% podman-build "1" ## NAME podman\-build - Build a container image using a Dockerfile. ## SYNOPSIS **podman build** [*options*] *context* ## DESCRIPTION **podman build** Builds an image using instructions from one or more Dockerfiles and a specified build context directory. The build context directory can be specified as the http(s) URL of an archive, git repository or Dockerfile. Dockerfiles ending with a ".in" suffix will be preprocessed via CPP(1). This can be useful to decompose Dockerfiles into several reusable parts that can be used via CPP's **#include** directive. Notice, a Dockerfile.in file can still be used by other tools when manually preprocessing them via `cpp -E`. When the URL is an archive, the contents of the URL is downloaded to a temporary location and extracted before execution. When the URL is an Dockerfile, the Dockerfile is downloaded to a temporary location. When a Git repository is set as the URL, the repository is cloned locally and then set as the context. ## OPTIONS **--add-host**=[] Add a custom host-to-IP mapping (host:ip) Add a line to /etc/hosts. The format is hostname:ip. The **--add-host** option can be set multiple times. **--annotation** *annotation* Add an image *annotation* (e.g. annotation=*value*) to the image metadata. Can be used multiple times. Note: this information is not present in Docker image formats, so it is discarded when writing images in Docker formats. **--authfile** *path* Path of the authentication file. Default is ${XDG\_RUNTIME\_DIR}/containers/auth.json, which is set using `podman login`. If the authorization state is not found there, $HOME/.docker/config.json is checked, which is set using `docker login`. **--build-arg** *arg=value* Specifies a build argument and its value, which will be interpolated in instructions read from the Dockerfiles in the same way that environment variables are, but which will not be added to environment variable list in the resulting image's configuration. **--cache-from** Images to utilize as potential cache sources. Podman does not currently support caching so this is a NOOP. **--cap-add**=*CAP\_xxx* When executing RUN instructions, run the command specified in the instruction with the specified capability added to its capability set. Certain capabilities are granted by default; this option can be used to add more. **--cap-drop**=*CAP\_xxx* When executing RUN instructions, run the command specified in the instruction with the specified capability removed from its capability set. The CAP\_AUDIT\_WRITE, CAP\_CHOWN, CAP\_DAC\_OVERRIDE, CAP\_FOWNER, CAP\_FSETID, CAP\_KILL, CAP\_MKNOD, CAP\_NET\_BIND\_SERVICE, CAP\_SETFCAP, CAP\_SETGID, CAP\_SETPCAP, CAP\_SETUID, and CAP\_SYS\_CHROOT capabilities are granted by default; this option can be used to remove them. If a capability is specified to both the **--cap-add** and **--cap-drop** options, it will be dropped, regardless of the order in which the options were given. **--cert-dir** *path* Use certificates at *path* (\*.crt, \*.cert, \*.key) to connect to the registry. Default certificates directory is _/etc/containers/certs.d_. **--cgroup-parent**="" Path to cgroups under which the cgroup for the container will be created. If the path is not absolute, the path is considered to be relative to the cgroups path of the init process. Cgroups will be created if they do not already exist. **--compress** This option is added to be aligned with other containers CLIs. Podman doesn't communicate with a daemon or a remote server. Thus, compressing the data before sending it is irrelevant to Podman. **--cni-config-dir**=*directory* Location of CNI configuration files which will dictate which plugins will be used to configure network interfaces and routing for containers created for handling `RUN` instructions, if those containers will be run in their own network namespaces, and networking is not disabled. **--cni-plugin-path**=*directory[:directory[:directory[...]]]* List of directories in which the CNI plugins which will be used for configuring network namespaces can be found. **--cpu-period**=*0* Limit the CPU CFS (Completely Fair Scheduler) period Limit the container's CPU usage. This flag tell the kernel to restrict the container's CPU usage to the period you specify. **--cpu-quota**=*0* Limit the CPU CFS (Completely Fair Scheduler) quota Limit the container's CPU usage. By default, containers run with the full CPU resource. This flag tell the kernel to restrict the container's CPU usage to the quota you specify. **--cpu-shares, -c**=*0* CPU shares (relative weight) By default, all containers get the same proportion of CPU cycles. This proportion can be modified by changing the container's CPU share weighting relative to the weighting of all other running containers. To modify the proportion from the default of 1024, use the **--cpu-shares** flag to set the weighting to 2 or higher. The proportion will only apply when CPU-intensive processes are running. When tasks in one container are idle, other containers can use the left-over CPU time. The actual amount of CPU time will vary depending on the number of containers running on the system. For example, consider three containers, one has a cpu-share of 1024 and two others have a cpu-share setting of 512. When processes in all three containers attempt to use 100% of CPU, the first container would receive 50% of the total CPU time. If you add a fourth container with a cpu-share of 1024, the first container only gets 33% of the CPU. The remaining containers receive 16.5%, 16.5% and 33% of the CPU. On a multi-core system, the shares of CPU time are distributed over all CPU cores. Even if a container is limited to less than 100% of CPU time, it can use 100% of each individual CPU core. For example, consider a system with more than three cores. If you start one container **{C0}** with **-c=512** running one process, and another container **{C1}** with **-c=1024** running two processes, this can result in the following division of CPU shares: PID container CPU CPU share 100 {C0} 0 100% of CPU0 101 {C1} 1 100% of CPU1 102 {C1} 2 100% of CPU2 **--cpuset-cpus**="" CPUs in which to allow execution (0-3, 0,1) **--cpuset-mems**="" Memory nodes (MEMs) in which to allow execution (0-3, 0,1). Only effective on NUMA systems. If you have four memory nodes on your system (0-3), use `--cpuset-mems=0,1` then processes in your container will only use memory from the first two memory nodes. **--creds** *creds* The [username[:password]] to use to authenticate with the registry if required. If one or both values are not supplied, a command line prompt will appear and the value can be entered. The password is entered without echo. **--disable-content-trust** This is a Docker specific option to disable image verification to a Docker registry and is not supported by Buildah. This flag is a NOOP and provided soley for scripting compatibility. **--file, -f** *Dockerfile* Specifies a Dockerfile which contains instructions for building the image, either a local file or an **http** or **https** URL. If more than one Dockerfile is specified, *FROM* instructions will only be accepted from the first specified file. If a build context is not specified, and at least one Dockerfile is a local file, the directory in which it resides will be used as the build context. If you specify `-f -`, the Dockerfile contents will be read from stdin. **--force-rm** *bool-value* Always remove intermediate containers after a build, even if the build is unsuccessful. **--format** Control the format for the built image's manifest and configuration data. Recognized formats include *oci* (OCI image-spec v1.0, the default) and *docker* (version 2, using schema format 2 for the manifest). Note: You can also override the default format by setting the BUILDAH\_FORMAT environment variable. `export BUILDAH_FORMAT=docker` **--iidfile** *ImageIDfile* Write the image ID to the file. **--ipc** *how* Sets the configuration for IPC namespaces when handling `RUN` instructions. The configured value can be "" (the empty string) or "container" to indicate that a new IPC namespace should be created, or it can be "host" to indicate that the IPC namespace in which `buildah` itself is being run should be reused, or it can be the path to an IPC namespace which is already in use by another process. **--isolation** *type* Controls what type of isolation is used for running processes as part of `RUN` instructions. Recognized types include *oci* (OCI-compatible runtime, the default), *rootless* (OCI-compatible runtime invoked using a modified configuration and its --rootless flag enabled, with *--no-new-keyring --no-pivot* added to its *create* invocation, with network and UTS namespaces disabled, and IPC, PID, and user namespaces enabled; the default for unprivileged users), and *chroot* (an internal wrapper that leans more toward chroot(1) than container technology). Note: You can also override the default isolation type by setting the BUILDAH\_ISOLATION environment variable. `export BUILDAH_ISOLATION=oci` **--label** *label* Add an image *label* (e.g. label=*value*) to the image metadata. Can be used multiple times. **--layers** Cache intermediate images during the build process (Default is `false`). Note: You can also override the default value of layers by setting the BUILDAH\_LAYERS environment variable. `export BUILDAH_LAYERS=true` **--logfile** *filename* Log output which would be sent to standard output and standard error to the specified file instead of to standard output and standard error. **--memory, -m**="" Memory limit (format: [], where unit = b, k, m or g) Allows you to constrain the memory available to a container. If the host supports swap memory, then the **-m** memory setting can be larger than physical RAM. If a limit of 0 is specified (not using **-m**), the container's memory is not limited. The actual limit may be rounded up to a multiple of the operating system's page size (the value would be very large, that's millions of trillions). **--memory-swap**="LIMIT" A limit value equal to memory plus swap. Must be used with the **-m** (**--memory**) flag. The swap `LIMIT` should always be larger than **-m** (**--memory**) value. By default, the swap `LIMIT` will be set to double the value of --memory. The format of `LIMIT` is `[]`. Unit can be `b` (bytes), `k` (kilobytes), `m` (megabytes), or `g` (gigabytes). If you don't specify a unit, `b` is used. Set LIMIT to `-1` to enable unlimited swap. **--net** *how* **--network** *how* Sets the configuration for network namespaces when handling `RUN` instructions. The configured value can be "" (the empty string) or "container" to indicate that a new network namespace should be created, or it can be "host" to indicate that the network namespace in which `buildah` itself is being run should be reused, or it can be the path to a network namespace which is already in use by another process. **--no-cache** Do not use existing cached images for the container build. Build from the start with a new set of cached layers. **--pid** *how* Sets the configuration for PID namespaces when handling `RUN` instructions. The configured value can be "" (the empty string) or "container" to indicate that a new PID namespace should be created, or it can be "host" to indicate that the PID namespace in which `buildah` itself is being run should be reused, or it can be the path to a PID namespace which is already in use by another process. **--pull** Pull the image if it is not present. If this flag is disabled (with *--pull=false*) and the image is not present, the image will not be pulled. Defaults to *true*. **--pull-always** Pull the image even if a version of the image is already present. **--quiet, -q** Suppress output messages which indicate which instruction is being processed, and of progress when pulling images from a registry, and when writing the output image. **--rm** *bool-value* Remove intermediate containers after a successful build (default true). **--runtime** *path* The *path* to an alternate OCI-compatible runtime, which will be used to run commands specified by the **RUN** instruction. Note: You can also override the default runtime by setting the BUILDAH\_RUNTIME environment variable. `export BUILDAH_RUNTIME=/usr/local/bin/runc` **--runtime-flag** *flag* Adds global flags for the container rutime. To list the supported flags, please consult the manpages of the selected container runtime (`runc` is the default runtime, the manpage to consult is `runc(8)`). Note: Do not pass the leading `--` to the flag. To pass the runc flag `--log-format json` to podman build, the option given would be `--runtime-flag log-format=json`. **--security-opt**=[] Security Options "label=user:USER" : Set the label user for the container "label=role:ROLE" : Set the label role for the container "label=type:TYPE" : Set the label type for the container "label=level:LEVEL" : Set the label level for the container "label=disable" : Turn off label confinement for the container "no-new-privileges" : Not supported "seccomp=unconfined" : Turn off seccomp confinement for the container "seccomp=profile.json : White listed syscalls seccomp Json file to be used as a seccomp filter "apparmor=unconfined" : Turn off apparmor confinement for the container "apparmor=your-profile" : Set the apparmor confinement profile for the container **--shm-size**="" Size of `/dev/shm`. The format is ``. `number` must be greater than `0`. Unit is optional and can be `b` (bytes), `k` (kilobytes), `m`(megabytes), or `g` (gigabytes). If you omit the unit, the system uses bytes. If you omit the size entirely, the system uses `64m`. **--signature-policy** *signaturepolicy* Pathname of a signature policy file to use. It is not recommended that this option be used, as the default behavior of using the system-wide default policy (frequently */etc/containers/policy.json*) is most often preferred. **--squash** Squash all of the new image's layers (including those inherited from a base image) into a single new layer. **--tag, -t** *imageName* Specifies the name which will be assigned to the resulting image if the build process completes successfully. If _imageName_ does not include a registry name, the registry name *localhost* will be prepended to the image name. **--tls-verify** *bool-value* Require HTTPS and verify certificates when talking to container registries (defaults to true). **--ulimit**=*type*=*soft-limit*[:*hard-limit*] Specifies resource limits to apply to processes launched when processing `RUN` instructions. This option can be specified multiple times. Recognized resource types include: "core": maximimum core dump size (ulimit -c) "cpu": maximum CPU time (ulimit -t) "data": maximum size of a process's data segment (ulimit -d) "fsize": maximum size of new files (ulimit -f) "locks": maximum number of file locks (ulimit -x) "memlock": maximum amount of locked memory (ulimit -l) "msgqueue": maximum amount of data in message queues (ulimit -q) "nice": niceness adjustment (nice -n, ulimit -e) "nofile": maximum number of open files (ulimit -n) "nproc": maximum number of processes (ulimit -u) "rss": maximum size of a process's (ulimit -m) "rtprio": maximum real-time scheduling priority (ulimit -r) "rttime": maximum amount of real-time execution between blocking syscalls "sigpending": maximum number of pending signals (ulimit -i) "stack": maximum stack size (ulimit -s) **--userns** *how* Sets the configuration for user namespaces when handling `RUN` instructions. The configured value can be "" (the empty string) or "container" to indicate that a new user namespace should be created, it can be "host" to indicate that the user namespace in which `buildah` itself is being run should be reused, or it can be the path to an user namespace which is already in use by another process. **--userns-uid-map** *mapping* Directly specifies a UID mapping which should be used to set ownership, at the filesytem level, on the working container's contents. Commands run when handling `RUN` instructions will default to being run in their own user namespaces, configured using the UID and GID maps. Entries in this map take the form of one or more triples of a starting in-container UID, a corresponding starting host-level UID, and the number of consecutive IDs which the map entry represents. This option overrides the *remap-uids* setting in the *options* section of /etc/containers/storage.conf. If this option is not specified, but a global --userns-uid-map setting is supplied, settings from the global option will be used. If none of --userns-uid-map-user, --userns-gid-map-group, or --userns-uid-map are specified, but --userns-gid-map is specified, the UID map will be set to use the same numeric values as the GID map. **--userns-gid-map** *mapping* Directly specifies a GID mapping which should be used to set ownership, at the filesytem level, on the working container's contents. Commands run when handling `RUN` instructions will default to being run in their own user namespaces, configured using the UID and GID maps. Entries in this map take the form of one or more triples of a starting in-container GID, a corresponding starting host-level GID, and the number of consecutive IDs which the map entry represents. This option overrides the *remap-gids* setting in the *options* section of /etc/containers/storage.conf. If this option is not specified, but a global --userns-gid-map setting is supplied, settings from the global option will be used. If none of --userns-uid-map-user, --userns-gid-map-group, or --userns-gid-map are specified, but --userns-uid-map is specified, the GID map will be set to use the same numeric values as the UID map. **--userns-uid-map-user** *user* Specifies that a UID mapping which should be used to set ownership, at the filesytem level, on the working container's contents, can be found in entries in the `/etc/subuid` file which correspond to the specified user. Commands run when handling `RUN` instructions will default to being run in their own user namespaces, configured using the UID and GID maps. If --userns-gid-map-group is specified, but --userns-uid-map-user is not specified, `buildah` will assume that the specified group name is also a suitable user name to use as the default setting for this option. **--userns-gid-map-group** *group* Specifies that a GID mapping which should be used to set ownership, at the filesytem level, on the working container's contents, can be found in entries in the `/etc/subgid` file which correspond to the specified group. Commands run when handling `RUN` instructions will default to being run in their own user namespaces, configured using the UID and GID maps. If --userns-uid-map-user is specified, but --userns-gid-map-group is not specified, `buildah` will assume that the specified user name is also a suitable group name to use as the default setting for this option. **--uts** *how* Sets the configuration for UTS namespaces when the handling `RUN` instructions. The configured value can be "" (the empty string) or "container" to indicate that a new UTS namespace should be created, or it can be "host" to indicate that the UTS namespace in which `buildah` itself is being run should be reused, or it can be the path to a UTS namespace which is already in use by another process. **--volume, -v**[=*[HOST-DIR:CONTAINER-DIR[:OPTIONS]]*] Create a bind mount. If you specify, ` -v /HOST-DIR:/CONTAINER-DIR`, podman bind mounts `/HOST-DIR` in the host to `/CONTAINER-DIR` in the podman container. The `OPTIONS` are a comma delimited list and can be: * [rw|ro] * [z|Z] * [`[r]shared`|`[r]slave`|`[r]private`] The `CONTAINER-DIR` must be an absolute path such as `/src/docs`. The `HOST-DIR` must be an absolute path as well. Podman bind-mounts the `HOST-DIR` to the path you specify. For example, if you supply `/foo` as the host path, Podman copies the contents of `/foo` to the container filesystem on the host and bind mounts that into the container. You can specify multiple **-v** options to mount one or more mounts to a container. You can add the `:ro` or `:rw` suffix to a volume to mount it read-only or read-write mode, respectively. By default, the volumes are mounted read-write. See examples. Labeling systems like SELinux require that proper labels are placed on volume content mounted into a container. Without a label, the security system might prevent the processes running inside the container from using the content. By default, podman does not change the labels set by the OS. To change a label in the container context, you can add either of two suffixes `:z` or `:Z` to the volume mount. These suffixes tell podman to relabel file objects on the shared volumes. The `z` option tells podman that two containers share the volume content. As a result, podman labels the content with a shared content label. Shared volume labels allow all containers to read/write content. The `Z` option tells podman to label the content with a private unshared label. Only the current container can use a private volume. By default bind mounted volumes are `private`. That means any mounts done inside container will not be visible on the host and vice versa. This behavior can be changed by specifying a volume mount propagation property. When the mount propagation policy is set to `shared`, any mounts completed inside the container on that volume will be visible to both the host and container. When the mount propagation policy is set to `slave`, one way mount propagation is enabled and any mounts completed on the host for that volume will be visible only inside of the container. To control the mount propagation property of volume use the `:[r]shared`, `:[r]slave` or `:[r]private` propagation flag. The propagation property can be specified only for bind mounted volumes and not for internal volumes or named volumes. For mount propagation to work on the source mount point (mount point where source dir is mounted on) has to have the right propagation properties. For shared volumes, the source mount point has to be shared. And for slave volumes, the source mount has to be either shared or slave. Use `df ` to determine the source mount and then use `findmnt -o TARGET,PROPAGATION ` to determine propagation properties of source mount, if `findmnt` utility is not available, the source mount point can be determined by looking at the mount entry in `/proc/self/mountinfo`. Look at `optional fields` and see if any propagaion properties are specified. `shared:X` means the mount is `shared`, `master:X` means the mount is `slave` and if nothing is there that means the mount is `private`. To change propagation properties of a mount point use the `mount` command. For example, to bind mount the source directory `/foo` do `mount --bind /foo /foo` and `mount --make-private --make-shared /foo`. This will convert /foo into a `shared` mount point. The propagation properties of the source mount can be changed directly. For instance if `/` is the source mount for `/foo`, then use `mount --make-shared /` to convert `/` into a `shared` mount. ## EXAMPLES ### Build an image using local Dockerfiles podman build . podman build -f Dockerfile.simple . cat ~/Dockerfile | podman build -f - . podman build -f Dockerfile.simple -f Dockerfile.notsosimple . podman build -f Dockerfile.in ~ podman build -t imageName . podman build --tls-verify=true -t imageName -f Dockerfile.simple . podman build --tls-verify=false -t imageName . podman build --runtime-flag log-format=json . podman build --runtime-flag debug . podman build --authfile /tmp/auths/myauths.json --cert-dir ~/auth --tls-verify=true --creds=username:password -t imageName -f Dockerfile.simple . podman build --memory 40m --cpu-period 10000 --cpu-quota 50000 --ulimit nofile=1024:1028 -t imageName . podman build --security-opt label=level:s0:c100,c200 --cgroup-parent /path/to/cgroup/parent -t imageName . podman build --volume /home/test:/myvol:ro,Z -t imageName . podman build --layers -t imageName . podman build --no-cache -t imageName . podman build --layers --force-rm -t imageName . podman build --no-cache --rm=false -t imageName . ### Building an image using a URL, Git repo, or archive The build context directory can be specified as a URL to a Dockerfile, a Git repository, or URL to an archive. If the URL is a Dockerfile, it is downloaded to a temporary location and used as the context. When a Git repository is set as the URL, the repository is cloned locally to a temporary location and then used as the context. Lastly, if the URL is an archive, it is downloaded to a temporary location and extracted before being used as the context. #### Building an image using a URL to a Dockerfile Podman will download the Dockerfile to a temporary location and then use it as the build context. `podman build https://10.10.10.1/podman/Dockerfile` #### Building an image using a Git repository Podman will clone the specified GitHub repository to a temporary location and use it as the context. The Dockerfile at the root of the repository will be used and it only works if the GitHub repository is a dedicated repository. `podman build git://github.com/scollier/purpletest` #### Building an image using a URL to an archive Podman will fetch the archive file, decompress it, and use its contents as the build context. The Dockerfile at the root of the archive and the rest of the archive will get used as the context of the build. If you pass `-f PATH/Dockerfile` option as well, the system will look for that file inside the contents of the archive. `podman build -f dev/Dockerfile https://10.10.10.1/podman/context.tar.gz` Note: supported compression formats are 'xz', 'bzip2', 'gzip' and 'identity' (no compression). ## Files **registries.conf** (`/etc/containers/registries.conf`) registries.conf is the configuration file which specifies which container registries should be consulted when completing image names which do not include a registry or domain portion. ## SEE ALSO podman(1), buildah(1), containers-registries.conf(5) ## HISTORY * December 2017, Originally compiled by Tom Sweeney * May 2018, Minor revisions added by Joe Doss