actual pool sizes. + for i = 6; i < 20; i++ { + n := 1 << i + pools[poolNum(n)].New = func() interface{} { return make([]byte, 0, n) } + } + pool64 = &pools[0] +} + +// This returns the pool number that will give a buffer of +// at least 'i' bytes. +func poolNum(i int) int { + // TODO(pquerna): convert to log2 w/ bsr asm instruction: + // + if i <= 64 { + return 0 + } else if i <= 128 { + return 1 + } else if i <= 256 { + return 2 + } else if i <= 512 { + return 3 + } else if i <= 1024 { + return 4 + } else if i <= 2048 { + return 5 + } else if i <= 4096 { + return 6 + } else if i <= 8192 { + return 7 + } else if i <= 16384 { + return 8 + } else if i <= 32768 { + return 9 + } else if i <= 65536 { + return 10 + } else if i <= 131072 { + return 11 + } else if i <= 262144 { + return 12 + } else if i <= 524288 { + return 13 + } else { + return -1 + } +} + +// Send a buffer to the Pool to reuse for other instances. +// You may no longer utilize the content of the buffer, since it may be used +// by other goroutines. +func Pool(b []byte) { + if b == nil { + return + } + c := cap(b) + + // Our smallest buffer is 64 bytes, so we discard smaller buffers. + if c < 64 { + return + } + + // We need to put the incoming buffer into the NEXT buffer, + // since a buffer guarantees AT LEAST the number of bytes available + // that is the top of this buffer. + // That is the reason for dividing the cap by 2, so it gets into the NEXT bucket. + // We add 2 to avoid rounding down if size is exactly power of 2. + pn := poolNum((c + 2) >> 1) + if pn != -1 { + pools[pn].Put(b[0:0]) + } + // if we didn't have a slot for this []byte, we just drop it and let the GC + // take care of it. +} + +// makeSlice allocates a slice of size n -- it will attempt to use a pool'ed +// instance whenever possible. +func makeSlice(n int) []byte { + if n <= 64 { + return pool64.Get().([]byte)[0:n] + } + + pn := poolNum(n) + + if pn != -1 { + return pools[pn].Get().([]byte)[0:n] + } else { + return make([]byte, n) + } +} diff --git a/vendor/github.com/pquerna/ffjson/fflib/v1/bytenum.go b/vendor/github.com/pquerna/ffjson/fflib/v1/bytenum.go new file mode 100644 index 000000000..08477409a --- /dev/null +++ b/vendor/github.com/pquerna/ffjson/fflib/v1/bytenum.go @@ -0,0 +1,88 @@ +/** + * Copyright 2014 Paul Querna + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + */ + +/* Portions of this file are on Go stdlib's strconv/iota.go */ +// Copyright 2009 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +package v1 + +import ( + "github.com/pquerna/ffjson/fflib/v1/internal" +) + +func ParseFloat(s []byte, bitSize int) (f float64, err error) { + return internal.ParseFloat(s, bitSize) +} + +// ParseUint is like ParseInt but for unsigned numbers, and oeprating on []byte +func ParseUint(s []byte, base int, bitSize int) (n uint64, err error) { + if len(s) == 1 { + switch s[0] { + case '0': + return 0, nil + case '1': + return 1, nil + case '2': + return 2, nil + case '3': + return 3, nil + case '4': + return 4, nil + case '5': + return 5, nil + case '6': + return 6, nil + case '7': + return 7, nil + case '8': + return 8, nil + case '9': + return 9, nil + } + } + return internal.ParseUint(s, base, bitSize) +} + +func ParseInt(s []byte, base int, bitSize int) (i int64, err error) { + if len(s) == 1 { + switch s[0] { + case '0': + return 0, nil + case '1': + return 1, nil + case '2': + return 2, nil + case '3': + return 3, nil + case '4': + return 4, nil + case '5': + return 5, nil + case '6': + return 6, nil + case '7': + return 7, nil + case '8': + return 8, nil + case '9': + return 9, nil + } + } + return internal.ParseInt(s, base, bitSize) +} diff --git a/vendor/github.com/pquerna/ffjson/fflib/v1/decimal.go b/vendor/github.com/pquerna/ffjson/fflib/v1/decimal.go new file mode 100644 index 000000000..069df7a02 --- /dev/null +++ b/vendor/github.com/pquerna/ffjson/fflib/v1/decimal.go @@ -0,0 +1,378 @@ +// Copyright 2009 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// Multiprecision decimal numbers. +// For floating-point formatting only; not general purpose. +// Only operations are assign and (binary) left/right shift. +// Can do binary floating point in multiprecision decimal precisely +// because 2 divides 10; cannot do decimal floating point +// in multiprecision binary precisely. + +package v1 + +type decimal struct { + d [800]byte // digits + nd int // number of digits used + dp int // decimal point + neg bool + trunc bool // discarded nonzero digits beyond d[:nd] +} + +func (a *decimal) String() string { + n := 10 + a.nd + if a.dp > 0 { + n += a.dp + } + if a.dp < 0 { + n += -a.dp + } + + buf := make([]byte, n) + w := 0 + switch { + case a.nd == 0: + return "0" + + case a.dp <= 0: + // zeros fill space between decimal point and digits + buf[w] = '0' + w++ + buf[w] = '.' + w++ + w += digitZero(buf[w : w+-a.dp]) + w += copy(buf[w:], a.d[0:a.nd]) + + case a.dp < a.nd: + // decimal point in middle of digits + w += copy(buf[w:], a.d[0:a.dp]) + buf[w] = '.' + w++ + w += copy(buf[w:], a.d[a.dp:a.nd]) + + default: + // zeros fill space between digits and decimal point + w += copy(buf[w:], a.d[0:a.nd]) + w += digitZero(buf[w : w+a.dp-a.nd]) + } + return string(buf[0:w]) +} + +func digitZero(dst []byte) int { + for i := range dst { + dst[i] = '0' + } + return len(dst) +} + +// trim trailing zeros from number. +// (They are meaningless; the decimal point is tracked +// independent of the number of digits.) +func trim(a *decimal) { + for a.nd > 0 && a.d[a.nd-1] == '0' { + a.nd-- + } + if a.nd == 0 { + a.dp = 0 + } +} + +// Assign v to a. +func (a *decimal) Assign(v uint64) { + var buf [24]byte + + // Write reversed decimal in buf. + n := 0 + for v > 0 { + v1 := v / 10 + v -= 10 * v1 + buf[n] = byte(v + '0') + n++ + v = v1 + } + + // Reverse again to produce forward decimal in a.d. + a.nd = 0 + for n--; n >= 0; n-- { + a.d[a.nd] = buf[n] + a.nd++ + } + a.dp = a.nd + trim(a) +} + +// Maximum shift that we can do in one pass without overflow. +// Signed int has 31 bits, and we have to be able to accommodate 9<>k == 0; r++ { + if r >= a.nd { + if n == 0 { + // a == 0; shouldn't get here, but handle anyway. + a.nd = 0 + return + } + for n>>k == 0 { + n = n * 10 + r++ + } + break + } + c := int(a.d[r]) + n = n*10 + c - '0' + } + a.dp -= r - 1 + + // Pick up a digit, put down a digit. + for ; r < a.nd; r++ { + c := int(a.d[r]) + dig := n >> k + n -= dig << k + a.d[w] = byte(dig + '0') + w++ + n = n*10 + c - '0' + } + + // Put down extra digits. + for n > 0 { + dig := n >> k + n -= dig << k + if w < len(a.d) { + a.d[w] = byte(dig + '0') + w++ + } else if dig > 0 { + a.trunc = true + } + n = n * 10 + } + + a.nd = w + trim(a) +} + +// Cheat sheet for left shift: table indexed by shift count giving +// number of new digits that will be introduced by that shift. +// +// For example, leftcheats[4] = {2, "625"}. That means that +// if we are shifting by 4 (multiplying by 16), it will add 2 digits +// when the string prefix is "625" through "999", and one fewer digit +// if the string prefix is "000" through "624". +// +// Credit for this trick goes to Ken. + +type leftCheat struct { + delta int // number of new digits + cutoff string // minus one digit if original < a. +} + +var leftcheats = []leftCheat{ + // Leading digits of 1/2^i = 5^i. + // 5^23 is not an exact 64-bit floating point number, + // so have to use bc for the math. + /* + seq 27 | sed 's/^/5^/' | bc | + awk 'BEGIN{ print "\tleftCheat{ 0, \"\" }," } + { + log2 = log(2)/log(10) + printf("\tleftCheat{ %d, \"%s\" },\t// * %d\n", + int(log2*NR+1), $0, 2**NR) + }' + */ + {0, ""}, + {1, "5"}, // * 2 + {1, "25"}, // * 4 + {1, "125"}, // * 8 + {2, "625"}, // * 16 + {2, "3125"}, // * 32 + {2, "15625"}, // * 64 + {3, "78125"}, // * 128 + {3, "390625"}, // * 256 + {3, "1953125"}, // * 512 + {4, "9765625"}, // * 1024 + {4, "48828125"}, // * 2048 + {4, "244140625"}, // * 4096 + {4, "1220703125"}, // * 8192 + {5, "6103515625"}, // * 16384 + {5, "30517578125"}, // * 32768 + {5, "152587890625"}, // * 65536 + {6, "762939453125"}, // * 131072 + {6, "3814697265625"}, // * 262144 + {6, "19073486328125"}, // * 524288 + {7, "95367431640625"}, // * 1048576 + {7, "476837158203125"}, // * 2097152 + {7, "2384185791015625"}, // * 4194304 + {7, "11920928955078125"}, // * 8388608 + {8, "59604644775390625"}, // * 16777216 + {8, "298023223876953125"}, // * 33554432 + {8, "1490116119384765625"}, // * 67108864 + {9, "7450580596923828125"}, // * 134217728 +} + +// Is the leading prefix of b lexicographically less than s? +func prefixIsLessThan(b []byte, s string) bool { + for i := 0; i < len(s); i++ { + if i >= len(b) { + return true + } + if b[i] != s[i] { + return b[i] < s[i] + } + } + return false +} + +// Binary shift left (/ 2) by k bits. k <= maxShift to avoid overflow. +func leftShift(a *decimal, k uint) { + delta := leftcheats[k].delta + if prefixIsLessThan(a.d[0:a.nd], leftcheats[k].cutoff) { + delta-- + } + + r := a.nd // read index + w := a.nd + delta // write index + n := 0 + + // Pick up a digit, put down a digit. + for r--; r >= 0; r-- { + n += (int(a.d[r]) - '0') << k + quo := n / 10 + rem := n - 10*quo + w-- + if w < len(a.d) { + a.d[w] = byte(rem + '0') + } else if rem != 0 { + a.trunc = true + } + n = quo + } + + // Put down extra digits. + for n > 0 { + quo := n / 10 + rem := n - 10*quo + w-- + if w < len(a.d) { + a.d[w] = byte(rem + '0') + } else if rem != 0 { + a.trunc = true + } + n = quo + } + + a.nd += delta + if a.nd >= len(a.d) { + a.nd = len(a.d) + } + a.dp += delta + trim(a) +} + +// Binary shift left (k > 0) or right (k < 0). +func (a *decimal) Shift(k int) { + switch { + case a.nd == 0: + // nothing to do: a == 0 + case k > 0: + for k > maxShift { + leftShift(a, maxShift) + k -= maxShift + } + leftShift(a, uint(k)) + case k < 0: + for k < -maxShift { + rightShift(a, maxShift) + k += maxShift + } + rightShift(a, uint(-k)) + } +} + +// If we chop a at nd digits, should we round up? +func shouldRoundUp(a *decimal, nd int) bool { + if nd < 0 || nd >= a.nd { + return false + } + if a.d[nd] == '5' && nd+1 == a.nd { // exactly halfway - round to even + // if we truncated, a little higher than what's recorded - always round up + if a.trunc { + return true + } + return nd > 0 && (a.d[nd-1]-'0')%2 != 0 + } + // not halfway - digit tells all + return a.d[nd] >= '5' +} + +// Round a to nd digits (or fewer). +// If nd is zero, it means we're rounding +// just to the left of the digits, as in +// 0.09 -> 0.1. +func (a *decimal) Round(nd int) { + if nd < 0 || nd >= a.nd { + return + } + if shouldRoundUp(a, nd) { + a.RoundUp(nd) + } else { + a.RoundDown(nd) + } +} + +// Round a down to nd digits (or fewer). +func (a *decimal) RoundDown(nd int) { + if nd < 0 || nd >= a.nd { + return + } + a.nd = nd + trim(a) +} + +// Round a up to nd digits (or fewer). +func (a *decimal) RoundUp(nd int) { + if nd < 0 || nd >= a.nd { + return + } + + // round up + for i := nd - 1; i >= 0; i-- { + c := a.d[i] + if c < '9' { // can stop after this digit + a.d[i]++ + a.nd = i + 1 + return + } + } + + // Number is all 9s. + // Change to single 1 with adjusted decimal point. + a.d[0] = '1' + a.nd = 1 + a.dp++ +} + +// Extract integer part, rounded appropriately. +// No guarantees about overflow. +func (a *decimal) RoundedInteger() uint64 { + if a.dp > 20 { + return 0xFFFFFFFFFFFFFFFF + } + var i int + n := uint64(0) + for i = 0; i < a.dp && i < a.nd; i++ { + n = n*10 + uint64(a.d[i]-'0') + } + for ; i < a.dp; i++ { + n *= 10 + } + if shouldRoundUp(a, a.dp) { + n++ + } + return n +} diff --git a/vendor/github.com/pquerna/ffjson/fflib/v1/extfloat.go b/vendor/github.com/pquerna/ffjson/fflib/v1/extfloat.go new file mode 100644 index 000000000..508ddc6be --- /dev/null +++ b/vendor/github.com/pquerna/ffjson/fflib/v1/extfloat.go @@ -0,0 +1,668 @@ +// Copyright 2011 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +package v1 + +// An extFloat represents an extended floating-point number, with more +// precision than a float64. It does not try to save bits: the +// number represented by the structure is mant*(2^exp), with a negative +// sign if neg is true. +type extFloat struct { + mant uint64 + exp int + neg bool +} + +// Powers of ten taken from double-conversion library. +// http://code.google.com/p/double-conversion/ +const ( + firstPowerOfTen = -348 + stepPowerOfTen = 8 +) + +var smallPowersOfTen = [...]extFloat{ + {1 << 63, -63, false}, // 1 + {0xa << 60, -60, false}, // 1e1 + {0x64 << 57, -57, false}, // 1e2 + {0x3e8 << 54, -54, false}, // 1e3 + {0x2710 << 50, -50, false}, // 1e4 + {0x186a0 << 47, -47, false}, // 1e5 + {0xf4240 << 44, -44, false}, // 1e6 + {0x989680 << 40, -40, false}, // 1e7 +} + +var powersOfTen = [...]extFloat{ + {0xfa8fd5a0081c0288, -1220, false}, // 10^-348 + {0xbaaee17fa23ebf76, -1193, false}, // 10^-340 + {0x8b16fb203055ac76, -1166, false}, // 10^-332 + {0xcf42894a5dce35ea, -1140, false}, // 10^-324 + {0x9a6bb0aa55653b2d, -1113, false}, // 10^-316 + {0xe61acf033d1a45df, -1087, false}, // 10^-308 + {0xab70fe17c79ac6ca, -1060, false}, // 10^-300 + {0xff77b1fcbebcdc4f, -1034, false}, // 10^-292 + {0xbe5691ef416bd60c, -1007, false}, // 10^-284 + {0x8dd01fad907ffc3c, -980, false}, // 10^-276 + {0xd3515c2831559a83, -954, false}, // 10^-268 + {0x9d71ac8fada6c9b5, -927, false}, // 10^-260 + {0xea9c227723ee8bcb, -901, false}, // 10^-252 + {0xaecc49914078536d, -874, false}, // 10^-244 + {0x823c12795db6ce57, -847, false}, // 10^-236 + {0xc21094364dfb5637, -821, false}, // 10^-228 + {0x9096ea6f3848984f, -794, false}, // 10^-220 + {0xd77485cb25823ac7, -768, false}, // 10^-212 + {0xa086cfcd97bf97f4, -741, false}, // 10^-204 + {0xef340a98172aace5, -715, false}, // 10^-196 + {0xb23867fb2a35b28e, -688, false}, // 10^-188 + {0x84c8d4dfd2c63f3b, -661, false}, // 10^-180 + {0xc5dd44271ad3cdba, -635, false}, // 10^-172 + {0x936b9fcebb25c996, -608, false}, // 10^-164 + {0xdbac6c247d62a584, -582, false}, // 10^-156 + {0xa3ab66580d5fdaf6, -555, false}, // 10^-148 + {0xf3e2f893dec3f126, -529, false}, // 10^-140 + {0xb5b5ada8aaff80b8, -502, false}, // 10^-132 + {0x87625f056c7c4a8b, -475, false}, // 10^-124 + {0xc9bcff6034c13053, -449, false}, // 10^-116 + {0x964e858c91ba2655, -422, false}, // 10^-108 + {0xdff9772470297ebd, -396, false}, // 10^-100 + {0xa6dfbd9fb8e5b88f, -369, false}, // 10^-92 + {0xf8a95fcf88747d94, -343, false}, // 10^-84 + {0xb94470938fa89bcf, -316, false}, // 10^-76 + {0x8a08f0f8bf0f156b, -289, false}, // 10^-68 + {0xcdb02555653131b6, -263, false}, // 10^-60 + {0x993fe2c6d07b7fac, -236, false}, // 10^-52 + {0xe45c10c42a2b3b06, -210, false}, // 10^-44 + {0xaa242499697392d3, -183, false}, // 10^-36 + {0xfd87b5f28300ca0e, -157, false}, // 10^-28 + {0xbce5086492111aeb, -130, false}, // 10^-20 + {0x8cbccc096f5088cc, -103, false}, // 10^-12 + {0xd1b71758e219652c, -77, false}, // 10^-4 + {0x9c40000000000000, -50, false}, // 10^4 + {0xe8d4a51000000000, -24, false}, // 10^12 + {0xad78ebc5ac620000, 3, false}, // 10^20 + {0x813f3978f8940984, 30, false}, // 10^28 + {0xc097ce7bc90715b3, 56, false}, // 10^36 + {0x8f7e32ce7bea5c70, 83, false}, // 10^44 + {0xd5d238a4abe98068, 109, false}, // 10^52 + {0x9f4f2726179a2245, 136, false}, // 10^60 + {0xed63a231d4c4fb27, 162, false}, // 10^68 + {0xb0de65388cc8ada8, 189, false}, // 10^76 + {0x83c7088e1aab65db, 216, false}, // 10^84 + {0xc45d1df942711d9a, 242, false}, // 10^92 + {0x924d692ca61be758, 269, false}, // 10^100 + {0xda01ee641a708dea, 295, false}, // 10^108 + {0xa26da3999aef774a, 322, false}, // 10^116 + {0xf209787bb47d6b85, 348, false}, // 10^124 + {0xb454e4a179dd1877, 375, false}, // 10^132 + {0x865b86925b9bc5c2, 402, false}, // 10^140 + {0xc83553c5c8965d3d, 428, false}, // 10^148 + {0x952ab45cfa97a0b3, 455, false}, // 10^156 + {0xde469fbd99a05fe3, 481, false}, // 10^164 + {0xa59bc234db398c25, 508, false}, // 10^172 + {0xf6c69a72a3989f5c, 534, false}, // 10^180 + {0xb7dcbf5354e9bece, 561, false}, // 10^188 + {0x88fcf317f22241e2, 588, false}, // 10^196 + {0xcc20ce9bd35c78a5, 614, false}, // 10^204 + {0x98165af37b2153df, 641, false}, // 10^212 + {0xe2a0b5dc971f303a, 667, false}, // 10^220 + {0xa8d9d1535ce3b396, 694, false}, // 10^228 + {0xfb9b7cd9a4a7443c, 720, false}, // 10^236 + {0xbb764c4ca7a44410, 747, false}, // 10^244 + {0x8bab8eefb6409c1a, 774, false}, // 10^252 + {0xd01fef10a657842c, 800, false}, // 10^260 + {0x9b10a4e5e9913129, 827, false}, // 10^268 + {0xe7109bfba19c0c9d, 853, false}, // 10^276 + {0xac2820d9623bf429, 880, false}, // 10^284 + {0x80444b5e7aa7cf85, 907, false}, // 10^292 + {0xbf21e44003acdd2d, 933, false}, // 10^300 + {0x8e679c2f5e44ff8f, 960, false}, // 10^308 + {0xd433179d9c8cb841, 986, false}, // 10^316 + {0x9e19db92b4e31ba9, 1013, false}, // 10^324 + {0xeb96bf6ebadf77d9, 1039, false}, // 10^332 + {0xaf87023b9bf0ee6b, 1066, false}, // 10^340 +} + +// floatBits returns the bits of the float64 that best approximates +// the extFloat passed as receiver. Overflow is set to true if +// the resulting float64 is ±Inf. +func (f *extFloat) floatBits(flt *floatInfo) (bits uint64, overflow bool) { + f.Normalize() + + exp := f.exp + 63 + + // Exponent too small. + if exp < flt.bias+1 { + n := flt.bias + 1 - exp + f.mant >>= uint(n) + exp += n + } + + // Extract 1+flt.mantbits bits from the 64-bit mantissa. + mant := f.mant >> (63 - flt.mantbits) + if f.mant&(1<<(62-flt.mantbits)) != 0 { + // Round up. + mant += 1 + } + + // Rounding might have added a bit; shift down. + if mant == 2<>= 1 + exp++ + } + + // Infinities. + if exp-flt.bias >= 1<>uint(-f.exp))<>= uint(-f.exp) + f.exp = 0 + return *f, *f + } + expBiased := exp - flt.bias + + upper = extFloat{mant: 2*f.mant + 1, exp: f.exp - 1, neg: f.neg} + if mant != 1<>(64-32) == 0 { + mant <<= 32 + exp -= 32 + } + if mant>>(64-16) == 0 { + mant <<= 16 + exp -= 16 + } + if mant>>(64-8) == 0 { + mant <<= 8 + exp -= 8 + } + if mant>>(64-4) == 0 { + mant <<= 4 + exp -= 4 + } + if mant>>(64-2) == 0 { + mant <<= 2 + exp -= 2 + } + if mant>>(64-1) == 0 { + mant <<= 1 + exp -= 1 + } + shift = uint(f.exp - exp) + f.mant, f.exp = mant, exp + return +} + +// Multiply sets f to the product f*g: the result is correctly rounded, +// but not normalized. +func (f *extFloat) Multiply(g extFloat) { + fhi, flo := f.mant>>32, uint64(uint32(f.mant)) + ghi, glo := g.mant>>32, uint64(uint32(g.mant)) + + // Cross products. + cross1 := fhi * glo + cross2 := flo * ghi + + // f.mant*g.mant is fhi*ghi << 64 + (cross1+cross2) << 32 + flo*glo + f.mant = fhi*ghi + (cross1 >> 32) + (cross2 >> 32) + rem := uint64(uint32(cross1)) + uint64(uint32(cross2)) + ((flo * glo) >> 32) + // Round up. + rem += (1 << 31) + + f.mant += (rem >> 32) + f.exp = f.exp + g.exp + 64 +} + +var uint64pow10 = [...]uint64{ + 1, 1e1, 1e2, 1e3, 1e4, 1e5, 1e6, 1e7, 1e8, 1e9, + 1e10, 1e11, 1e12, 1e13, 1e14, 1e15, 1e16, 1e17, 1e18, 1e19, +} + +// AssignDecimal sets f to an approximate value mantissa*10^exp. It +// returns true if the value represented by f is guaranteed to be the +// best approximation of d after being rounded to a float64 or +// float32 depending on flt. +func (f *extFloat) AssignDecimal(mantissa uint64, exp10 int, neg bool, trunc bool, flt *floatInfo) (ok bool) { + const uint64digits = 19 + const errorscale = 8 + errors := 0 // An upper bound for error, computed in errorscale*ulp. + if trunc { + // the decimal number was truncated. + errors += errorscale / 2 + } + + f.mant = mantissa + f.exp = 0 + f.neg = neg + + // Multiply by powers of ten. + i := (exp10 - firstPowerOfTen) / stepPowerOfTen + if exp10 < firstPowerOfTen || i >= len(powersOfTen) { + return false + } + adjExp := (exp10 - firstPowerOfTen) % stepPowerOfTen + + // We multiply by exp%step + if adjExp < uint64digits && mantissa < uint64pow10[uint64digits-adjExp] { + // We can multiply the mantissa exactly. + f.mant *= uint64pow10[adjExp] + f.Normalize() + } else { + f.Normalize() + f.Multiply(smallPowersOfTen[adjExp]) + errors += errorscale / 2 + } + + // We multiply by 10 to the exp - exp%step. + f.Multiply(powersOfTen[i]) + if errors > 0 { + errors += 1 + } + errors += errorscale / 2 + + // Normalize + shift := f.Normalize() + errors <<= shift + + // Now f is a good approximation of the decimal. + // Check whether the error is too large: that is, if the mantissa + // is perturbated by the error, the resulting float64 will change. + // The 64 bits mantissa is 1 + 52 bits for float64 + 11 extra bits. + // + // In many cases the approximation will be good enough. + denormalExp := flt.bias - 63 + var extrabits uint + if f.exp <= denormalExp { + // f.mant * 2^f.exp is smaller than 2^(flt.bias+1). + extrabits = uint(63 - flt.mantbits + 1 + uint(denormalExp-f.exp)) + } else { + extrabits = uint(63 - flt.mantbits) + } + + halfway := uint64(1) << (extrabits - 1) + mant_extra := f.mant & (1< expMax: + i-- + default: + break Loop + } + } + // Apply the desired decimal shift on f. It will have exponent + // in the desired range. This is multiplication by 10^-exp10. + f.Multiply(powersOfTen[i]) + + return -(firstPowerOfTen + i*stepPowerOfTen), i +} + +// frexp10Many applies a common shift by a power of ten to a, b, c. +func frexp10Many(a, b, c *extFloat) (exp10 int) { + exp10, i := c.frexp10() + a.Multiply(powersOfTen[i]) + b.Multiply(powersOfTen[i]) + return +} + +// FixedDecimal stores in d the first n significant digits +// of the decimal representation of f. It returns false +// if it cannot be sure of the answer. +func (f *extFloat) FixedDecimal(d *decimalSlice, n int) bool { + if f.mant == 0 { + d.nd = 0 + d.dp = 0 + d.neg = f.neg + return true + } + if n == 0 { + panic("strconv: internal error: extFloat.FixedDecimal called with n == 0") + } + // Multiply by an appropriate power of ten to have a reasonable + // number to process. + f.Normalize() + exp10, _ := f.frexp10() + + shift := uint(-f.exp) + integer := uint32(f.mant >> shift) + fraction := f.mant - (uint64(integer) << shift) + ε := uint64(1) // ε is the uncertainty we have on the mantissa of f. + + // Write exactly n digits to d. + needed := n // how many digits are left to write. + integerDigits := 0 // the number of decimal digits of integer. + pow10 := uint64(1) // the power of ten by which f was scaled. + for i, pow := 0, uint64(1); i < 20; i++ { + if pow > uint64(integer) { + integerDigits = i + break + } + pow *= 10 + } + rest := integer + if integerDigits > needed { + // the integral part is already large, trim the last digits. + pow10 = uint64pow10[integerDigits-needed] + integer /= uint32(pow10) + rest -= integer * uint32(pow10) + } else { + rest = 0 + } + + // Write the digits of integer: the digits of rest are omitted. + var buf [32]byte + pos := len(buf) + for v := integer; v > 0; { + v1 := v / 10 + v -= 10 * v1 + pos-- + buf[pos] = byte(v + '0') + v = v1 + } + for i := pos; i < len(buf); i++ { + d.d[i-pos] = buf[i] + } + nd := len(buf) - pos + d.nd = nd + d.dp = integerDigits + exp10 + needed -= nd + + if needed > 0 { + if rest != 0 || pow10 != 1 { + panic("strconv: internal error, rest != 0 but needed > 0") + } + // Emit digits for the fractional part. Each time, 10*fraction + // fits in a uint64 without overflow. + for needed > 0 { + fraction *= 10 + ε *= 10 // the uncertainty scales as we multiply by ten. + if 2*ε > 1<> shift + d.d[nd] = byte(digit + '0') + fraction -= digit << shift + nd++ + needed-- + } + d.nd = nd + } + + // We have written a truncation of f (a numerator / 10^d.dp). The remaining part + // can be interpreted as a small number (< 1) to be added to the last digit of the + // numerator. + // + // If rest > 0, the amount is: + // (rest< 0 guarantees that pow10 << shift does not overflow a uint64. + // + // If rest = 0, pow10 == 1 and the amount is + // fraction / (1 << shift) + // fraction being known with a ±ε uncertainty. + // + // We pass this information to the rounding routine for adjustment. + + ok := adjustLastDigitFixed(d, uint64(rest)<= 0; i-- { + if d.d[i] != '0' { + d.nd = i + 1 + break + } + } + return true +} + +// adjustLastDigitFixed assumes d contains the representation of the integral part +// of some number, whose fractional part is num / (den << shift). The numerator +// num is only known up to an uncertainty of size ε, assumed to be less than +// (den << shift)/2. +// +// It will increase the last digit by one to account for correct rounding, typically +// when the fractional part is greater than 1/2, and will return false if ε is such +// that no correct answer can be given. +func adjustLastDigitFixed(d *decimalSlice, num, den uint64, shift uint, ε uint64) bool { + if num > den< den< den< (den< den<= 0; i-- { + if d.d[i] == '9' { + d.nd-- + } else { + break + } + } + if i < 0 { + d.d[0] = '1' + d.nd = 1 + d.dp++ + } else { + d.d[i]++ + } + return true + } + return false +} + +// ShortestDecimal stores in d the shortest decimal representation of f +// which belongs to the open interval (lower, upper), where f is supposed +// to lie. It returns false whenever the result is unsure. The implementation +// uses the Grisu3 algorithm. +func (f *extFloat) ShortestDecimal(d *decimalSlice, lower, upper *extFloat) bool { + if f.mant == 0 { + d.nd = 0 + d.dp = 0 + d.neg = f.neg + return true + } + if f.exp == 0 && *lower == *f && *lower == *upper { + // an exact integer. + var buf [24]byte + n := len(buf) - 1 + for v := f.mant; v > 0; { + v1 := v / 10 + v -= 10 * v1 + buf[n] = byte(v + '0') + n-- + v = v1 + } + nd := len(buf) - n - 1 + for i := 0; i < nd; i++ { + d.d[i] = buf[n+1+i] + } + d.nd, d.dp = nd, nd + for d.nd > 0 && d.d[d.nd-1] == '0' { + d.nd-- + } + if d.nd == 0 { + d.dp = 0 + } + d.neg = f.neg + return true + } + upper.Normalize() + // Uniformize exponents. + if f.exp > upper.exp { + f.mant <<= uint(f.exp - upper.exp) + f.exp = upper.exp + } + if lower.exp > upper.exp { + lower.mant <<= uint(lower.exp - upper.exp) + lower.exp = upper.exp + } + + exp10 := frexp10Many(lower, f, upper) + // Take a safety margin due to rounding in frexp10Many, but we lose precision. + upper.mant++ + lower.mant-- + + // The shortest representation of f is either rounded up or down, but + // in any case, it is a truncation of upper. + shift := uint(-upper.exp) + integer := uint32(upper.mant >> shift) + fraction := upper.mant - (uint64(integer) << shift) + + // How far we can go down from upper until the result is wrong. + allowance := upper.mant - lower.mant + // How far we should go to get a very precise result. + targetDiff := upper.mant - f.mant + + // Count integral digits: there are at most 10. + var integerDigits int + for i, pow := 0, uint64(1); i < 20; i++ { + if pow > uint64(integer) { + integerDigits = i + break + } + pow *= 10 + } + for i := 0; i < integerDigits; i++ { + pow := uint64pow10[integerDigits-i-1] + digit := integer / uint32(pow) + d.d[i] = byte(digit + '0') + integer -= digit * uint32(pow) + // evaluate whether we should stop. + if currentDiff := uint64(integer)<> shift) + d.d[d.nd] = byte(digit + '0') + d.nd++ + fraction -= uint64(digit) << shift + if fraction < allowance*multiplier { + // We are in the admissible range. Note that if allowance is about to + // overflow, that is, allowance > 2^64/10, the condition is automatically + // true due to the limited range of fraction. + return adjustLastDigit(d, + fraction, targetDiff*multiplier, allowance*multiplier, + 1< maxDiff-ulpBinary { + // we went too far + return false + } + if d.nd == 1 && d.d[0] == '0' { + // the number has actually reached zero. + d.nd = 0 + d.dp = 0 + } + return true +} diff --git a/vendor/github.com/pquerna/ffjson/fflib/v1/fold.go b/vendor/github.com/pquerna/ffjson/fflib/v1/fold.go new file mode 100644 index 000000000..4d33e6f77 --- /dev/null +++ b/vendor/github.com/pquerna/ffjson/fflib/v1/fold.go @@ -0,0 +1,121 @@ +/** + * Copyright 2014 Paul Querna + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + */ + +/* Portions of this file are on Go stdlib's encoding/json/fold.go */ +// Copyright 2009 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +package v1 + +import ( + "unicode/utf8" +) + +const ( + caseMask = ^byte(0x20) // Mask to ignore case in ASCII. + kelvin = '\u212a' + smallLongEss = '\u017f' +) + +// equalFoldRight is a specialization of bytes.EqualFold when s is +// known to be all ASCII (including punctuation), but contains an 's', +// 'S', 'k', or 'K', requiring a Unicode fold on the bytes in t. +// See comments on foldFunc. +func EqualFoldRight(s, t []byte) bool { + for _, sb := range s { + if len(t) == 0 { + return false + } + tb := t[0] + if tb < utf8.RuneSelf { + if sb != tb { + sbUpper := sb & caseMask + if 'A' <= sbUpper && sbUpper <= 'Z' { + if sbUpper != tb&caseMask { + return false + } + } else { + return false + } + } + t = t[1:] + continue + } + // sb is ASCII and t is not. t must be either kelvin + // sign or long s; sb must be s, S, k, or K. + tr, size := utf8.DecodeRune(t) + switch sb { + case 's', 'S': + if tr != smallLongEss { + return false + } + case 'k', 'K': + if tr != kelvin { + return false + } + default: + return false + } + t = t[size:] + + } + if len(t) > 0 { + return false + } + return true +} + +// asciiEqualFold is a specialization of bytes.EqualFold for use when +// s is all ASCII (but may contain non-letters) and contains no +// special-folding letters. +// See comments on foldFunc. +func AsciiEqualFold(s, t []byte) bool { + if len(s) != len(t) { + return false + } + for i, sb := range s { + tb := t[i] + if sb == tb { + continue + } + if ('a' <= sb && sb <= 'z') || ('A' <= sb && sb <= 'Z') { + if sb&caseMask != tb&caseMask { + return false + } + } else { + return false + } + } + return true +} + +// simpleLetterEqualFold is a specialization of bytes.EqualFold for +// use when s is all ASCII letters (no underscores, etc) and also +// doesn't contain 'k', 'K', 's', or 'S'. +// See comments on foldFunc. +func SimpleLetterEqualFold(s, t []byte) bool { + if len(s) != len(t) { + return false + } + for i, b := range s { + if b&caseMask != t[i]&caseMask { + return false + } + } + return true +} diff --git a/vendor/github.com/pquerna/ffjson/fflib/v1/ftoa.go b/vendor/github.com/pquerna/ffjson/fflib/v1/ftoa.go new file mode 100644 index 000000000..360d6dbcf --- /dev/null +++ b/vendor/github.com/pquerna/ffjson/fflib/v1/ftoa.go @@ -0,0 +1,542 @@ +package v1 + +/** + * Copyright 2015 Paul Querna, Klaus Post + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + */ + +/* Most of this file are on Go stdlib's strconv/ftoa.go */ +// Copyright 2009 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +import "math" + +// TODO: move elsewhere? +type floatInfo struct { + mantbits uint + expbits uint + bias int +} + +var optimize = true // can change for testing + +var float32info = floatInfo{23, 8, -127} +var float64info = floatInfo{52, 11, -1023} + +// AppendFloat appends the string form of the floating-point number f, +// as generated by FormatFloat +func AppendFloat(dst EncodingBuffer, val float64, fmt byte, prec, bitSize int) { + var bits uint64 + var flt *floatInfo + switch bitSize { + case 32: + bits = uint64(math.Float32bits(float32(val))) + flt = &float32info + case 64: + bits = math.Float64bits(val) + flt = &float64info + default: + panic("strconv: illegal AppendFloat/FormatFloat bitSize") + } + + neg := bits>>(flt.expbits+flt.mantbits) != 0 + exp := int(bits>>flt.mantbits) & (1< digs.nd && digs.nd >= digs.dp { + eprec = digs.nd + } + // %e is used if the exponent from the conversion + // is less than -4 or greater than or equal to the precision. + // if precision was the shortest possible, use precision 6 for this decision. + if shortest { + eprec = 6 + } + exp := digs.dp - 1 + if exp < -4 || exp >= eprec { + if prec > digs.nd { + prec = digs.nd + } + fmtE(dst, neg, digs, prec-1, fmt+'e'-'g') + return + } + if prec > digs.dp { + prec = digs.nd + } + fmtF(dst, neg, digs, max(prec-digs.dp, 0)) + return + } + + // unknown format + dst.Write([]byte{'%', fmt}) + return +} + +// Round d (= mant * 2^exp) to the shortest number of digits +// that will let the original floating point value be precisely +// reconstructed. Size is original floating point size (64 or 32). +func roundShortest(d *decimal, mant uint64, exp int, flt *floatInfo) { + // If mantissa is zero, the number is zero; stop now. + if mant == 0 { + d.nd = 0 + return + } + + // Compute upper and lower such that any decimal number + // between upper and lower (possibly inclusive) + // will round to the original floating point number. + + // We may see at once that the number is already shortest. + // + // Suppose d is not denormal, so that 2^exp <= d < 10^dp. + // The closest shorter number is at least 10^(dp-nd) away. + // The lower/upper bounds computed below are at distance + // at most 2^(exp-mantbits). + // + // So the number is already shortest if 10^(dp-nd) > 2^(exp-mantbits), + // or equivalently log2(10)*(dp-nd) > exp-mantbits. + // It is true if 332/100*(dp-nd) >= exp-mantbits (log2(10) > 3.32). + minexp := flt.bias + 1 // minimum possible exponent + if exp > minexp && 332*(d.dp-d.nd) >= 100*(exp-int(flt.mantbits)) { + // The number is already shortest. + return + } + + // d = mant << (exp - mantbits) + // Next highest floating point number is mant+1 << exp-mantbits. + // Our upper bound is halfway between, mant*2+1 << exp-mantbits-1. + upper := new(decimal) + upper.Assign(mant*2 + 1) + upper.Shift(exp - int(flt.mantbits) - 1) + + // d = mant << (exp - mantbits) + // Next lowest floating point number is mant-1 << exp-mantbits, + // unless mant-1 drops the significant bit and exp is not the minimum exp, + // in which case the next lowest is mant*2-1 << exp-mantbits-1. + // Either way, call it mantlo << explo-mantbits. + // Our lower bound is halfway between, mantlo*2+1 << explo-mantbits-1. + var mantlo uint64 + var explo int + if mant > 1< 0 { + dst.WriteByte('.') + i := 1 + m := min(d.nd, prec+1) + if i < m { + dst.Write(d.d[i:m]) + i = m + } + for i <= prec { + dst.WriteByte('0') + i++ + } + } + + // e± + dst.WriteByte(fmt) + exp := d.dp - 1 + if d.nd == 0 { // special case: 0 has exponent 0 + exp = 0 + } + if exp < 0 { + ch = '-' + exp = -exp + } else { + ch = '+' + } + dst.WriteByte(ch) + + // dd or ddd + switch { + case exp < 10: + dst.WriteByte('0') + dst.WriteByte(byte(exp) + '0') + case exp < 100: + dst.WriteByte(byte(exp/10) + '0') + dst.WriteByte(byte(exp%10) + '0') + default: + dst.WriteByte(byte(exp/100) + '0') + dst.WriteByte(byte(exp/10)%10 + '0') + dst.WriteByte(byte(exp%10) + '0') + } + + return +} + +// %f: -ddddddd.ddddd +func fmtF(dst EncodingBuffer, neg bool, d decimalSlice, prec int) { + // sign + if neg { + dst.WriteByte('-') + } + + // integer, padded with zeros as needed. + if d.dp > 0 { + m := min(d.nd, d.dp) + dst.Write(d.d[:m]) + for ; m < d.dp; m++ { + dst.WriteByte('0') + } + } else { + dst.WriteByte('0') + } + + // fraction + if prec > 0 { + dst.WriteByte('.') + for i := 0; i < prec; i++ { + ch := byte('0') + if j := d.dp + i; 0 <= j && j < d.nd { + ch = d.d[j] + } + dst.WriteByte(ch) + } + } + + return +} + +// %b: -ddddddddp±ddd +func fmtB(dst EncodingBuffer, neg bool, mant uint64, exp int, flt *floatInfo) { + // sign + if neg { + dst.WriteByte('-') + } + + // mantissa + formatBits(dst, mant, 10, false) + + // p + dst.WriteByte('p') + + // ±exponent + exp -= int(flt.mantbits) + if exp >= 0 { + dst.WriteByte('+') + } + formatBits(dst, uint64(exp), 10, exp < 0) + + return +} + +func min(a, b int) int { + if a < b { + return a + } + return b +} + +func max(a, b int) int { + if a > b { + return a + } + return b +} + +// formatBits computes the string representation of u in the given base. +// If neg is set, u is treated as negative int64 value. +func formatBits(dst EncodingBuffer, u uint64, base int, neg bool) { + if base < 2 || base > len(digits) { + panic("strconv: illegal AppendInt/FormatInt base") + } + // 2 <= base && base <= len(digits) + + var a [64 + 1]byte // +1 for sign of 64bit value in base 2 + i := len(a) + + if neg { + u = -u + } + + // convert bits + if base == 10 { + // common case: use constants for / because + // the compiler can optimize it into a multiply+shift + + if ^uintptr(0)>>32 == 0 { + for u > uint64(^uintptr(0)) { + q := u / 1e9 + us := uintptr(u - q*1e9) // us % 1e9 fits into a uintptr + for j := 9; j > 0; j-- { + i-- + qs := us / 10 + a[i] = byte(us - qs*10 + '0') + us = qs + } + u = q + } + } + + // u guaranteed to fit into a uintptr + us := uintptr(u) + for us >= 10 { + i-- + q := us / 10 + a[i] = byte(us - q*10 + '0') + us = q + } + // u < 10 + i-- + a[i] = byte(us + '0') + + } else if s := shifts[base]; s > 0 { + // base is power of 2: use shifts and masks instead of / and % + b := uint64(base) + m := uintptr(b) - 1 // == 1<= b { + i-- + a[i] = digits[uintptr(u)&m] + u >>= s + } + // u < base + i-- + a[i] = digits[uintptr(u)] + + } else { + // general case + b := uint64(base) + for u >= b { + i-- + q := u / b + a[i] = digits[uintptr(u-q*b)] + u = q + } + // u < base + i-- + a[i] = digits[uintptr(u)] + } + + // add sign, if any + if neg { + i-- + a[i] = '-' + } + + dst.Write(a[i:]) +} diff --git a/vendor/github.com/pquerna/ffjson/fflib/v1/internal/atof.go b/vendor/github.com/pquerna/ffjson/fflib/v1/internal/atof.go new file mode 100644 index 000000000..46c1289ec --- /dev/null +++ b/vendor/github.com/pquerna/ffjson/fflib/v1/internal/atof.go @@ -0,0 +1,936 @@ +/** + * Copyright 2014 Paul Querna + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + */ + +/* Portions of this file are on Go stdlib's strconv/atof.go */ + +// Copyright 2009 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +package internal + +// decimal to binary floating point conversion. +// Algorithm: +// 1) Store input in multiprecision decimal. +// 2) Multiply/divide decimal by powers of two until in range [0.5, 1) +// 3) Multiply by 2^precision and round to get mantissa. + +import "math" + +var optimize = true // can change for testing + +func equalIgnoreCase(s1 []byte, s2 []byte) bool { + if len(s1) != len(s2) { + return false + } + for i := 0; i < len(s1); i++ { + c1 := s1[i] + if 'A' <= c1 && c1 <= 'Z' { + c1 += 'a' - 'A' + } + c2 := s2[i] + if 'A' <= c2 && c2 <= 'Z' { + c2 += 'a' - 'A' + } + if c1 != c2 { + return false + } + } + return true +} + +func special(s []byte) (f float64, ok bool) { + if len(s) == 0 { + return + } + switch s[0] { + default: + return + case '+': + if equalIgnoreCase(s, []byte("+inf")) || equalIgnoreCase(s, []byte("+infinity")) { + return math.Inf(1), true + } + case '-': + if equalIgnoreCase(s, []byte("-inf")) || equalIgnoreCase(s, []byte("-infinity")) { + return math.Inf(-1), true + } + case 'n', 'N': + if equalIgnoreCase(s, []byte("nan")) { + return math.NaN(), true + } + case 'i', 'I': + if equalIgnoreCase(s, []byte("inf")) || equalIgnoreCase(s, []byte("infinity")) { + return math.Inf(1), true + } + } + return +} + +func (b *decimal) set(s []byte) (ok bool) { + i := 0 + b.neg = false + b.trunc = false + + // optional sign + if i >= len(s) { + return + } + switch { + case s[i] == '+': + i++ + case s[i] == '-': + b.neg = true + i++ + } + + // digits + sawdot := false + sawdigits := false + for ; i < len(s); i++ { + switch { + case s[i] == '.': + if sawdot { + return + } + sawdot = true + b.dp = b.nd + continue + + case '0' <= s[i] && s[i] <= '9': + sawdigits = true + if s[i] == '0' && b.nd == 0 { // ignore leading zeros + b.dp-- + continue + } + if b.nd < len(b.d) { + b.d[b.nd] = s[i] + b.nd++ + } else if s[i] != '0' { + b.trunc = true + } + continue + } + break + } + if !sawdigits { + return + } + if !sawdot { + b.dp = b.nd + } + + // optional exponent moves decimal point. + // if we read a very large, very long number, + // just be sure to move the decimal point by + // a lot (say, 100000). it doesn't matter if it's + // not the exact number. + if i < len(s) && (s[i] == 'e' || s[i] == 'E') { + i++ + if i >= len(s) { + return + } + esign := 1 + if s[i] == '+' { + i++ + } else if s[i] == '-' { + i++ + esign = -1 + } + if i >= len(s) || s[i] < '0' || s[i] > '9' { + return + } + e := 0 + for ; i < len(s) && '0' <= s[i] && s[i] <= '9'; i++ { + if e < 10000 { + e = e*10 + int(s[i]) - '0' + } + } + b.dp += e * esign + } + + if i != len(s) { + return + } + + ok = true + return +} + +// readFloat reads a decimal mantissa and exponent from a float +// string representation. It sets ok to false if the number could +// not fit return types or is invalid. +func readFloat(s []byte) (mantissa uint64, exp int, neg, trunc, ok bool) { + const uint64digits = 19 + i := 0 + + // optional sign + if i >= len(s) { + return + } + switch { + case s[i] == '+': + i++ + case s[i] == '-': + neg = true + i++ + } + + // digits + sawdot := false + sawdigits := false + nd := 0 + ndMant := 0 + dp := 0 + for ; i < len(s); i++ { + switch c := s[i]; true { + case c == '.': + if sawdot { + return + } + sawdot = true + dp = nd + continue + + case '0' <= c && c <= '9': + sawdigits = true + if c == '0' && nd == 0 { // ignore leading zeros + dp-- + continue + } + nd++ + if ndMant < uint64digits { + mantissa *= 10 + mantissa += uint64(c - '0') + ndMant++ + } else if s[i] != '0' { + trunc = true + } + continue + } + break + } + if !sawdigits { + return + } + if !sawdot { + dp = nd + } + + // optional exponent moves decimal point. + // if we read a very large, very long number, + // just be sure to move the decimal point by + // a lot (say, 100000). it doesn't matter if it's + // not the exact number. + if i < len(s) && (s[i] == 'e' || s[i] == 'E') { + i++ + if i >= len(s) { + return + } + esign := 1 + if s[i] == '+' { + i++ + } else if s[i] == '-' { + i++ + esign = -1 + } + if i >= len(s) || s[i] < '0' || s[i] > '9' { + return + } + e := 0 + for ; i < len(s) && '0' <= s[i] && s[i] <= '9'; i++ { + if e < 10000 { + e = e*10 + int(s[i]) - '0' + } + } + dp += e * esign + } + + if i != len(s) { + return + } + + exp = dp - ndMant + ok = true + return + +} + +// decimal power of ten to binary power of two. +var powtab = []int{1, 3, 6, 9, 13, 16, 19, 23, 26} + +func (d *decimal) floatBits(flt *floatInfo) (b uint64, overflow bool) { + var exp int + var mant uint64 + + // Zero is always a special case. + if d.nd == 0 { + mant = 0 + exp = flt.bias + goto out + } + + // Obvious overflow/underflow. + // These bounds are for 64-bit floats. + // Will have to change if we want to support 80-bit floats in the future. + if d.dp > 310 { + goto overflow + } + if d.dp < -330 { + // zero + mant = 0 + exp = flt.bias + goto out + } + + // Scale by powers of two until in range [0.5, 1.0) + exp = 0 + for d.dp > 0 { + var n int + if d.dp >= len(powtab) { + n = 27 + } else { + n = powtab[d.dp] + } + d.Shift(-n) + exp += n + } + for d.dp < 0 || d.dp == 0 && d.d[0] < '5' { + var n int + if -d.dp >= len(powtab) { + n = 27 + } else { + n = powtab[-d.dp] + } + d.Shift(n) + exp -= n + } + + // Our range is [0.5,1) but floating point range is [1,2). + exp-- + + // Minimum representable exponent is flt.bias+1. + // If the exponent is smaller, move it up and + // adjust d accordingly. + if exp < flt.bias+1 { + n := flt.bias + 1 - exp + d.Shift(-n) + exp += n + } + + if exp-flt.bias >= 1<>= 1 + exp++ + if exp-flt.bias >= 1<>float64info.mantbits != 0 { + return + } + f = float64(mantissa) + if neg { + f = -f + } + switch { + case exp == 0: + // an integer. + return f, true + // Exact integers are <= 10^15. + // Exact powers of ten are <= 10^22. + case exp > 0 && exp <= 15+22: // int * 10^k + // If exponent is big but number of digits is not, + // can move a few zeros into the integer part. + if exp > 22 { + f *= float64pow10[exp-22] + exp = 22 + } + if f > 1e15 || f < -1e15 { + // the exponent was really too large. + return + } + return f * float64pow10[exp], true + case exp < 0 && exp >= -22: // int / 10^k + return f / float64pow10[-exp], true + } + return +} + +// If possible to compute mantissa*10^exp to 32-bit float f exactly, +// entirely in floating-point math, do so, avoiding the machinery above. +func atof32exact(mantissa uint64, exp int, neg bool) (f float32, ok bool) { + if mantissa>>float32info.mantbits != 0 { + return + } + f = float32(mantissa) + if neg { + f = -f + } + switch { + case exp == 0: + return f, true + // Exact integers are <= 10^7. + // Exact powers of ten are <= 10^10. + case exp > 0 && exp <= 7+10: // int * 10^k + // If exponent is big but number of digits is not, + // can move a few zeros into the integer part. + if exp > 10 { + f *= float32pow10[exp-10] + exp = 10 + } + if f > 1e7 || f < -1e7 { + // the exponent was really too large. + return + } + return f * float32pow10[exp], true + case exp < 0 && exp >= -10: // int / 10^k + return f / float32pow10[-exp], true + } + return +} + +const fnParseFloat = "ParseFloat" + +func atof32(s []byte) (f float32, err error) { + if val, ok := special(s); ok { + return float32(val), nil + } + + if optimize { + // Parse mantissa and exponent. + mantissa, exp, neg, trunc, ok := readFloat(s) + if ok { + // Try pure floating-point arithmetic conversion. + if !trunc { + if f, ok := atof32exact(mantissa, exp, neg); ok { + return f, nil + } + } + // Try another fast path. + ext := new(extFloat) + if ok := ext.AssignDecimal(mantissa, exp, neg, trunc, &float32info); ok { + b, ovf := ext.floatBits(&float32info) + f = math.Float32frombits(uint32(b)) + if ovf { + err = rangeError(fnParseFloat, string(s)) + } + return f, err + } + } + } + var d decimal + if !d.set(s) { + return 0, syntaxError(fnParseFloat, string(s)) + } + b, ovf := d.floatBits(&float32info) + f = math.Float32frombits(uint32(b)) + if ovf { + err = rangeError(fnParseFloat, string(s)) + } + return f, err +} + +func atof64(s []byte) (f float64, err error) { + if val, ok := special(s); ok { + return val, nil + } + + if optimize { + // Parse mantissa and exponent. + mantissa, exp, neg, trunc, ok := readFloat(s) + if ok { + // Try pure floating-point arithmetic conversion. + if !trunc { + if f, ok := atof64exact(mantissa, exp, neg); ok { + return f, nil + } + } + // Try another fast path. + ext := new(extFloat) + if ok := ext.AssignDecimal(mantissa, exp, neg, trunc, &float64info); ok { + b, ovf := ext.floatBits(&float64info) + f = math.Float64frombits(b) + if ovf { + err = rangeError(fnParseFloat, string(s)) + } + return f, err + } + } + } + var d decimal + if !d.set(s) { + return 0, syntaxError(fnParseFloat, string(s)) + } + b, ovf := d.floatBits(&float64info) + f = math.Float64frombits(b) + if ovf { + err = rangeError(fnParseFloat, string(s)) + } + return f, err +} + +// ParseFloat converts the string s to a floating-point number +// with the precision specified by bitSize: 32 for float32, or 64 for float64. +// When bitSize=32, the result still has type float64, but it will be +// convertible to float32 without changing its value. +// +// If s is well-formed and near a valid floating point number, +// ParseFloat returns the nearest floating point number rounded +// using IEEE754 unbiased rounding. +// +// The errors that ParseFloat returns have concrete type *NumError +// and include err.Num = s. +// +// If s is not syntactically well-formed, ParseFloat returns err.Err = ErrSyntax. +// +// If s is syntactically well-formed but is more than 1/2 ULP +// away from the largest floating point number of the given size, +// ParseFloat returns f = ±Inf, err.Err = ErrRange. +func ParseFloat(s []byte, bitSize int) (f float64, err error) { + if bitSize == 32 { + f1, err1 := atof32(s) + return float64(f1), err1 + } + f1, err1 := atof64(s) + return f1, err1 +} + +// oroginal: strconv/decimal.go, but not exported, and needed for PareFloat. + +// Copyright 2009 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// Multiprecision decimal numbers. +// For floating-point formatting only; not general purpose. +// Only operations are assign and (binary) left/right shift. +// Can do binary floating point in multiprecision decimal precisely +// because 2 divides 10; cannot do decimal floating point +// in multiprecision binary precisely. + +type decimal struct { + d [800]byte // digits + nd int // number of digits used + dp int // decimal point + neg bool + trunc bool // discarded nonzero digits beyond d[:nd] +} + +func (a *decimal) String() string { + n := 10 + a.nd + if a.dp > 0 { + n += a.dp + } + if a.dp < 0 { + n += -a.dp + } + + buf := make([]byte, n) + w := 0 + switch { + case a.nd == 0: + return "0" + + case a.dp <= 0: + // zeros fill space between decimal point and digits + buf[w] = '0' + w++ + buf[w] = '.' + w++ + w += digitZero(buf[w : w+-a.dp]) + w += copy(buf[w:], a.d[0:a.nd]) + + case a.dp < a.nd: + // decimal point in middle of digits + w += copy(buf[w:], a.d[0:a.dp]) + buf[w] = '.' + w++ + w += copy(buf[w:], a.d[a.dp:a.nd]) + + default: + // zeros fill space between digits and decimal point + w += copy(buf[w:], a.d[0:a.nd]) + w += digitZero(buf[w : w+a.dp-a.nd]) + } + return string(buf[0:w]) +} + +func digitZero(dst []byte) int { + for i := range dst { + dst[i] = '0' + } + return len(dst) +} + +// trim trailing zeros from number. +// (They are meaningless; the decimal point is tracked +// independent of the number of digits.) +func trim(a *decimal) { + for a.nd > 0 && a.d[a.nd-1] == '0' { + a.nd-- + } + if a.nd == 0 { + a.dp = 0 + } +} + +// Assign v to a. +func (a *decimal) Assign(v uint64) { + var buf [24]byte + + // Write reversed decimal in buf. + n := 0 + for v > 0 { + v1 := v / 10 + v -= 10 * v1 + buf[n] = byte(v + '0') + n++ + v = v1 + } + + // Reverse again to produce forward decimal in a.d. + a.nd = 0 + for n--; n >= 0; n-- { + a.d[a.nd] = buf[n] + a.nd++ + } + a.dp = a.nd + trim(a) +} + +// Maximum shift that we can do in one pass without overflow. +// Signed int has 31 bits, and we have to be able to accommodate 9<>k == 0; r++ { + if r >= a.nd { + if n == 0 { + // a == 0; shouldn't get here, but handle anyway. + a.nd = 0 + return + } + for n>>k == 0 { + n = n * 10 + r++ + } + break + } + c := int(a.d[r]) + n = n*10 + c - '0' + } + a.dp -= r - 1 + + // Pick up a digit, put down a digit. + for ; r < a.nd; r++ { + c := int(a.d[r]) + dig := n >> k + n -= dig << k + a.d[w] = byte(dig + '0') + w++ + n = n*10 + c - '0' + } + + // Put down extra digits. + for n > 0 { + dig := n >> k + n -= dig << k + if w < len(a.d) { + a.d[w] = byte(dig + '0') + w++ + } else if dig > 0 { + a.trunc = true + } + n = n * 10 + } + + a.nd = w + trim(a) +} + +// Cheat sheet for left shift: table indexed by shift count giving +// number of new digits that will be introduced by that shift. +// +// For example, leftcheats[4] = {2, "625"}. That means that +// if we are shifting by 4 (multiplying by 16), it will add 2 digits +// when the string prefix is "625" through "999", and one fewer digit +// if the string prefix is "000" through "624". +// +// Credit for this trick goes to Ken. + +type leftCheat struct { + delta int // number of new digits + cutoff string // minus one digit if original < a. +} + +var leftcheats = []leftCheat{ + // Leading digits of 1/2^i = 5^i. + // 5^23 is not an exact 64-bit floating point number, + // so have to use bc for the math. + /* + seq 27 | sed 's/^/5^/' | bc | + awk 'BEGIN{ print "\tleftCheat{ 0, \"\" }," } + { + log2 = log(2)/log(10) + printf("\tleftCheat{ %d, \"%s\" },\t// * %d\n", + int(log2*NR+1), $0, 2**NR) + }' + */ + {0, ""}, + {1, "5"}, // * 2 + {1, "25"}, // * 4 + {1, "125"}, // * 8 + {2, "625"}, // * 16 + {2, "3125"}, // * 32 + {2, "15625"}, // * 64 + {3, "78125"}, // * 128 + {3, "390625"}, // * 256 + {3, "1953125"}, // * 512 + {4, "9765625"}, // * 1024 + {4, "48828125"}, // * 2048 + {4, "244140625"}, // * 4096 + {4, "1220703125"}, // * 8192 + {5, "6103515625"}, // * 16384 + {5, "30517578125"}, // * 32768 + {5, "152587890625"}, // * 65536 + {6, "762939453125"}, // * 131072 + {6, "3814697265625"}, // * 262144 + {6, "19073486328125"}, // * 524288 + {7, "95367431640625"}, // * 1048576 + {7, "476837158203125"}, // * 2097152 + {7, "2384185791015625"}, // * 4194304 + {7, "11920928955078125"}, // * 8388608 + {8, "59604644775390625"}, // * 16777216 + {8, "298023223876953125"}, // * 33554432 + {8, "1490116119384765625"}, // * 67108864 + {9, "7450580596923828125"}, // * 134217728 +} + +// Is the leading prefix of b lexicographically less than s? +func prefixIsLessThan(b []byte, s string) bool { + for i := 0; i < len(s); i++ { + if i >= len(b) { + return true + } + if b[i] != s[i] { + return b[i] < s[i] + } + } + return false +} + +// Binary shift left (/ 2) by k bits. k <= maxShift to avoid overflow. +func leftShift(a *decimal, k uint) { + delta := leftcheats[k].delta + if prefixIsLessThan(a.d[0:a.nd], leftcheats[k].cutoff) { + delta-- + } + + r := a.nd // read index + w := a.nd + delta // write index + n := 0 + + // Pick up a digit, put down a digit. + for r--; r >= 0; r-- { + n += (int(a.d[r]) - '0') << k + quo := n / 10 + rem := n - 10*quo + w-- + if w < len(a.d) { + a.d[w] = byte(rem + '0') + } else if rem != 0 { + a.trunc = true + } + n = quo + } + + // Put down extra digits. + for n > 0 { + quo := n / 10 + rem := n - 10*quo + w-- + if w < len(a.d) { + a.d[w] = byte(rem + '0') + } else if rem != 0 { + a.trunc = true + } + n = quo + } + + a.nd += delta + if a.nd >= len(a.d) { + a.nd = len(a.d) + } + a.dp += delta + trim(a) +} + +// Binary shift left (k > 0) or right (k < 0). +func (a *decimal) Shift(k int) { + switch { + case a.nd == 0: + // nothing to do: a == 0 + case k > 0: + for k > maxShift { + leftShift(a, maxShift) + k -= maxShift + } + leftShift(a, uint(k)) + case k < 0: + for k < -maxShift { + rightShift(a, maxShift) + k += maxShift + } + rightShift(a, uint(-k)) + } +} + +// If we chop a at nd digits, should we round up? +func shouldRoundUp(a *decimal, nd int) bool { + if nd < 0 || nd >= a.nd { + return false + } + if a.d[nd] == '5' && nd+1 == a.nd { // exactly halfway - round to even + // if we truncated, a little higher than what's recorded - always round up + if a.trunc { + return true + } + return nd > 0 && (a.d[nd-1]-'0')%2 != 0 + } + // not halfway - digit tells all + return a.d[nd] >= '5' +} + +// Round a to nd digits (or fewer). +// If nd is zero, it means we're rounding +// just to the left of the digits, as in +// 0.09 -> 0.1. +func (a *decimal) Round(nd int) { + if nd < 0 || nd >= a.nd { + return + } + if shouldRoundUp(a, nd) { + a.RoundUp(nd) + } else { + a.RoundDown(nd) + } +} + +// Round a down to nd digits (or fewer). +func (a *decimal) RoundDown(nd int) { + if nd < 0 || nd >= a.nd { + return + } + a.nd = nd + trim(a) +} + +// Round a up to nd digits (or fewer). +func (a *decimal) RoundUp(nd int) { + if nd < 0 || nd >= a.nd { + return + } + + // round up + for i := nd - 1; i >= 0; i-- { + c := a.d[i] + if c < '9' { // can stop after this digit + a.d[i]++ + a.nd = i + 1 + return + } + } + + // Number is all 9s. + // Change to single 1 with adjusted decimal point. + a.d[0] = '1' + a.nd = 1 + a.dp++ +} + +// Extract integer part, rounded appropriately. +// No guarantees about overflow. +func (a *decimal) RoundedInteger() uint64 { + if a.dp > 20 { + return 0xFFFFFFFFFFFFFFFF + } + var i int + n := uint64(0) + for i = 0; i < a.dp && i < a.nd; i++ { + n = n*10 + uint64(a.d[i]-'0') + } + for ; i < a.dp; i++ { + n *= 10 + } + if shouldRoundUp(a, a.dp) { + n++ + } + return n +} diff --git a/vendor/github.com/pquerna/ffjson/fflib/v1/internal/atoi.go b/vendor/github.com/pquerna/ffjson/fflib/v1/internal/atoi.go new file mode 100644 index 000000000..06eb2ec29 --- /dev/null +++ b/vendor/github.com/pquerna/ffjson/fflib/v1/internal/atoi.go @@ -0,0 +1,213 @@ +/** + * Copyright 2014 Paul Querna + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + */ + +/* Portions of this file are on Go stdlib's strconv/atoi.go */ +// Copyright 2009 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +package internal + +import ( + "errors" + "strconv" +) + +// ErrRange indicates that a value is out of range for the target type. +var ErrRange = errors.New("value out of range") + +// ErrSyntax indicates that a value does not have the right syntax for the target type. +var ErrSyntax = errors.New("invalid syntax") + +// A NumError records a failed conversion. +type NumError struct { + Func string // the failing function (ParseBool, ParseInt, ParseUint, ParseFloat) + Num string // the input + Err error // the reason the conversion failed (ErrRange, ErrSyntax) +} + +func (e *NumError) Error() string { + return "strconv." + e.Func + ": " + "parsing " + strconv.Quote(e.Num) + ": " + e.Err.Error() +} + +func syntaxError(fn, str string) *NumError { + return &NumError{fn, str, ErrSyntax} +} + +func rangeError(fn, str string) *NumError { + return &NumError{fn, str, ErrRange} +} + +const intSize = 32 << uint(^uint(0)>>63) + +// IntSize is the size in bits of an int or uint value. +const IntSize = intSize + +// Return the first number n such that n*base >= 1<<64. +func cutoff64(base int) uint64 { + if base < 2 { + return 0 + } + return (1<<64-1)/uint64(base) + 1 +} + +// ParseUint is like ParseInt but for unsigned numbers, and oeprating on []byte +func ParseUint(s []byte, base int, bitSize int) (n uint64, err error) { + var cutoff, maxVal uint64 + + if bitSize == 0 { + bitSize = int(IntSize) + } + + s0 := s + switch { + case len(s) < 1: + err = ErrSyntax + goto Error + + case 2 <= base && base <= 36: + // valid base; nothing to do + + case base == 0: + // Look for octal, hex prefix. + switch { + case s[0] == '0' && len(s) > 1 && (s[1] == 'x' || s[1] == 'X'): + base = 16 + s = s[2:] + if len(s) < 1 { + err = ErrSyntax + goto Error + } + case s[0] == '0': + base = 8 + default: + base = 10 + } + + default: + err = errors.New("invalid base " + strconv.Itoa(base)) + goto Error + } + + n = 0 + cutoff = cutoff64(base) + maxVal = 1<= base { + n = 0 + err = ErrSyntax + goto Error + } + + if n >= cutoff { + // n*base overflows + n = 1<<64 - 1 + err = ErrRange + goto Error + } + n *= uint64(base) + + n1 := n + uint64(v) + if n1 < n || n1 > maxVal { + // n+v overflows + n = 1<<64 - 1 + err = ErrRange + goto Error + } + n = n1 + } + + return n, nil + +Error: + return n, &NumError{"ParseUint", string(s0), err} +} + +// ParseInt interprets a string s in the given base (2 to 36) and +// returns the corresponding value i. If base == 0, the base is +// implied by the string's prefix: base 16 for "0x", base 8 for +// "0", and base 10 otherwise. +// +// The bitSize argument specifies the integer type +// that the result must fit into. Bit sizes 0, 8, 16, 32, and 64 +// correspond to int, int8, int16, int32, and int64. +// +// The errors that ParseInt returns have concrete type *NumError +// and include err.Num = s. If s is empty or contains invalid +// digits, err.Err = ErrSyntax and the returned value is 0; +// if the value corresponding to s cannot be represented by a +// signed integer of the given size, err.Err = ErrRange and the +// returned value is the maximum magnitude integer of the +// appropriate bitSize and sign. +func ParseInt(s []byte, base int, bitSize int) (i int64, err error) { + const fnParseInt = "ParseInt" + + if bitSize == 0 { + bitSize = int(IntSize) + } + + // Empty string bad. + if len(s) == 0 { + return 0, syntaxError(fnParseInt, string(s)) + } + + // Pick off leading sign. + s0 := s + neg := false + if s[0] == '+' { + s = s[1:] + } else if s[0] == '-' { + neg = true + s = s[1:] + } + + // Convert unsigned and check range. + var un uint64 + un, err = ParseUint(s, base, bitSize) + if err != nil && err.(*NumError).Err != ErrRange { + err.(*NumError).Func = fnParseInt + err.(*NumError).Num = string(s0) + return 0, err + } + cutoff := uint64(1 << uint(bitSize-1)) + if !neg && un >= cutoff { + return int64(cutoff - 1), rangeError(fnParseInt, string(s0)) + } + if neg && un > cutoff { + return -int64(cutoff), rangeError(fnParseInt, string(s0)) + } + n := int64(un) + if neg { + n = -n + } + return n, nil +} diff --git a/vendor/github.com/pquerna/ffjson/fflib/v1/internal/extfloat.go b/vendor/github.com/pquerna/ffjson/fflib/v1/internal/extfloat.go new file mode 100644 index 000000000..ab791085a --- /dev/null +++ b/vendor/github.com/pquerna/ffjson/fflib/v1/internal/extfloat.go @@ -0,0 +1,668 @@ +// Copyright 2011 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +package internal + +// An extFloat represents an extended floating-point number, with more +// precision than a float64. It does not try to save bits: the +// number represented by the structure is mant*(2^exp), with a negative +// sign if neg is true. +type extFloat struct { + mant uint64 + exp int + neg bool +} + +// Powers of ten taken from double-conversion library. +// http://code.google.com/p/double-conversion/ +const ( + firstPowerOfTen = -348 + stepPowerOfTen = 8 +) + +var smallPowersOfTen = [...]extFloat{ + {1 << 63, -63, false}, // 1 + {0xa << 60, -60, false}, // 1e1 + {0x64 << 57, -57, false}, // 1e2 + {0x3e8 << 54, -54, false}, // 1e3 + {0x2710 << 50, -50, false}, // 1e4 + {0x186a0 << 47, -47, false}, // 1e5 + {0xf4240 << 44, -44, false}, // 1e6 + {0x989680 << 40, -40, false}, // 1e7 +} + +var powersOfTen = [...]extFloat{ + {0xfa8fd5a0081c0288, -1220, false}, // 10^-348 + {0xbaaee17fa23ebf76, -1193, false}, // 10^-340 + {0x8b16fb203055ac76, -1166, false}, // 10^-332 + {0xcf42894a5dce35ea, -1140, false}, // 10^-324 + {0x9a6bb0aa55653b2d, -1113, false}, // 10^-316 + {0xe61acf033d1a45df, -1087, false}, // 10^-308 + {0xab70fe17c79ac6ca, -1060, false}, // 10^-300 + {0xff77b1fcbebcdc4f, -1034, false}, // 10^-292 + {0xbe5691ef416bd60c, -1007, false}, // 10^-284 + {0x8dd01fad907ffc3c, -980, false}, // 10^-276 + {0xd3515c2831559a83, -954, false}, // 10^-268 + {0x9d71ac8fada6c9b5, -927, false}, // 10^-260 + {0xea9c227723ee8bcb, -901, false}, // 10^-252 + {0xaecc49914078536d, -874, false}, // 10^-244 + {0x823c12795db6ce57, -847, false}, // 10^-236 + {0xc21094364dfb5637, -821, false}, // 10^-228 + {0x9096ea6f3848984f, -794, false}, // 10^-220 + {0xd77485cb25823ac7, -768, false}, // 10^-212 + {0xa086cfcd97bf97f4, -741, false}, // 10^-204 + {0xef340a98172aace5, -715, false}, // 10^-196 + {0xb23867fb2a35b28e, -688, false}, // 10^-188 + {0x84c8d4dfd2c63f3b, -661, false}, // 10^-180 + {0xc5dd44271ad3cdba, -635, false}, // 10^-172 + {0x936b9fcebb25c996, -608, false}, // 10^-164 + {0xdbac6c247d62a584, -582, false}, // 10^-156 + {0xa3ab66580d5fdaf6, -555, false}, // 10^-148 + {0xf3e2f893dec3f126, -529, false}, // 10^-140 + {0xb5b5ada8aaff80b8, -502, false}, // 10^-132 + {0x87625f056c7c4a8b, -475, false}, // 10^-124 + {0xc9bcff6034c13053, -449, false}, // 10^-116 + {0x964e858c91ba2655, -422, false}, // 10^-108 + {0xdff9772470297ebd, -396, false}, // 10^-100 + {0xa6dfbd9fb8e5b88f, -369, false}, // 10^-92 + {0xf8a95fcf88747d94, -343, false}, // 10^-84 + {0xb94470938fa89bcf, -316, false}, // 10^-76 + {0x8a08f0f8bf0f156b, -289, false}, // 10^-68 + {0xcdb02555653131b6, -263, false}, // 10^-60 + {0x993fe2c6d07b7fac, -236, false}, // 10^-52 + {0xe45c10c42a2b3b06, -210, false}, // 10^-44 + {0xaa242499697392d3, -183, false}, // 10^-36 + {0xfd87b5f28300ca0e, -157, false}, // 10^-28 + {0xbce5086492111aeb, -130, false}, // 10^-20 + {0x8cbccc096f5088cc, -103, false}, // 10^-12 + {0xd1b71758e219652c, -77, false}, // 10^-4 + {0x9c40000000000000, -50, false}, // 10^4 + {0xe8d4a51000000000, -24, false}, // 10^12 + {0xad78ebc5ac620000, 3, false}, // 10^20 + {0x813f3978f8940984, 30, false}, // 10^28 + {0xc097ce7bc90715b3, 56, false}, // 10^36 + {0x8f7e32ce7bea5c70, 83, false}, // 10^44 + {0xd5d238a4abe98068, 109, false}, // 10^52 + {0x9f4f2726179a2245, 136, false}, // 10^60 + {0xed63a231d4c4fb27, 162, false}, // 10^68 + {0xb0de65388cc8ada8, 189, false}, // 10^76 + {0x83c7088e1aab65db, 216, false}, // 10^84 + {0xc45d1df942711d9a, 242, false}, // 10^92 + {0x924d692ca61be758, 269, false}, // 10^100 + {0xda01ee641a708dea, 295, false}, // 10^108 + {0xa26da3999aef774a, 322, false}, // 10^116 + {0xf209787bb47d6b85, 348, false}, // 10^124 + {0xb454e4a179dd1877, 375, false}, // 10^132 + {0x865b86925b9bc5c2, 402, false}, // 10^140 + {0xc83553c5c8965d3d, 428, false}, // 10^148 + {0x952ab45cfa97a0b3, 455, false}, // 10^156 + {0xde469fbd99a05fe3, 481, false}, // 10^164 + {0xa59bc234db398c25, 508, false}, // 10^172 + {0xf6c69a72a3989f5c, 534, false}, // 10^180 + {0xb7dcbf5354e9bece, 561, false}, // 10^188 + {0x88fcf317f22241e2, 588, false}, // 10^196 + {0xcc20ce9bd35c78a5, 614, false}, // 10^204 + {0x98165af37b2153df, 641, false}, // 10^212 + {0xe2a0b5dc971f303a, 667, false}, // 10^220 + {0xa8d9d1535ce3b396, 694, false}, // 10^228 + {0xfb9b7cd9a4a7443c, 720, false}, // 10^236 + {0xbb764c4ca7a44410, 747, false}, // 10^244 + {0x8bab8eefb6409c1a, 774, false}, // 10^252 + {0xd01fef10a657842c, 800, false}, // 10^260 + {0x9b10a4e5e9913129, 827, false}, // 10^268 + {0xe7109bfba19c0c9d, 853, false}, // 10^276 + {0xac2820d9623bf429, 880, false}, // 10^284 + {0x80444b5e7aa7cf85, 907, false}, // 10^292 + {0xbf21e44003acdd2d, 933, false}, // 10^300 + {0x8e679c2f5e44ff8f, 960, false}, // 10^308 + {0xd433179d9c8cb841, 986, false}, // 10^316 + {0x9e19db92b4e31ba9, 1013, false}, // 10^324 + {0xeb96bf6ebadf77d9, 1039, false}, // 10^332 + {0xaf87023b9bf0ee6b, 1066, false}, // 10^340 +} + +// floatBits returns the bits of the float64 that best approximates +// the extFloat passed as receiver. Overflow is set to true if +// the resulting float64 is ±Inf. +func (f *extFloat) floatBits(flt *floatInfo) (bits uint64, overflow bool) { + f.Normalize() + + exp := f.exp + 63 + + // Exponent too small. + if exp < flt.bias+1 { + n := flt.bias + 1 - exp + f.mant >>= uint(n) + exp += n + } + + // Extract 1+flt.mantbits bits from the 64-bit mantissa. + mant := f.mant >> (63 - flt.mantbits) + if f.mant&(1<<(62-flt.mantbits)) != 0 { + // Round up. + mant += 1 + } + + // Rounding might have added a bit; shift down. + if mant == 2<>= 1 + exp++ + } + + // Infinities. + if exp-flt.bias >= 1<>uint(-f.exp))<>= uint(-f.exp) + f.exp = 0 + return *f, *f + } + expBiased := exp - flt.bias + + upper = extFloat{mant: 2*f.mant + 1, exp: f.exp - 1, neg: f.neg} + if mant != 1<>(64-32) == 0 { + mant <<= 32 + exp -= 32 + } + if mant>>(64-16) == 0 { + mant <<= 16 + exp -= 16 + } + if mant>>(64-8) == 0 { + mant <<= 8 + exp -= 8 + } + if mant>>(64-4) == 0 { + mant <<= 4 + exp -= 4 + } + if mant>>(64-2) == 0 { + mant <<= 2 + exp -= 2 + } + if mant>>(64-1) == 0 { + mant <<= 1 + exp -= 1 + } + shift = uint(f.exp - exp) + f.mant, f.exp = mant, exp + return +} + +// Multiply sets f to the product f*g: the result is correctly rounded, +// but not normalized. +func (f *extFloat) Multiply(g extFloat) { + fhi, flo := f.mant>>32, uint64(uint32(f.mant)) + ghi, glo := g.mant>>32, uint64(uint32(g.mant)) + + // Cross products. + cross1 := fhi * glo + cross2 := flo * ghi + + // f.mant*g.mant is fhi*ghi << 64 + (cross1+cross2) << 32 + flo*glo + f.mant = fhi*ghi + (cross1 >> 32) + (cross2 >> 32) + rem := uint64(uint32(cross1)) + uint64(uint32(cross2)) + ((flo * glo) >> 32) + // Round up. + rem += (1 << 31) + + f.mant += (rem >> 32) + f.exp = f.exp + g.exp + 64 +} + +var uint64pow10 = [...]uint64{ + 1, 1e1, 1e2, 1e3, 1e4, 1e5, 1e6, 1e7, 1e8, 1e9, + 1e10, 1e11, 1e12, 1e13, 1e14, 1e15, 1e16, 1e17, 1e18, 1e19, +} + +// AssignDecimal sets f to an approximate value mantissa*10^exp. It +// returns true if the value represented by f is guaranteed to be the +// best approximation of d after being rounded to a float64 or +// float32 depending on flt. +func (f *extFloat) AssignDecimal(mantissa uint64, exp10 int, neg bool, trunc bool, flt *floatInfo) (ok bool) { + const uint64digits = 19 + const errorscale = 8 + errors := 0 // An upper bound for error, computed in errorscale*ulp. + if trunc { + // the decimal number was truncated. + errors += errorscale / 2 + } + + f.mant = mantissa + f.exp = 0 + f.neg = neg + + // Multiply by powers of ten. + i := (exp10 - firstPowerOfTen) / stepPowerOfTen + if exp10 < firstPowerOfTen || i >= len(powersOfTen) { + return false + } + adjExp := (exp10 - firstPowerOfTen) % stepPowerOfTen + + // We multiply by exp%step + if adjExp < uint64digits && mantissa < uint64pow10[uint64digits-adjExp] { + // We can multiply the mantissa exactly. + f.mant *= uint64pow10[adjExp] + f.Normalize() + } else { + f.Normalize() + f.Multiply(smallPowersOfTen[adjExp]) + errors += errorscale / 2 + } + + // We multiply by 10 to the exp - exp%step. + f.Multiply(powersOfTen[i]) + if errors > 0 { + errors += 1 + } + errors += errorscale / 2 + + // Normalize + shift := f.Normalize() + errors <<= shift + + // Now f is a good approximation of the decimal. + // Check whether the error is too large: that is, if the mantissa + // is perturbated by the error, the resulting float64 will change. + // The 64 bits mantissa is 1 + 52 bits for float64 + 11 extra bits. + // + // In many cases the approximation will be good enough. + denormalExp := flt.bias - 63 + var extrabits uint + if f.exp <= denormalExp { + // f.mant * 2^f.exp is smaller than 2^(flt.bias+1). + extrabits = uint(63 - flt.mantbits + 1 + uint(denormalExp-f.exp)) + } else { + extrabits = uint(63 - flt.mantbits) + } + + halfway := uint64(1) << (extrabits - 1) + mant_extra := f.mant & (1< expMax: + i-- + default: + break Loop + } + } + // Apply the desired decimal shift on f. It will have exponent + // in the desired range. This is multiplication by 10^-exp10. + f.Multiply(powersOfTen[i]) + + return -(firstPowerOfTen + i*stepPowerOfTen), i +} + +// frexp10Many applies a common shift by a power of ten to a, b, c. +func frexp10Many(a, b, c *extFloat) (exp10 int) { + exp10, i := c.frexp10() + a.Multiply(powersOfTen[i]) + b.Multiply(powersOfTen[i]) + return +} + +// FixedDecimal stores in d the first n significant digits +// of the decimal representation of f. It returns false +// if it cannot be sure of the answer. +func (f *extFloat) FixedDecimal(d *decimalSlice, n int) bool { + if f.mant == 0 { + d.nd = 0 + d.dp = 0 + d.neg = f.neg + return true + } + if n == 0 { + panic("strconv: internal error: extFloat.FixedDecimal called with n == 0") + } + // Multiply by an appropriate power of ten to have a reasonable + // number to process. + f.Normalize() + exp10, _ := f.frexp10() + + shift := uint(-f.exp) + integer := uint32(f.mant >> shift) + fraction := f.mant - (uint64(integer) << shift) + ε := uint64(1) // ε is the uncertainty we have on the mantissa of f. + + // Write exactly n digits to d. + needed := n // how many digits are left to write. + integerDigits := 0 // the number of decimal digits of integer. + pow10 := uint64(1) // the power of ten by which f was scaled. + for i, pow := 0, uint64(1); i < 20; i++ { + if pow > uint64(integer) { + integerDigits = i + break + } + pow *= 10 + } + rest := integer + if integerDigits > needed { + // the integral part is already large, trim the last digits. + pow10 = uint64pow10[integerDigits-needed] + integer /= uint32(pow10) + rest -= integer * uint32(pow10) + } else { + rest = 0 + } + + // Write the digits of integer: the digits of rest are omitted. + var buf [32]byte + pos := len(buf) + for v := integer; v > 0; { + v1 := v / 10 + v -= 10 * v1 + pos-- + buf[pos] = byte(v + '0') + v = v1 + } + for i := pos; i < len(buf); i++ { + d.d[i-pos] = buf[i] + } + nd := len(buf) - pos + d.nd = nd + d.dp = integerDigits + exp10 + needed -= nd + + if needed > 0 { + if rest != 0 || pow10 != 1 { + panic("strconv: internal error, rest != 0 but needed > 0") + } + // Emit digits for the fractional part. Each time, 10*fraction + // fits in a uint64 without overflow. + for needed > 0 { + fraction *= 10 + ε *= 10 // the uncertainty scales as we multiply by ten. + if 2*ε > 1<> shift + d.d[nd] = byte(digit + '0') + fraction -= digit << shift + nd++ + needed-- + } + d.nd = nd + } + + // We have written a truncation of f (a numerator / 10^d.dp). The remaining part + // can be interpreted as a small number (< 1) to be added to the last digit of the + // numerator. + // + // If rest > 0, the amount is: + // (rest< 0 guarantees that pow10 << shift does not overflow a uint64. + // + // If rest = 0, pow10 == 1 and the amount is + // fraction / (1 << shift) + // fraction being known with a ±ε uncertainty. + // + // We pass this information to the rounding routine for adjustment. + + ok := adjustLastDigitFixed(d, uint64(rest)<= 0; i-- { + if d.d[i] != '0' { + d.nd = i + 1 + break + } + } + return true +} + +// adjustLastDigitFixed assumes d contains the representation of the integral part +// of some number, whose fractional part is num / (den << shift). The numerator +// num is only known up to an uncertainty of size ε, assumed to be less than +// (den << shift)/2. +// +// It will increase the last digit by one to account for correct rounding, typically +// when the fractional part is greater than 1/2, and will return false if ε is such +// that no correct answer can be given. +func adjustLastDigitFixed(d *decimalSlice, num, den uint64, shift uint, ε uint64) bool { + if num > den< den< den< (den< den<= 0; i-- { + if d.d[i] == '9' { + d.nd-- + } else { + break + } + } + if i < 0 { + d.d[0] = '1' + d.nd = 1 + d.dp++ + } else { + d.d[i]++ + } + return true + } + return false +} + +// ShortestDecimal stores in d the shortest decimal representation of f +// which belongs to the open interval (lower, upper), where f is supposed +// to lie. It returns false whenever the result is unsure. The implementation +// uses the Grisu3 algorithm. +func (f *extFloat) ShortestDecimal(d *decimalSlice, lower, upper *extFloat) bool { + if f.mant == 0 { + d.nd = 0 + d.dp = 0 + d.neg = f.neg + return true + } + if f.exp == 0 && *lower == *f && *lower == *upper { + // an exact integer. + var buf [24]byte + n := len(buf) - 1 + for v := f.mant; v > 0; { + v1 := v / 10 + v -= 10 * v1 + buf[n] = byte(v + '0') + n-- + v = v1 + } + nd := len(buf) - n - 1 + for i := 0; i < nd; i++ { + d.d[i] = buf[n+1+i] + } + d.nd, d.dp = nd, nd + for d.nd > 0 && d.d[d.nd-1] == '0' { + d.nd-- + } + if d.nd == 0 { + d.dp = 0 + } + d.neg = f.neg + return true + } + upper.Normalize() + // Uniformize exponents. + if f.exp > upper.exp { + f.mant <<= uint(f.exp - upper.exp) + f.exp = upper.exp + } + if lower.exp > upper.exp { + lower.mant <<= uint(lower.exp - upper.exp) + lower.exp = upper.exp + } + + exp10 := frexp10Many(lower, f, upper) + // Take a safety margin due to rounding in frexp10Many, but we lose precision. + upper.mant++ + lower.mant-- + + // The shortest representation of f is either rounded up or down, but + // in any case, it is a truncation of upper. + shift := uint(-upper.exp) + integer := uint32(upper.mant >> shift) + fraction := upper.mant - (uint64(integer) << shift) + + // How far we can go down from upper until the result is wrong. + allowance := upper.mant - lower.mant + // How far we should go to get a very precise result. + targetDiff := upper.mant - f.mant + + // Count integral digits: there are at most 10. + var integerDigits int + for i, pow := 0, uint64(1); i < 20; i++ { + if pow > uint64(integer) { + integerDigits = i + break + } + pow *= 10 + } + for i := 0; i < integerDigits; i++ { + pow := uint64pow10[integerDigits-i-1] + digit := integer / uint32(pow) + d.d[i] = byte(digit + '0') + integer -= digit * uint32(pow) + // evaluate whether we should stop. + if currentDiff := uint64(integer)<> shift) + d.d[d.nd] = byte(digit + '0') + d.nd++ + fraction -= uint64(digit) << shift + if fraction < allowance*multiplier { + // We are in the admissible range. Note that if allowance is about to + // overflow, that is, allowance > 2^64/10, the condition is automatically + // true due to the limited range of fraction. + return adjustLastDigit(d, + fraction, targetDiff*multiplier, allowance*multiplier, + 1< maxDiff-ulpBinary { + // we went too far + return false + } + if d.nd == 1 && d.d[0] == '0' { + // the number has actually reached zero. + d.nd = 0 + d.dp = 0 + } + return true +} diff --git a/vendor/github.com/pquerna/ffjson/fflib/v1/internal/ftoa.go b/vendor/github.com/pquerna/ffjson/fflib/v1/internal/ftoa.go new file mode 100644 index 000000000..253f83b45 --- /dev/null +++ b/vendor/github.com/pquerna/ffjson/fflib/v1/internal/ftoa.go @@ -0,0 +1,475 @@ +// Copyright 2009 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +// Binary to decimal floating point conversion. +// Algorithm: +// 1) store mantissa in multiprecision decimal +// 2) shift decimal by exponent +// 3) read digits out & format + +package internal + +import "math" + +// TODO: move elsewhere? +type floatInfo struct { + mantbits uint + expbits uint + bias int +} + +var float32info = floatInfo{23, 8, -127} +var float64info = floatInfo{52, 11, -1023} + +// FormatFloat converts the floating-point number f to a string, +// according to the format fmt and precision prec. It rounds the +// result assuming that the original was obtained from a floating-point +// value of bitSize bits (32 for float32, 64 for float64). +// +// The format fmt is one of +// 'b' (-ddddp±ddd, a binary exponent), +// 'e' (-d.dddde±dd, a decimal exponent), +// 'E' (-d.ddddE±dd, a decimal exponent), +// 'f' (-ddd.dddd, no exponent), +// 'g' ('e' for large exponents, 'f' otherwise), or +// 'G' ('E' for large exponents, 'f' otherwise). +// +// The precision prec controls the number of digits +// (excluding the exponent) printed by the 'e', 'E', 'f', 'g', and 'G' formats. +// For 'e', 'E', and 'f' it is the number of digits after the decimal point. +// For 'g' and 'G' it is the total number of digits. +// The special precision -1 uses the smallest number of digits +// necessary such that ParseFloat will return f exactly. +func formatFloat(f float64, fmt byte, prec, bitSize int) string { + return string(genericFtoa(make([]byte, 0, max(prec+4, 24)), f, fmt, prec, bitSize)) +} + +// AppendFloat appends the string form of the floating-point number f, +// as generated by FormatFloat, to dst and returns the extended buffer. +func appendFloat(dst []byte, f float64, fmt byte, prec int, bitSize int) []byte { + return genericFtoa(dst, f, fmt, prec, bitSize) +} + +func genericFtoa(dst []byte, val float64, fmt byte, prec, bitSize int) []byte { + var bits uint64 + var flt *floatInfo + switch bitSize { + case 32: + bits = uint64(math.Float32bits(float32(val))) + flt = &float32info + case 64: + bits = math.Float64bits(val) + flt = &float64info + default: + panic("strconv: illegal AppendFloat/FormatFloat bitSize") + } + + neg := bits>>(flt.expbits+flt.mantbits) != 0 + exp := int(bits>>flt.mantbits) & (1< digs.nd && digs.nd >= digs.dp { + eprec = digs.nd + } + // %e is used if the exponent from the conversion + // is less than -4 or greater than or equal to the precision. + // if precision was the shortest possible, use precision 6 for this decision. + if shortest { + eprec = 6 + } + exp := digs.dp - 1 + if exp < -4 || exp >= eprec { + if prec > digs.nd { + prec = digs.nd + } + return fmtE(dst, neg, digs, prec-1, fmt+'e'-'g') + } + if prec > digs.dp { + prec = digs.nd + } + return fmtF(dst, neg, digs, max(prec-digs.dp, 0)) + } + + // unknown format + return append(dst, '%', fmt) +} + +// Round d (= mant * 2^exp) to the shortest number of digits +// that will let the original floating point value be precisely +// reconstructed. Size is original floating point size (64 or 32). +func roundShortest(d *decimal, mant uint64, exp int, flt *floatInfo) { + // If mantissa is zero, the number is zero; stop now. + if mant == 0 { + d.nd = 0 + return + } + + // Compute upper and lower such that any decimal number + // between upper and lower (possibly inclusive) + // will round to the original floating point number. + + // We may see at once that the number is already shortest. + // + // Suppose d is not denormal, so that 2^exp <= d < 10^dp. + // The closest shorter number is at least 10^(dp-nd) away. + // The lower/upper bounds computed below are at distance + // at most 2^(exp-mantbits). + // + // So the number is already shortest if 10^(dp-nd) > 2^(exp-mantbits), + // or equivalently log2(10)*(dp-nd) > exp-mantbits. + // It is true if 332/100*(dp-nd) >= exp-mantbits (log2(10) > 3.32). + minexp := flt.bias + 1 // minimum possible exponent + if exp > minexp && 332*(d.dp-d.nd) >= 100*(exp-int(flt.mantbits)) { + // The number is already shortest. + return + } + + // d = mant << (exp - mantbits) + // Next highest floating point number is mant+1 << exp-mantbits. + // Our upper bound is halfway between, mant*2+1 << exp-mantbits-1. + upper := new(decimal) + upper.Assign(mant*2 + 1) + upper.Shift(exp - int(flt.mantbits) - 1) + + // d = mant << (exp - mantbits) + // Next lowest floating point number is mant-1 << exp-mantbits, + // unless mant-1 drops the significant bit and exp is not the minimum exp, + // in which case the next lowest is mant*2-1 << exp-mantbits-1. + // Either way, call it mantlo << explo-mantbits. + // Our lower bound is halfway between, mantlo*2+1 << explo-mantbits-1. + var mantlo uint64 + var explo int + if mant > 1< 0 { + dst = append(dst, '.') + i := 1 + m := d.nd + prec + 1 - max(d.nd, prec+1) + for i < m { + dst = append(dst, d.d[i]) + i++ + } + for i <= prec { + dst = append(dst, '0') + i++ + } + } + + // e± + dst = append(dst, fmt) + exp := d.dp - 1 + if d.nd == 0 { // special case: 0 has exponent 0 + exp = 0 + } + if exp < 0 { + ch = '-' + exp = -exp + } else { + ch = '+' + } + dst = append(dst, ch) + + // dddd + var buf [3]byte + i := len(buf) + for exp >= 10 { + i-- + buf[i] = byte(exp%10 + '0') + exp /= 10 + } + // exp < 10 + i-- + buf[i] = byte(exp + '0') + + switch i { + case 0: + dst = append(dst, buf[0], buf[1], buf[2]) + case 1: + dst = append(dst, buf[1], buf[2]) + case 2: + // leading zeroes + dst = append(dst, '0', buf[2]) + } + return dst +} + +// %f: -ddddddd.ddddd +func fmtF(dst []byte, neg bool, d decimalSlice, prec int) []byte { + // sign + if neg { + dst = append(dst, '-') + } + + // integer, padded with zeros as needed. + if d.dp > 0 { + var i int + for i = 0; i < d.dp && i < d.nd; i++ { + dst = append(dst, d.d[i]) + } + for ; i < d.dp; i++ { + dst = append(dst, '0') + } + } else { + dst = append(dst, '0') + } + + // fraction + if prec > 0 { + dst = append(dst, '.') + for i := 0; i < prec; i++ { + ch := byte('0') + if j := d.dp + i; 0 <= j && j < d.nd { + ch = d.d[j] + } + dst = append(dst, ch) + } + } + + return dst +} + +// %b: -ddddddddp+ddd +func fmtB(dst []byte, neg bool, mant uint64, exp int, flt *floatInfo) []byte { + var buf [50]byte + w := len(buf) + exp -= int(flt.mantbits) + esign := byte('+') + if exp < 0 { + esign = '-' + exp = -exp + } + n := 0 + for exp > 0 || n < 1 { + n++ + w-- + buf[w] = byte(exp%10 + '0') + exp /= 10 + } + w-- + buf[w] = esign + w-- + buf[w] = 'p' + n = 0 + for mant > 0 || n < 1 { + n++ + w-- + buf[w] = byte(mant%10 + '0') + mant /= 10 + } + if neg { + w-- + buf[w] = '-' + } + return append(dst, buf[w:]...) +} + +func max(a, b int) int { + if a > b { + return a + } + return b +} diff --git a/vendor/github.com/pquerna/ffjson/fflib/v1/iota.go b/vendor/github.com/pquerna/ffjson/fflib/v1/iota.go new file mode 100644 index 000000000..3e50f0c41 --- /dev/null +++ b/vendor/github.com/pquerna/ffjson/fflib/v1/iota.go @@ -0,0 +1,161 @@ +/** + * Copyright 2014 Paul Querna + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + */ + +/* Portions of this file are on Go stdlib's strconv/iota.go */ +// Copyright 2009 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +package v1 + +import ( + "io" +) + +const ( + digits = "0123456789abcdefghijklmnopqrstuvwxyz" + digits01 = "0123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789" + digits10 = "0000000000111111111122222222223333333333444444444455555555556666666666777777777788888888889999999999" +) + +var shifts = [len(digits) + 1]uint{ + 1 << 1: 1, + 1 << 2: 2, + 1 << 3: 3, + 1 << 4: 4, + 1 << 5: 5, +} + +var smallNumbers = [][]byte{ + []byte("0"), + []byte("1"), + []byte("2"), + []byte("3"), + []byte("4"), + []byte("5"), + []byte("6"), + []byte("7"), + []byte("8"), + []byte("9"), + []byte("10"), +} + +type FormatBitsWriter interface { + io.Writer + io.ByteWriter +} + +type FormatBitsScratch struct{} + +// +// DEPRECIATED: `scratch` is no longer used, FormatBits2 is available. +// +// FormatBits computes the string representation of u in the given base. +// If neg is set, u is treated as negative int64 value. If append_ is +// set, the string is appended to dst and the resulting byte slice is +// returned as the first result value; otherwise the string is returned +// as the second result value. +// +func FormatBits(scratch *FormatBitsScratch, dst FormatBitsWriter, u uint64, base int, neg bool) { + FormatBits2(dst, u, base, neg) +} + +// FormatBits2 computes the string representation of u in the given base. +// If neg is set, u is treated as negative int64 value. If append_ is +// set, the string is appended to dst and the resulting byte slice is +// returned as the first result value; otherwise the string is returned +// as the second result value. +// +func FormatBits2(dst FormatBitsWriter, u uint64, base int, neg bool) { + if base < 2 || base > len(digits) { + panic("strconv: illegal AppendInt/FormatInt base") + } + // fast path for small common numbers + if u <= 10 { + if neg { + dst.WriteByte('-') + } + dst.Write(smallNumbers[u]) + return + } + + // 2 <= base && base <= len(digits) + + var a = makeSlice(65) + // var a [64 + 1]byte // +1 for sign of 64bit value in base 2 + i := len(a) + + if neg { + u = -u + } + + // convert bits + if base == 10 { + // common case: use constants for / and % because + // the compiler can optimize it into a multiply+shift, + // and unroll loop + for u >= 100 { + i -= 2 + q := u / 100 + j := uintptr(u - q*100) + a[i+1] = digits01[j] + a[i+0] = digits10[j] + u = q + } + if u >= 10 { + i-- + q := u / 10 + a[i] = digits[uintptr(u-q*10)] + u = q + } + + } else if s := shifts[base]; s > 0 { + // base is power of 2: use shifts and masks instead of / and % + b := uint64(base) + m := uintptr(b) - 1 // == 1<= b { + i-- + a[i] = digits[uintptr(u)&m] + u >>= s + } + + } else { + // general case + b := uint64(base) + for u >= b { + i-- + a[i] = digits[uintptr(u%b)] + u /= b + } + } + + // u < base + i-- + a[i] = digits[uintptr(u)] + + // add sign, if any + if neg { + i-- + a[i] = '-' + } + + dst.Write(a[i:]) + + Pool(a) + + return +} diff --git a/vendor/github.com/pquerna/ffjson/fflib/v1/jsonstring.go b/vendor/github.com/pquerna/ffjson/fflib/v1/jsonstring.go new file mode 100644 index 000000000..513b45d57 --- /dev/null +++ b/vendor/github.com/pquerna/ffjson/fflib/v1/jsonstring.go @@ -0,0 +1,512 @@ +/** + * Copyright 2014 Paul Querna + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + */ + +/* Portions of this file are on Go stdlib's encoding/json/encode.go */ +// Copyright 2010 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +package v1 + +import ( + "io" + "unicode/utf8" + "strconv" + "unicode/utf16" + "unicode" +) + +const hex = "0123456789abcdef" + +type JsonStringWriter interface { + io.Writer + io.ByteWriter + stringWriter +} + +func WriteJsonString(buf JsonStringWriter, s string) { + WriteJson(buf, []byte(s)) +} + +/** + * Function ported from encoding/json: func (e *encodeState) string(s string) (int, error) + */ +func WriteJson(buf JsonStringWriter, s []byte) { + buf.WriteByte('"') + start := 0 + for i := 0; i < len(s); { + if b := s[i]; b < utf8.RuneSelf { + /* + if 0x20 <= b && b != '\\' && b != '"' && b != '<' && b != '>' && b != '&' { + i++ + continue + } + */ + if lt[b] == true { + i++ + continue + } + + if start < i { + buf.Write(s[start:i]) + } + switch b { + case '\\', '"': + buf.WriteByte('\\') + buf.WriteByte(b) + case '\n': + buf.WriteByte('\\') + buf.WriteByte('n') + case '\r': + buf.WriteByte('\\') + buf.WriteByte('r') + default: + // This encodes bytes < 0x20 except for \n and \r, + // as well as < and >. The latter are escaped because they + // can lead to security holes when user-controlled strings + // are rendered into JSON and served to some browsers. + buf.WriteString(`\u00`) + buf.WriteByte(hex[b>>4]) + buf.WriteByte(hex[b&0xF]) + } + i++ + start = i + continue + } + c, size := utf8.DecodeRune(s[i:]) + if c == utf8.RuneError && size == 1 { + if start < i { + buf.Write(s[start:i]) + } + buf.WriteString(`\ufffd`) + i += size + start = i + continue + } + // U+2028 is LINE SEPARATOR. + // U+2029 is PARAGRAPH SEPARATOR. + // They are both technically valid characters in JSON strings, + // but don't work in JSONP, which has to be evaluated as JavaScript, + // and can lead to security holes there. It is valid JSON to + // escape them, so we do so unconditionally. + // See http://timelessrepo.com/json-isnt-a-javascript-subset for discussion. + if c == '\u2028' || c == '\u2029' { + if start < i { + buf.Write(s[start:i]) + } + buf.WriteString(`\u202`) + buf.WriteByte(hex[c&0xF]) + i += size + start = i + continue + } + i += size + } + if start < len(s) { + buf.Write(s[start:]) + } + buf.WriteByte('"') +} + +// UnquoteBytes will decode []byte containing json string to go string +// ported from encoding/json/decode.go +func UnquoteBytes(s []byte) (t []byte, ok bool) { + if len(s) < 2 || s[0] != '"' || s[len(s)-1] != '"' { + return + } + s = s[1 : len(s)-1] + + // Check for unusual characters. If there are none, + // then no unquoting is needed, so return a slice of the + // original bytes. + r := 0 + for r < len(s) { + c := s[r] + if c == '\\' || c == '"' || c < ' ' { + break + } + if c < utf8.RuneSelf { + r++ + continue + } + rr, size := utf8.DecodeRune(s[r:]) + if rr == utf8.RuneError && size == 1 { + break + } + r += size + } + if r == len(s) { + return s, true + } + + b := make([]byte, len(s)+2*utf8.UTFMax) + w := copy(b, s[0:r]) + for r < len(s) { + // Out of room? Can only happen if s is full of + // malformed UTF-8 and we're replacing each + // byte with RuneError. + if w >= len(b)-2*utf8.UTFMax { + nb := make([]byte, (len(b)+utf8.UTFMax)*2) + copy(nb, b[0:w]) + b = nb + } + switch c := s[r]; { + case c == '\\': + r++ + if r >= len(s) { + return + } + switch s[r] { + default: + return + case '"', '\\', '/', '\'': + b[w] = s[r] + r++ + w++ + case 'b': + b[w] = '\b' + r++ + w++ + case 'f': + b[w] = '\f' + r++ + w++ + case 'n': + b[w] = '\n' + r++ + w++ + case 'r': + b[w] = '\r' + r++ + w++ + case 't': + b[w] = '\t' + r++ + w++ + case 'u': + r-- + rr := getu4(s[r:]) + if rr < 0 { + return + } + r += 6 + if utf16.IsSurrogate(rr) { + rr1 := getu4(s[r:]) + if dec := utf16.DecodeRune(rr, rr1); dec != unicode.ReplacementChar { + // A valid pair; consume. + r += 6 + w += utf8.EncodeRune(b[w:], dec) + break + } + // Invalid surrogate; fall back to replacement rune. + rr = unicode.ReplacementChar + } + w += utf8.EncodeRune(b[w:], rr) + } + + // Quote, control characters are invalid. + case c == '"', c < ' ': + return + + // ASCII + case c < utf8.RuneSelf: + b[w] = c + r++ + w++ + + // Coerce to well-formed UTF-8. + default: + rr, size := utf8.DecodeRune(s[r:]) + r += size + w += utf8.EncodeRune(b[w:], rr) + } + } + return b[0:w], true +} + +// getu4 decodes \uXXXX from the beginning of s, returning the hex value, +// or it returns -1. +func getu4(s []byte) rune { + if len(s) < 6 || s[0] != '\\' || s[1] != 'u' { + return -1 + } + r, err := strconv.ParseUint(string(s[2:6]), 16, 64) + if err != nil { + return -1 + } + return rune(r) +} + +// TODO(pquerna): consider combining wibth the normal byte mask. +var lt [256]bool = [256]bool{ + false, /* 0 */ + false, /* 1 */ + false, /* 2 */ + false, /* 3 */ + false, /* 4 */ + false, /* 5 */ + false, /* 6 */ + false, /* 7 */ + false, /* 8 */ + false, /* 9 */ + false, /* 10 */ + false, /* 11 */ + false, /* 12 */ + false, /* 13 */ + false, /* 14 */ + false, /* 15 */ + false, /* 16 */ + false, /* 17 */ + false, /* 18 */ + false, /* 19 */ + false, /* 20 */ + false, /* 21 */ + false, /* 22 */ + false, /* 23 */ + false, /* 24 */ + false, /* 25 */ + false, /* 26 */ + false, /* 27 */ + false, /* 28 */ + false, /* 29 */ + false, /* 30 */ + false, /* 31 */ + true, /* 32 */ + true, /* 33 */ + false, /* 34 */ + true, /* 35 */ + true, /* 36 */ + true, /* 37 */ + false, /* 38 */ + true, /* 39 */ + true, /* 40 */ + true, /* 41 */ + true, /* 42 */ + true, /* 43 */ + true, /* 44 */ + true, /* 45 */ + true, /* 46 */ + true, /* 47 */ + true, /* 48 */ + true, /* 49 */ + true, /* 50 */ + true, /* 51 */ + true, /* 52 */ + true, /* 53 */ + true, /* 54 */ + true, /* 55 */ + true, /* 56 */ + true, /* 57 */ + true, /* 58 */ + true, /* 59 */ + false, /* 60 */ + true, /* 61 */ + false, /* 62 */ + true, /* 63 */ + true, /* 64 */ + true, /* 65 */ + true, /* 66 */ + true, /* 67 */ + true, /* 68 */ + true, /* 69 */ + true, /* 70 */ + true, /* 71 */ + true, /* 72 */ + true, /* 73 */ + true, /* 74 */ + true, /* 75 */ + true, /* 76 */ + true, /* 77 */ + true, /* 78 */ + true, /* 79 */ + true, /* 80 */ + true, /* 81 */ + true, /* 82 */ + true, /* 83 */ + true, /* 84 */ + true, /* 85 */ + true, /* 86 */ + true, /* 87 */ + true, /* 88 */ + true, /* 89 */ + true, /* 90 */ + true, /* 91 */ + false, /* 92 */ + true, /* 93 */ + true, /* 94 */ + true, /* 95 */ + true, /* 96 */ + true, /* 97 */ + true, /* 98 */ + true, /* 99 */ + true, /* 100 */ + true, /* 101 */ + true, /* 102 */ + true, /* 103 */ + true, /* 104 */ + true, /* 105 */ + true, /* 106 */ + true, /* 107 */ + true, /* 108 */ + true, /* 109 */ + true, /* 110 */ + true, /* 111 */ + true, /* 112 */ + true, /* 113 */ + true, /* 114 */ + true, /* 115 */ + true, /* 116 */ + true, /* 117 */ + true, /* 118 */ + true, /* 119 */ + true, /* 120 */ + true, /* 121 */ + true, /* 122 */ + true, /* 123 */ + true, /* 124 */ + true, /* 125 */ + true, /* 126 */ + true, /* 127 */ + true, /* 128 */ + true, /* 129 */ + true, /* 130 */ + true, /* 131 */ + true, /* 132 */ + true, /* 133 */ + true, /* 134 */ + true, /* 135 */ + true, /* 136 */ + true, /* 137 */ + true, /* 138 */ + true, /* 139 */ + true, /* 140 */ + true, /* 141 */ + true, /* 142 */ + true, /* 143 */ + true, /* 144 */ + true, /* 145 */ + true, /* 146 */ + true, /* 147 */ + true, /* 148 */ + true, /* 149 */ + true, /* 150 */ + true, /* 151 */ + true, /* 152 */ + true, /* 153 */ + true, /* 154 */ + true, /* 155 */ + true, /* 156 */ + true, /* 157 */ + true, /* 158 */ + true, /* 159 */ + true, /* 160 */ + true, /* 161 */ + true, /* 162 */ + true, /* 163 */ + true, /* 164 */ + true, /* 165 */ + true, /* 166 */ + true, /* 167 */ + true, /* 168 */ + true, /* 169 */ + true, /* 170 */ + true, /* 171 */ + true, /* 172 */ + true, /* 173 */ + true, /* 174 */ + true, /* 175 */ + true, /* 176 */ + true, /* 177 */ + true, /* 178 */ + true, /* 179 */ + true, /* 180 */ + true, /* 181 */ + true, /* 182 */ + true, /* 183 */ + true, /* 184 */ + true, /* 185 */ + true, /* 186 */ + true, /* 187 */ + true, /* 188 */ + true, /* 189 */ + true, /* 190 */ + true, /* 191 */ + true, /* 192 */ + true, /* 193 */ + true, /* 194 */ + true, /* 195 */ + true, /* 196 */ + true, /* 197 */ + true, /* 198 */ + true, /* 199 */ + true, /* 200 */ + true, /* 201 */ + true, /* 202 */ + true, /* 203 */ + true, /* 204 */ + true, /* 205 */ + true, /* 206 */ + true, /* 207 */ + true, /* 208 */ + true, /* 209 */ + true, /* 210 */ + true, /* 211 */ + true, /* 212 */ + true, /* 213 */ + true, /* 214 */ + true, /* 215 */ + true, /* 216 */ + true, /* 217 */ + true, /* 218 */ + true, /* 219 */ + true, /* 220 */ + true, /* 221 */ + true, /* 222 */ + true, /* 223 */ + true, /* 224 */ + true, /* 225 */ + true, /* 226 */ + true, /* 227 */ + true, /* 228 */ + true, /* 229 */ + true, /* 230 */ + true, /* 231 */ + true, /* 232 */ + true, /* 233 */ + true, /* 234 */ + true, /* 235 */ + true, /* 236 */ + true, /* 237 */ + true, /* 238 */ + true, /* 239 */ + true, /* 240 */ + true, /* 241 */ + true, /* 242 */ + true, /* 243 */ + true, /* 244 */ + true, /* 245 */ + true, /* 246 */ + true, /* 247 */ + true, /* 248 */ + true, /* 249 */ + true, /* 250 */ + true, /* 251 */ + true, /* 252 */ + true, /* 253 */ + true, /* 254 */ + true, /* 255 */ +} diff --git a/vendor/github.com/pquerna/ffjson/fflib/v1/lexer.go b/vendor/github.com/pquerna/ffjson/fflib/v1/lexer.go new file mode 100644 index 000000000..8ffd54be5 --- /dev/null +++ b/vendor/github.com/pquerna/ffjson/fflib/v1/lexer.go @@ -0,0 +1,937 @@ +/** + * Copyright 2014 Paul Querna + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + */ + +/* Portions of this file are on derived from yajl: */ +/* + * Copyright (c) 2007-2014, Lloyd Hilaiel + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +package v1 + +import ( + "errors" + "fmt" + "io" +) + +type FFParseState int + +const ( + FFParse_map_start FFParseState = iota + FFParse_want_key + FFParse_want_colon + FFParse_want_value + FFParse_after_value +) + +type FFTok int + +const ( + FFTok_init FFTok = iota + FFTok_bool FFTok = iota + FFTok_colon FFTok = iota + FFTok_comma FFTok = iota + FFTok_eof FFTok = iota + FFTok_error FFTok = iota + FFTok_left_brace FFTok = iota + FFTok_left_bracket FFTok = iota + FFTok_null FFTok = iota + FFTok_right_brace FFTok = iota + FFTok_right_bracket FFTok = iota + + /* we differentiate between integers and doubles to allow the + * parser to interpret the number without re-scanning */ + FFTok_integer FFTok = iota + FFTok_double FFTok = iota + + FFTok_string FFTok = iota + + /* comment tokens are not currently returned to the parser, ever */ + FFTok_comment FFTok = iota +) + +type FFErr int + +const ( + FFErr_e_ok FFErr = iota + FFErr_io FFErr = iota + FFErr_string_invalid_utf8 FFErr = iota + FFErr_string_invalid_escaped_char FFErr = iota + FFErr_string_invalid_json_char FFErr = iota + FFErr_string_invalid_hex_char FFErr = iota + FFErr_invalid_char FFErr = iota + FFErr_invalid_string FFErr = iota + FFErr_missing_integer_after_decimal FFErr = iota + FFErr_missing_integer_after_exponent FFErr = iota + FFErr_missing_integer_after_minus FFErr = iota + FFErr_unallowed_comment FFErr = iota + FFErr_incomplete_comment FFErr = iota + FFErr_unexpected_token_type FFErr = iota // TODO: improve this error +) + +type FFLexer struct { + reader *ffReader + Output DecodingBuffer + Token FFTok + Error FFErr + BigError error + // TODO: convert all of this to an interface + lastCurrentChar int + captureAll bool + buf Buffer +} + +func NewFFLexer(input []byte) *FFLexer { + fl := &FFLexer{ + Token: FFTok_init, + Error: FFErr_e_ok, + reader: newffReader(input), + Output: &Buffer{}, + } + // TODO: guess size? + //fl.Output.Grow(64) + return fl +} + +type LexerError struct { + offset int + line int + char int + err error +} + +// Reset the Lexer and add new input. +func (ffl *FFLexer) Reset(input []byte) { + ffl.Token = FFTok_init + ffl.Error = FFErr_e_ok + ffl.BigError = nil + ffl.reader.Reset(input) + ffl.lastCurrentChar = 0 + ffl.Output.Reset() +} + +func (le *LexerError) Error() string { + return fmt.Sprintf(`ffjson error: (%T)%s offset=%d line=%d char=%d`, + le.err, le.err.Error(), + le.offset, le.line, le.char) +} + +func (ffl *FFLexer) WrapErr(err error) error { + line, char := ffl.reader.PosWithLine() + // TOOD: calcualte lines/characters based on offset + return &LexerError{ + offset: ffl.reader.Pos(), + line: line, + char: char, + err: err, + } +} + +func (ffl *FFLexer) scanReadByte() (byte, error) { + var c byte + var err error + if ffl.captureAll { + c, err = ffl.reader.ReadByte() + } else { + c, err = ffl.reader.ReadByteNoWS() + } + + if err != nil { + ffl.Error = FFErr_io + ffl.BigError = err + return 0, err + } + + return c, nil +} + +func (ffl *FFLexer) readByte() (byte, error) { + + c, err := ffl.reader.ReadByte() + if err != nil { + ffl.Error = FFErr_io + ffl.BigError = err + return 0, err + } + + return c, nil +} + +func (ffl *FFLexer) unreadByte() { + ffl.reader.UnreadByte() +} + +func (ffl *FFLexer) wantBytes(want []byte, iftrue FFTok) FFTok { + startPos := ffl.reader.Pos() + for _, b := range want { + c, err := ffl.readByte() + + if err != nil { + return FFTok_error + } + + if c != b { + ffl.unreadByte() + // fmt.Printf("wanted bytes: %s\n", string(want)) + // TODO(pquerna): thsi is a bad error message + ffl.Error = FFErr_invalid_string + return FFTok_error + } + } + + endPos := ffl.reader.Pos() + ffl.Output.Write(ffl.reader.Slice(startPos, endPos)) + return iftrue +} + +func (ffl *FFLexer) lexComment() FFTok { + c, err := ffl.readByte() + if err != nil { + return FFTok_error + } + + if c == '/' { + // a // comment, scan until line ends. + for { + c, err := ffl.readByte() + if err != nil { + return FFTok_error + } + + if c == '\n' { + return FFTok_comment + } + } + } else if c == '*' { + // a /* */ comment, scan */ + for { + c, err := ffl.readByte() + if err != nil { + return FFTok_error + } + + if c == '*' { + c, err := ffl.readByte() + + if err != nil { + return FFTok_error + } + + if c == '/' { + return FFTok_comment + } + + ffl.Error = FFErr_incomplete_comment + return FFTok_error + } + } + } else { + ffl.Error = FFErr_incomplete_comment + return FFTok_error + } +} + +func (ffl *FFLexer) lexString() FFTok { + if ffl.captureAll { + ffl.buf.Reset() + err := ffl.reader.SliceString(&ffl.buf) + + if err != nil { + ffl.BigError = err + return FFTok_error + } + + WriteJson(ffl.Output, ffl.buf.Bytes()) + + return FFTok_string + } else { + err := ffl.reader.SliceString(ffl.Output) + + if err != nil { + ffl.BigError = err + return FFTok_error + } + + return FFTok_string + } +} + +func (ffl *FFLexer) lexNumber() FFTok { + var numRead int = 0 + tok := FFTok_integer + startPos := ffl.reader.Pos() + + c, err := ffl.readByte() + if err != nil { + return FFTok_error + } + + /* optional leading minus */ + if c == '-' { + c, err = ffl.readByte() + if err != nil { + return FFTok_error + } + } + + /* a single zero, or a series of integers */ + if c == '0' { + c, err = ffl.readByte() + if err != nil { + return FFTok_error + } + } else if c >= '1' && c <= '9' { + for c >= '0' && c <= '9' { + c, err = ffl.readByte() + if err != nil { + return FFTok_error + } + } + } else { + ffl.unreadByte() + ffl.Error = FFErr_missing_integer_after_minus + return FFTok_error + } + + if c == '.' { + numRead = 0 + c, err = ffl.readByte() + if err != nil { + return FFTok_error + } + + for c >= '0' && c <= '9' { + numRead++ + c, err = ffl.readByte() + if err != nil { + return FFTok_error + } + } + + if numRead == 0 { + ffl.unreadByte() + + ffl.Error = FFErr_missing_integer_after_decimal + return FFTok_error + } + + tok = FFTok_double + } + + /* optional exponent (indicates this is floating point) */ + if c == 'e' || c == 'E' { + numRead = 0 + c, err = ffl.readByte() + if err != nil { + return FFTok_error + } + + /* optional sign */ + if c == '+' || c == '-' { + c, err = ffl.readByte() + if err != nil { + return FFTok_error + } + } + + for c >= '0' && c <= '9' { + numRead++ + c, err = ffl.readByte() + if err != nil { + return FFTok_error + } + } + + if numRead == 0 { + ffl.Error = FFErr_missing_integer_after_exponent + return FFTok_error + } + + tok = FFTok_double + } + + ffl.unreadByte() + + endPos := ffl.reader.Pos() + ffl.Output.Write(ffl.reader.Slice(startPos, endPos)) + return tok +} + +var true_bytes = []byte{'r', 'u', 'e'} +var false_bytes = []byte{'a', 'l', 's', 'e'} +var null_bytes = []byte{'u', 'l', 'l'} + +func (ffl *FFLexer) Scan() FFTok { + tok := FFTok_error + if ffl.captureAll == false { + ffl.Output.Reset() + } + ffl.Token = FFTok_init + + for { + c, err := ffl.scanReadByte() + if err != nil { + if err == io.EOF { + return FFTok_eof + } else { + return FFTok_error + } + } + + switch c { + case '{': + tok = FFTok_left_bracket + if ffl.captureAll { + ffl.Output.WriteByte('{') + } + goto lexed + case '}': + tok = FFTok_right_bracket + if ffl.captureAll { + ffl.Output.WriteByte('}') + } + goto lexed + case '[': + tok = FFTok_left_brace + if ffl.captureAll { + ffl.Output.WriteByte('[') + } + goto lexed + case ']': + tok = FFTok_right_brace + if ffl.captureAll { + ffl.Output.WriteByte(']') + } + goto lexed + case ',': + tok = FFTok_comma + if ffl.captureAll { + ffl.Output.WriteByte(',') + } + goto lexed + case ':': + tok = FFTok_colon + if ffl.captureAll { + ffl.Output.WriteByte(':') + } + goto lexed + case '\t', '\n', '\v', '\f', '\r', ' ': + if ffl.captureAll { + ffl.Output.WriteByte(c) + } + break + case 't': + ffl.Output.WriteByte('t') + tok = ffl.wantBytes(true_bytes, FFTok_bool) + goto lexed + case 'f': + ffl.Output.WriteByte('f') + tok = ffl.wantBytes(false_bytes, FFTok_bool) + goto lexed + case 'n': + ffl.Output.WriteByte('n') + tok = ffl.wantBytes(null_bytes, FFTok_null) + goto lexed + case '"': + tok = ffl.lexString() + goto lexed + case '-', '0', '1', '2', '3', '4', '5', '6', '7', '8', '9': + ffl.unreadByte() + tok = ffl.lexNumber() + goto lexed + case '/': + tok = ffl.lexComment() + goto lexed + default: + tok = FFTok_error + ffl.Error = FFErr_invalid_char + } + } + +lexed: + ffl.Token = tok + return tok +} + +func (ffl *FFLexer) scanField(start FFTok, capture bool) ([]byte, error) { + switch start { + case FFTok_left_brace, + FFTok_left_bracket: + { + end := FFTok_right_brace + if start == FFTok_left_bracket { + end = FFTok_right_bracket + if capture { + ffl.Output.WriteByte('{') + } + } else { + if capture { + ffl.Output.WriteByte('[') + } + } + + depth := 1 + if capture { + ffl.captureAll = true + } + // TODO: work. + scanloop: + for { + tok := ffl.Scan() + //fmt.Printf("capture-token: %v end: %v depth: %v\n", tok, end, depth) + switch tok { + case FFTok_eof: + return nil, errors.New("ffjson: unexpected EOF") + case FFTok_error: + if ffl.BigError != nil { + return nil, ffl.BigError + } + return nil, ffl.Error.ToError() + case end: + depth-- + if depth == 0 { + break scanloop + } + case start: + depth++ + } + } + + if capture { + ffl.captureAll = false + } + + if capture { + return ffl.Output.Bytes(), nil + } else { + return nil, nil + } + } + case FFTok_bool, + FFTok_integer, + FFTok_null, + FFTok_double: + // simple value, return it. + if capture { + return ffl.Output.Bytes(), nil + } else { + return nil, nil + } + + case FFTok_string: + //TODO(pquerna): so, other users expect this to be a quoted string :( + if capture { + ffl.buf.Reset() + WriteJson(&ffl.buf, ffl.Output.Bytes()) + return ffl.buf.Bytes(), nil + } else { + return nil, nil + } + } + + return nil, fmt.Errorf("ffjson: invalid capture type: %v", start) +} + +// Captures an entire field value, including recursive objects, +// and converts them to a []byte suitable to pass to a sub-object's +// UnmarshalJSON +func (ffl *FFLexer) CaptureField(start FFTok) ([]byte, error) { + return ffl.scanField(start, true) +} + +func (ffl *FFLexer) SkipField(start FFTok) error { + _, err := ffl.scanField(start, false) + return err +} + +// TODO(pquerna): return line number and offset. +func (err FFErr) ToError() error { + switch err { + case FFErr_e_ok: + return nil + case FFErr_io: + return errors.New("ffjson: IO error") + case FFErr_string_invalid_utf8: + return errors.New("ffjson: string with invalid UTF-8 sequence") + case FFErr_string_invalid_escaped_char: + return errors.New("ffjson: string with invalid escaped character") + case FFErr_string_invalid_json_char: + return errors.New("ffjson: string with invalid JSON character") + case FFErr_string_invalid_hex_char: + return errors.New("ffjson: string with invalid hex character") + case FFErr_invalid_char: + return errors.New("ffjson: invalid character") + case FFErr_invalid_string: + return errors.New("ffjson: invalid string") + case FFErr_missing_integer_after_decimal: + return errors.New("ffjson: missing integer after decimal") + case FFErr_missing_integer_after_exponent: + return errors.New("ffjson: missing integer after exponent") + case FFErr_missing_integer_after_minus: + return errors.New("ffjson: missing integer after minus") + case FFErr_unallowed_comment: + return errors.New("ffjson: unallowed comment") + case FFErr_incomplete_comment: + return errors.New("ffjson: incomplete comment") + case FFErr_unexpected_token_type: + return errors.New("ffjson: unexpected token sequence") + } + + panic(fmt.Sprintf("unknown error type: %v ", err)) +} + +func (state FFParseState) String() string { + switch state { + case FFParse_map_start: + return "map:start" + case FFParse_want_key: + return "want_key" + case FFParse_want_colon: + return "want_colon" + case FFParse_want_value: + return "want_value" + case FFParse_after_value: + return "after_value" + } + + panic(fmt.Sprintf("unknown parse state: %d", int(state))) +} + +func (tok FFTok) String() string { + switch tok { + case FFTok_init: + return "tok:init" + case FFTok_bool: + return "tok:bool" + case FFTok_colon: + return "tok:colon" + case FFTok_comma: + return "tok:comma" + case FFTok_eof: + return "tok:eof" + case FFTok_error: + return "tok:error" + case FFTok_left_brace: + return "tok:left_brace" + case FFTok_left_bracket: + return "tok:left_bracket" + case FFTok_null: + return "tok:null" + case FFTok_right_brace: + return "tok:right_brace" + case FFTok_right_bracket: + return "tok:right_bracket" + case FFTok_integer: + return "tok:integer" + case FFTok_double: + return "tok:double" + case FFTok_string: + return "tok:string" + case FFTok_comment: + return "comment" + } + + panic(fmt.Sprintf("unknown token: %d", int(tok))) +} + +/* a lookup table which lets us quickly determine three things: + * cVEC - valid escaped control char + * note. the solidus '/' may be escaped or not. + * cIJC - invalid json char + * cVHC - valid hex char + * cNFP - needs further processing (from a string scanning perspective) + * cNUC - needs utf8 checking when enabled (from a string scanning perspective) + */ + +const ( + cVEC int8 = 0x01 + cIJC int8 = 0x02 + cVHC int8 = 0x04 + cNFP int8 = 0x08 + cNUC int8 = 0x10 +) + +var byteLookupTable [256]int8 = [256]int8{ + cIJC, /* 0 */ + cIJC, /* 1 */ + cIJC, /* 2 */ + cIJC, /* 3 */ + cIJC, /* 4 */ + cIJC, /* 5 */ + cIJC, /* 6 */ + cIJC, /* 7 */ + cIJC, /* 8 */ + cIJC, /* 9 */ + cIJC, /* 10 */ + cIJC, /* 11 */ + cIJC, /* 12 */ + cIJC, /* 13 */ + cIJC, /* 14 */ + cIJC, /* 15 */ + cIJC, /* 16 */ + cIJC, /* 17 */ + cIJC, /* 18 */ + cIJC, /* 19 */ + cIJC, /* 20 */ + cIJC, /* 21 */ + cIJC, /* 22 */ + cIJC, /* 23 */ + cIJC, /* 24 */ + cIJC, /* 25 */ + cIJC, /* 26 */ + cIJC, /* 27 */ + cIJC, /* 28 */ + cIJC, /* 29 */ + cIJC, /* 30 */ + cIJC, /* 31 */ + 0, /* 32 */ + 0, /* 33 */ + cVEC | cIJC | cNFP, /* 34 */ + 0, /* 35 */ + 0, /* 36 */ + 0, /* 37 */ + 0, /* 38 */ + 0, /* 39 */ + 0, /* 40 */ + 0, /* 41 */ + 0, /* 42 */ + 0, /* 43 */ + 0, /* 44 */ + 0, /* 45 */ + 0, /* 46 */ + cVEC, /* 47 */ + cVHC, /* 48 */ + cVHC, /* 49 */ + cVHC, /* 50 */ + cVHC, /* 51 */ + cVHC, /* 52 */ + cVHC, /* 53 */ + cVHC, /* 54 */ + cVHC, /* 55 */ + cVHC, /* 56 */ + cVHC, /* 57 */ + 0, /* 58 */ + 0, /* 59 */ + 0, /* 60 */ + 0, /* 61 */ + 0, /* 62 */ + 0, /* 63 */ + 0, /* 64 */ + cVHC, /* 65 */ + cVHC, /* 66 */ + cVHC, /* 67 */ + cVHC, /* 68 */ + cVHC, /* 69 */ + cVHC, /* 70 */ + 0, /* 71 */ + 0, /* 72 */ + 0, /* 73 */ + 0, /* 74 */ + 0, /* 75 */ + 0, /* 76 */ + 0, /* 77 */ + 0, /* 78 */ + 0, /* 79 */ + 0, /* 80 */ + 0, /* 81 */ + 0, /* 82 */ + 0, /* 83 */ + 0, /* 84 */ + 0, /* 85 */ + 0, /* 86 */ + 0, /* 87 */ + 0, /* 88 */ + 0, /* 89 */ + 0, /* 90 */ + 0, /* 91 */ + cVEC | cIJC | cNFP, /* 92 */ + 0, /* 93 */ + 0, /* 94 */ + 0, /* 95 */ + 0, /* 96 */ + cVHC, /* 97 */ + cVEC | cVHC, /* 98 */ + cVHC, /* 99 */ + cVHC, /* 100 */ + cVHC, /* 101 */ + cVEC | cVHC, /* 102 */ + 0, /* 103 */ + 0, /* 104 */ + 0, /* 105 */ + 0, /* 106 */ + 0, /* 107 */ + 0, /* 108 */ + 0, /* 109 */ + cVEC, /* 110 */ + 0, /* 111 */ + 0, /* 112 */ + 0, /* 113 */ + cVEC, /* 114 */ + 0, /* 115 */ + cVEC, /* 116 */ + 0, /* 117 */ + 0, /* 118 */ + 0, /* 119 */ + 0, /* 120 */ + 0, /* 121 */ + 0, /* 122 */ + 0, /* 123 */ + 0, /* 124 */ + 0, /* 125 */ + 0, /* 126 */ + 0, /* 127 */ + cNUC, /* 128 */ + cNUC, /* 129 */ + cNUC, /* 130 */ + cNUC, /* 131 */ + cNUC, /* 132 */ + cNUC, /* 133 */ + cNUC, /* 134 */ + cNUC, /* 135 */ + cNUC, /* 136 */ + cNUC, /* 137 */ + cNUC, /* 138 */ + cNUC, /* 139 */ + cNUC, /* 140 */ + cNUC, /* 141 */ + cNUC, /* 142 */ + cNUC, /* 143 */ + cNUC, /* 144 */ + cNUC, /* 145 */ + cNUC, /* 146 */ + cNUC, /* 147 */ + cNUC, /* 148 */ + cNUC, /* 149 */ + cNUC, /* 150 */ + cNUC, /* 151 */ + cNUC, /* 152 */ + cNUC, /* 153 */ + cNUC, /* 154 */ + cNUC, /* 155 */ + cNUC, /* 156 */ + cNUC, /* 157 */ + cNUC, /* 158 */ + cNUC, /* 159 */ + cNUC, /* 160 */ + cNUC, /* 161 */ + cNUC, /* 162 */ + cNUC, /* 163 */ + cNUC, /* 164 */ + cNUC, /* 165 */ + cNUC, /* 166 */ + cNUC, /* 167 */ + cNUC, /* 168 */ + cNUC, /* 169 */ + cNUC, /* 170 */ + cNUC, /* 171 */ + cNUC, /* 172 */ + cNUC, /* 173 */ + cNUC, /* 174 */ + cNUC, /* 175 */ + cNUC, /* 176 */ + cNUC, /* 177 */ + cNUC, /* 178 */ + cNUC, /* 179 */ + cNUC, /* 180 */ + cNUC, /* 181 */ + cNUC, /* 182 */ + cNUC, /* 183 */ + cNUC, /* 184 */ + cNUC, /* 185 */ + cNUC, /* 186 */ + cNUC, /* 187 */ + cNUC, /* 188 */ + cNUC, /* 189 */ + cNUC, /* 190 */ + cNUC, /* 191 */ + cNUC, /* 192 */ + cNUC, /* 193 */ + cNUC, /* 194 */ + cNUC, /* 195 */ + cNUC, /* 196 */ + cNUC, /* 197 */ + cNUC, /* 198 */ + cNUC, /* 199 */ + cNUC, /* 200 */ + cNUC, /* 201 */ + cNUC, /* 202 */ + cNUC, /* 203 */ + cNUC, /* 204 */ + cNUC, /* 205 */ + cNUC, /* 206 */ + cNUC, /* 207 */ + cNUC, /* 208 */ + cNUC, /* 209 */ + cNUC, /* 210 */ + cNUC, /* 211 */ + cNUC, /* 212 */ + cNUC, /* 213 */ + cNUC, /* 214 */ + cNUC, /* 215 */ + cNUC, /* 216 */ + cNUC, /* 217 */ + cNUC, /* 218 */ + cNUC, /* 219 */ + cNUC, /* 220 */ + cNUC, /* 221 */ + cNUC, /* 222 */ + cNUC, /* 223 */ + cNUC, /* 224 */ + cNUC, /* 225 */ + cNUC, /* 226 */ + cNUC, /* 227 */ + cNUC, /* 228 */ + cNUC, /* 229 */ + cNUC, /* 230 */ + cNUC, /* 231 */ + cNUC, /* 232 */ + cNUC, /* 233 */ + cNUC, /* 234 */ + cNUC, /* 235 */ + cNUC, /* 236 */ + cNUC, /* 237 */ + cNUC, /* 238 */ + cNUC, /* 239 */ + cNUC, /* 240 */ + cNUC, /* 241 */ + cNUC, /* 242 */ + cNUC, /* 243 */ + cNUC, /* 244 */ + cNUC, /* 245 */ + cNUC, /* 246 */ + cNUC, /* 247 */ + cNUC, /* 248 */ + cNUC, /* 249 */ + cNUC, /* 250 */ + cNUC, /* 251 */ + cNUC, /* 252 */ + cNUC, /* 253 */ + cNUC, /* 254 */ + cNUC, /* 255 */ +} diff --git a/vendor/github.com/pquerna/ffjson/fflib/v1/reader.go b/vendor/github.com/pquerna/ffjson/fflib/v1/reader.go new file mode 100644 index 000000000..0f22c469d --- /dev/null +++ b/vendor/github.com/pquerna/ffjson/fflib/v1/reader.go @@ -0,0 +1,512 @@ +/** + * Copyright 2014 Paul Querna + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + */ + +package v1 + +import ( + "fmt" + "io" + "unicode" + "unicode/utf16" +) + +const sliceStringMask = cIJC | cNFP + +type ffReader struct { + s []byte + i int + l int +} + +func newffReader(d []byte) *ffReader { + return &ffReader{ + s: d, + i: 0, + l: len(d), + } +} + +func (r *ffReader) Slice(start, stop int) []byte { + return r.s[start:stop] +} + +func (r *ffReader) Pos() int { + return r.i +} + +// Reset the reader, and add new input. +func (r *ffReader) Reset(d []byte) { + r.s = d + r.i = 0 + r.l = len(d) +} + +// Calcuates the Position with line and line offset, +// because this isn't counted for performance reasons, +// it will iterate the buffer from the beginning, and should +// only be used in error-paths. +func (r *ffReader) PosWithLine() (int, int) { + currentLine := 1 + currentChar := 0 + + for i := 0; i < r.i; i++ { + c := r.s[i] + currentChar++ + if c == '\n' { + currentLine++ + currentChar = 0 + } + } + + return currentLine, currentChar +} + +func (r *ffReader) ReadByteNoWS() (byte, error) { + if r.i >= r.l { + return 0, io.EOF + } + + j := r.i + + for { + c := r.s[j] + j++ + + // inline whitespace parsing gives another ~8% performance boost + // for many kinds of nicely indented JSON. + // ... and using a [255]bool instead of multiple ifs, gives another 2% + /* + if c != '\t' && + c != '\n' && + c != '\v' && + c != '\f' && + c != '\r' && + c != ' ' { + r.i = j + return c, nil + } + */ + if whitespaceLookupTable[c] == false { + r.i = j + return c, nil + } + + if j >= r.l { + return 0, io.EOF + } + } +} + +func (r *ffReader) ReadByte() (byte, error) { + if r.i >= r.l { + return 0, io.EOF + } + + r.i++ + + return r.s[r.i-1], nil +} + +func (r *ffReader) UnreadByte() error { + if r.i <= 0 { + panic("ffReader.UnreadByte: at beginning of slice") + } + r.i-- + return nil +} + +func (r *ffReader) readU4(j int) (rune, error) { + + var u4 [4]byte + for i := 0; i < 4; i++ { + if j >= r.l { + return -1, io.EOF + } + c := r.s[j] + if byteLookupTable[c]&cVHC != 0 { + u4[i] = c + j++ + continue + } else { + // TODO(pquerna): handle errors better. layering violation. + return -1, fmt.Errorf("lex_string_invalid_hex_char: %v %v", c, string(u4[:])) + } + } + + // TODO(pquerna): utf16.IsSurrogate + rr, err := ParseUint(u4[:], 16, 64) + if err != nil { + return -1, err + } + return rune(rr), nil +} + +func (r *ffReader) handleEscaped(c byte, j int, out DecodingBuffer) (int, error) { + if j >= r.l { + return 0, io.EOF + } + + c = r.s[j] + j++ + + if c == 'u' { + ru, err := r.readU4(j) + if err != nil { + return 0, err + } + + if utf16.IsSurrogate(ru) { + ru2, err := r.readU4(j + 6) + if err != nil { + return 0, err + } + out.Write(r.s[r.i : j-2]) + r.i = j + 10 + j = r.i + rval := utf16.DecodeRune(ru, ru2) + if rval != unicode.ReplacementChar { + out.WriteRune(rval) + } else { + return 0, fmt.Errorf("lex_string_invalid_unicode_surrogate: %v %v", ru, ru2) + } + } else { + out.Write(r.s[r.i : j-2]) + r.i = j + 4 + j = r.i + out.WriteRune(ru) + } + return j, nil + } else if byteLookupTable[c]&cVEC == 0 { + return 0, fmt.Errorf("lex_string_invalid_escaped_char: %v", c) + } else { + out.Write(r.s[r.i : j-2]) + r.i = j + j = r.i + + switch c { + case '"': + out.WriteByte('"') + case '\\': + out.WriteByte('\\') + case '/': + out.WriteByte('/') + case 'b': + out.WriteByte('\b') + case 'f': + out.WriteByte('\f') + case 'n': + out.WriteByte('\n') + case 'r': + out.WriteByte('\r') + case 't': + out.WriteByte('\t') + } + } + + return j, nil +} + +func (r *ffReader) SliceString(out DecodingBuffer) error { + var c byte + // TODO(pquerna): string_with_escapes? de-escape here? + j := r.i + + for { + if j >= r.l { + return io.EOF + } + + j, c = scanString(r.s, j) + + if c == '"' { + if j != r.i { + out.Write(r.s[r.i : j-1]) + r.i = j + } + return nil + } else if c == '\\' { + var err error + j, err = r.handleEscaped(c, j, out) + if err != nil { + return err + } + } else if byteLookupTable[c]&cIJC != 0 { + return fmt.Errorf("lex_string_invalid_json_char: %v", c) + } + continue + } +} + +// TODO(pquerna): consider combining wibth the normal byte mask. +var whitespaceLookupTable [256]bool = [256]bool{ + false, /* 0 */ + false, /* 1 */ + false, /* 2 */ + false, /* 3 */ + false, /* 4 */ + false, /* 5 */ + false, /* 6 */ + false, /* 7 */ + false, /* 8 */ + true, /* 9 */ + true, /* 10 */ + true, /* 11 */ + true, /* 12 */ + true, /* 13 */ + false, /* 14 */ + false, /* 15 */ + false, /* 16 */ + false, /* 17 */ + false, /* 18 */ + false, /* 19 */ + false, /* 20 */ + false, /* 21 */ + false, /* 22 */ + false, /* 23 */ + false, /* 24 */ + false, /* 25 */ + false, /* 26 */ + false, /* 27 */ + false, /* 28 */ + false, /* 29 */ + false, /* 30 */ + false, /* 31 */ + true, /* 32 */ + false, /* 33 */ + false, /* 34 */ + false, /* 35 */ + false, /* 36 */ + false, /* 37 */ + false, /* 38 */ + false, /* 39 */ + false, /* 40 */ + false, /* 41 */ + false, /* 42 */ + false, /* 43 */ + false, /* 44 */ + false, /* 45 */ + false, /* 46 */ + false, /* 47 */ + false, /* 48 */ + false, /* 49 */ + false, /* 50 */ + false, /* 51 */ + false, /* 52 */ + false, /* 53 */ + false, /* 54 */ + false, /* 55 */ + false, /* 56 */ + false, /* 57 */ + false, /* 58 */ + false, /* 59 */ + false, /* 60 */ + false, /* 61 */ + false, /* 62 */ + false, /* 63 */ + false, /* 64 */ + false, /* 65 */ + false, /* 66 */ + false, /* 67 */ + false, /* 68 */ + false, /* 69 */ + false, /* 70 */ + false, /* 71 */ + false, /* 72 */ + false, /* 73 */ + false, /* 74 */ + false, /* 75 */ + false, /* 76 */ + false, /* 77 */ + false, /* 78 */ + false, /* 79 */ + false, /* 80 */ + false, /* 81 */ + false, /* 82 */ + false, /* 83 */ + false, /* 84 */ + false, /* 85 */ + false, /* 86 */ + false, /* 87 */ + false, /* 88 */ + false, /* 89 */ + false, /* 90 */ + false, /* 91 */ + false, /* 92 */ + false, /* 93 */ + false, /* 94 */ + false, /* 95 */ + false, /* 96 */ + false, /* 97 */ + false, /* 98 */ + false, /* 99 */ + false, /* 100 */ + false, /* 101 */ + false, /* 102 */ + false, /* 103 */ + false, /* 104 */ + false, /* 105 */ + false, /* 106 */ + false, /* 107 */ + false, /* 108 */ + false, /* 109 */ + false, /* 110 */ + false, /* 111 */ + false, /* 112 */ + false, /* 113 */ + false, /* 114 */ + false, /* 115 */ + false, /* 116 */ + false, /* 117 */ + false, /* 118 */ + false, /* 119 */ + false, /* 120 */ + false, /* 121 */ + false, /* 122 */ + false, /* 123 */ + false, /* 124 */ + false, /* 125 */ + false, /* 126 */ + false, /* 127 */ + false, /* 128 */ + false, /* 129 */ + false, /* 130 */ + false, /* 131 */ + false, /* 132 */ + false, /* 133 */ + false, /* 134 */ + false, /* 135 */ + false, /* 136 */ + false, /* 137 */ + false, /* 138 */ + false, /* 139 */ + false, /* 140 */ + false, /* 141 */ + false, /* 142 */ + false, /* 143 */ + false, /* 144 */ + false, /* 145 */ + false, /* 146 */ + false, /* 147 */ + false, /* 148 */ + false, /* 149 */ + false, /* 150 */ + false, /* 151 */ + false, /* 152 */ + false, /* 153 */ + false, /* 154 */ + false, /* 155 */ + false, /* 156 */ + false, /* 157 */ + false, /* 158 */ + false, /* 159 */ + false, /* 160 */ + false, /* 161 */ + false, /* 162 */ + false, /* 163 */ + false, /* 164 */ + false, /* 165 */ + false, /* 166 */ + false, /* 167 */ + false, /* 168 */ + false, /* 169 */ + false, /* 170 */ + false, /* 171 */ + false, /* 172 */ + false, /* 173 */ + false, /* 174 */ + false, /* 175 */ + false, /* 176 */ + false, /* 177 */ + false, /* 178 */ + false, /* 179 */ + false, /* 180 */ + false, /* 181 */ + false, /* 182 */ + false, /* 183 */ + false, /* 184 */ + false, /* 185 */ + false, /* 186 */ + false, /* 187 */ + false, /* 188 */ + false, /* 189 */ + false, /* 190 */ + false, /* 191 */ + false, /* 192 */ + false, /* 193 */ + false, /* 194 */ + false, /* 195 */ + false, /* 196 */ + false, /* 197 */ + false, /* 198 */ + false, /* 199 */ + false, /* 200 */ + false, /* 201 */ + false, /* 202 */ + false, /* 203 */ + false, /* 204 */ + false, /* 205 */ + false, /* 206 */ + false, /* 207 */ + false, /* 208 */ + false, /* 209 */ + false, /* 210 */ + false, /* 211 */ + false, /* 212 */ + false, /* 213 */ + false, /* 214 */ + false, /* 215 */ + false, /* 216 */ + false, /* 217 */ + false, /* 218 */ + false, /* 219 */ + false, /* 220 */ + false, /* 221 */ + false, /* 222 */ + false, /* 223 */ + false, /* 224 */ + false, /* 225 */ + false, /* 226 */ + false, /* 227 */ + false, /* 228 */ + false, /* 229 */ + false, /* 230 */ + false, /* 231 */ + false, /* 232 */ + false, /* 233 */ + false, /* 234 */ + false, /* 235 */ + false, /* 236 */ + false, /* 237 */ + false, /* 238 */ + false, /* 239 */ + false, /* 240 */ + false, /* 241 */ + false, /* 242 */ + false, /* 243 */ + false, /* 244 */ + false, /* 245 */ + false, /* 246 */ + false, /* 247 */ + false, /* 248 */ + false, /* 249 */ + false, /* 250 */ + false, /* 251 */ + false, /* 252 */ + false, /* 253 */ + false, /* 254 */ + false, /* 255 */ +} diff --git a/vendor/github.com/pquerna/ffjson/fflib/v1/reader_scan_generic.go b/vendor/github.com/pquerna/ffjson/fflib/v1/reader_scan_generic.go new file mode 100644 index 000000000..47c260770 --- /dev/null +++ b/vendor/github.com/pquerna/ffjson/fflib/v1/reader_scan_generic.go @@ -0,0 +1,34 @@ +/** + * Copyright 2014 Paul Querna + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + */ + +package v1 + +func scanString(s []byte, j int) (int, byte) { + for { + if j >= len(s) { + return j, 0 + } + + c := s[j] + j++ + if byteLookupTable[c]&sliceStringMask == 0 { + continue + } + + return j, c + } +} -- cgit v1.2.3-54-g00ecf