![PODMAN logo](../../logo/podman-logo-source.svg) # Cirrus-CI Similar to other integrated github CI/CD services, Cirrus utilizes a simple YAML-based configuration/description file: ``.cirrus.yml``. Ref: https://cirrus-ci.org/ ## Workflow All tasks execute in parallel, unless there are conditions or dependencies which alter this behavior. Within each task, each script executes in sequence, so long as any previous script exited successfully. The overall state of each task (pass or fail) is set based on the exit status of the last script to execute. ### ``gating`` Task ***N/B: Steps below are performed by automation*** 1. Launch a purpose-built container in Cirrus's community cluster. For container image details, please see [the contributors guide](https://github.com/containers/libpod/blob/master/CONTRIBUTING.md#go-format-and-lint). 3. ``validate``: Perform standard `make validate` source verification, Should run for less than a minute or two. 4. ``lint``: Execute regular `make lint` to check for any code cruft. Should also run for less than a few minutes. 5. ``vendor``: runs `make vendor-in-container` followed by `./hack/tree_status.sh` to check whether the git tree is clean. The reasoning for that is to make sure that the vendor.conf, the code and the vendored packages in ./vendor are in sync at all times. ### ``meta`` Task ***N/B: Steps below are performed by automation*** 1. Launch a container built from definition in ``./contrib/imgts``. 2. Update VM Image metadata to help track usage across all automation. 4. Always exits successfully unless there's a major problem. ### ``testing`` Task ***N/B: Steps below are performed by automation*** 1. After `gating` passes, spin up one VM per `matrix: image_name` item. Once accessible, ``ssh`` into each VM as the `root` user. 2. ``setup_environment.sh``: Configure root's `.bash_profile` for all subsequent scripts (each run in a new shell). Any distribution-specific environment variables are also defined here. For example, setting tags/flags to use compiling. 5. ``integration_test.sh``: Execute integration-testing. This is much more involved, and relies on access to external resources like container images and code from other repositories. Total execution time is capped at 2-hours (includes all the above) but this script normally completes in less than an hour. ### ``special_testing_cross`` Task Confirm that cross-compile of podman-remote functions for both `windows` and `darwin` targets. ### ``special_testing_cgroupv2`` Task Use the latest Fedora release with the required kernel options pre-set for exercising cgroups v2 with Podman integration tests. Also depends on having `SPECIALMODE` set to 'cgroupv2` ### ``test_build_cache_images_task`` Task Modifying the contents of cache-images is tested by making changes to one or more of the ``./contrib/cirrus/packer/*_setup.sh`` files. Then in the PR description, add the magic string: ``***CIRRUS: TEST IMAGES***`` ***N/B: Steps below are performed by automation*** 1. ``setup_environment.sh``: Same as for other tasks. 2. ``build_vm_images.sh``: Utilize [the packer tool](http://packer.io/docs/) to produce new VM images. Create a new VM from each base-image, connect to them with ``ssh``, and perform the steps as defined by the ``$PACKER_BASE/libpod_images.yml`` file: 1. On a base-image VM, as root, copy the current state of the repository into ``/tmp/libpod``. 2. Execute distribution-specific scripts to prepare the image for use. For example, ``fedora_setup.sh``. 3. If successful, shut down each VM and record the names, and dates into a json manifest file. 4. Move the manifest file, into a google storage bucket object. This is a retained as a secondary method for tracking/auditing creation of VM images, should it ever be needed. ### ``verify_test_built_images`` Task Only runs following successful ``test_build_cache_images_task`` task. Uses images following the standard naming format; ***however, only runs a limited sub-set of automated tests***. Validating newly built images fully, requires updating ``.cirrus.yml``. ***N/B: Steps below are performed by automation*** 1. Using the just build VM images, launch VMs and wait for them to boot. 2. Execute the `setup_environment.sh` as in the `testing` task. 2. Execute the `integration_test.sh` as in the `testing` task. ***Manual Steps:*** Assuming the automated steps pass, then you'll find the new image names displayed at the end of the `test_build_cache_images`. For example: ``` ...cut... [+0747s] ==> Builds finished. The artifacts of successful builds are: [+0747s] --> ubuntu-18: A disk image was created: ubuntu-18-libpod-5664838702858240 [+0747s] --> fedora-29: A disk image was created: fedora-29-libpod-5664838702858240 [+0747s] --> fedora-30: A disk image was created: fedora-30-libpod-5664838702858240 [+0747s] --> ubuntu-19: A disk image was created: ubuntu-19-libpod-5664838702858240 ``` Notice the suffix on all the image names comes from the env. var. set in *.cirrus.yml*: `BUILT_IMAGE_SUFFIX: "-${CIRRUS_REPO_NAME}-${CIRRUS_BUILD_ID}"`. Edit `.cirrus.yml`, in the top-level `env` section, update the suffix variable used at runtime to launch VMs for testing: ```yaml env: ...cut... #### #### Cache-image names to test with (double-quotes around names are critical) ### _BUILT_IMAGE_SUFFIX: "libpod-5664838702858240" FEDORA_CACHE_IMAGE_NAME: "fedora-30-${_BUILT_IMAGE_SUFFIX}" PRIOR_FEDORA_CACHE_IMAGE_NAME: "fedora-29-${_BUILT_IMAGE_SUFFIX}" ...cut... ``` ***NOTES:*** * If re-using the same PR with new images in `.cirrus.yml`, take care to also *update the PR description* to remove the magic ``***CIRRUS: TEST IMAGES***`` string. Keeping it and `--force` pushing would needlessly cause Cirrus-CI to build and test images again. * In the future, if you need to review the log from the build that produced the referenced image: * Note the Build ID from the image name (for example `5664838702858240`). * Go to that build in the Cirrus-CI WebUI, using the build ID in the URL. (For example `https://cirrus-ci.com/build/5664838702858240`. * Choose the *test_build_cache_images* task. * Open the *build_vm_images* script section. ### `release` Task Gathers up zip files uploaded by other tasks, from the local Cirrus-CI caching service. Depending on the execution context (a PR or a branch), this task uploads the files found to storage buckets at: * [https://storage.cloud.google.com/libpod-pr-releases](https://storage.cloud.google.com/libpod-pr-releases) * [https://storage.cloud.google.com/libpod-master-releases](https://storage.cloud.google.com/libpod-master-releases) ***Note:*** Repeated builds from the same PR or branch, will clobber previous archives *by design*. This is intended so that the "latest" archive is always available at a consistent URL. The precise details regarding a particular build is encoded within the zip-archive comment. ## Base-images Base-images are VM disk-images specially prepared for executing as GCE VMs. In particular, they run services on startup similar in purpose/function as the standard 'cloud-init' services. * The google services are required for full support of ssh-key management and GCE OAuth capabilities. Google provides native images in GCE with services pre-installed, for many platforms. For example, RHEL, CentOS, and Ubuntu. * Google does ***not*** provide any images for Fedora (as of 5/2019), nor do they provide a base-image prepared to run packer for creating other images in the ``test_build_vm_images`` Task (above). * Base images do not need to be produced often, but doing so completely manually would be time-consuming and error-prone. Therefore a special semi-automatic *Makefile* target is provided to assist with producing all the base-images: ``libpod_base_images`` To produce new base-images, including an `image-builder-image` (used by the ``cache_images`` Task) some input parameters are required: * ``GCP_PROJECT_ID``: The complete GCP project ID string e.g. foobar-12345 identifying where the images will be stored. * ``GOOGLE_APPLICATION_CREDENTIALS``: A *JSON* file containing credentials for a GCE service account. This can be [a service account](https://cloud.google.com/docs/authentication/production#obtaining_and_providing_service_account_credentials_manually) or [end-user credentials](https://cloud.google.com/docs/authentication/end-user#creating_your_client_credentials) * Optionally, CSV's may be specified to ``PACKER_BUILDS`` to limit the base-images produced. For example, ``PACKER_BUILDS=fedora,image-builder-image``. If there is no existing 'image-builder-image' within GCE, a new one may be bootstrapped by creating a CentOS 7 VM with support for nested-virtualization, and with elevated cloud privileges (to access GCE, from within the GCE VM). For example: ``` $ alias pgcloud='sudo podman run -it --rm -e AS_ID=$UID -e AS_USER=$USER -v $HOME:$HOME:z quay.io/cevich/gcloud_centos:latest' $ URL=https://www.googleapis.com/auth $ SCOPES=$URL/userinfo.email,$URL/compute,$URL/devstorage.full_control # The --min-cpu-platform is critical for nested-virt. $ pgcloud compute instances create $USER-image-builder \ --image-family centos-7 \ --boot-disk-size "200GB" \ --min-cpu-platform "Intel Haswell" \ --machine-type n1-standard-2 \ --scopes $SCOPES ``` Then from that VM, execute the ``contrib/cirrus/packer/image-builder-image_base_setup.sh`` script. Shutdown the VM, and convert it into a new image-builder-image. Building new base images is done by first creating a VM from an image-builder-image and copying the credentials json file to it. ``` $ hack/get_ci_vm.sh image-builder-image-1541772081 ...in another terminal... $ pgcloud compute scp /path/to/gac.json $USER-image-builder-image-1541772081:. ``` Then, on the VM, change to the ``packer`` sub-directory, and build the images: ``` $ cd libpod/contrib/cirrus/packer $ make libpod_base_images GCP_PROJECT_ID= \ GOOGLE_APPLICATION_CREDENTIALS=/path/to/gac.json \ PACKER_BUILDS= ``` Assuming this is successful (hence the semi-automatic part), packer will produce a ``packer-manifest.json`` output file. This contains the base-image names suitable for updating in ``.cirrus.yml``, `env` keys ``*_BASE_IMAGE``. On failure, it should be possible to determine the problem from the packer output. Sometimes that means setting `PACKER_LOG=1` and troubleshooting the nested virt calls. It's also possible to observe the (nested) qemu-kvm console output. Simply set the ``TTYDEV`` parameter, for example: ``` $ make libpod_base_images ... TTYDEV=$(tty) ... ``` ## `$SPECIALMODE` Some tasks alter their behavior based on this value. A summary of supported values follows: * `none`: Operate as normal, this is the default value if unspecified. * `rootless`: Causes a random, ordinary user account to be created and utilized for testing. * `in_podman`: Causes testing to occur within a container executed by * `windows`: See **darwin** * `darwin`: Signals the ``special_testing_cross`` task to cross-compile the remote client.