![PODMAN logo](logo/podman-logo-source.svg) # Troubleshooting ## A list of common issues and solutions for Podman --- ### 1) Variety of issues - Validate Version A large number of issues reported against Podman are often found to already be fixed in more current versions of the project. Before reporting an issue, please verify the version you are running with `podman version` and compare it to the latest release documented on the top of Podman's [README.md](README.md). If they differ, please update your version of PODMAN to the latest possible and retry your command before reporting the issue. --- ### 2) Can't use volume mount, get permission denied $ podman run -v ~/mycontent:/content fedora touch /content/file touch: cannot touch '/content/file': Permission denied #### Solution This is usually caused by SELinux. Labeling systems like SELinux require that proper labels are placed on volume content mounted into a container. Without a label, the security system might prevent the processes running inside the container from using the content. By default, Podman does not change the labels set by the OS. To change a label in the container context, you can add either of two suffixes **:z** or **:Z** to the volume mount. These suffixes tell Podman to relabel file objects on the shared volumes. The **z** option tells Podman that two containers share the volume content. As a result, Podman labels the content with a shared content label. Shared volume labels allow all containers to read/write content. The **Z** option tells Podman to label the content with a private unshared label. Only the current container can use a private volume. $ podman run -v ~/mycontent:/content:Z fedora touch /content/file Make sure the content is private for the container. Do not relabel system directories and content. Relabeling system content might cause other confined services on your machine to fail. For these types of containers we recommend that disable SELinux separation. The option `--security-opt label=disable` will disable SELinux separation for the container. $ podman run --security-opt label=disable -v ~:/home/user fedora touch /home/user/file --- ### 3) No such image or Bare keys cannot contain ':' When doing a `podman pull` or `podman build` command and a "common" image cannot be pulled, it is likely that the `/etc/containers/registries.conf` file is either not installed or possibly misconfigured. #### Symptom ```console $ sudo podman build -f Dockerfile STEP 1: FROM alpine error building: error creating build container: no such image "alpine" in registry: image not known ``` or ```console $ sudo podman pull fedora error pulling image "fedora": unable to pull fedora: error getting default registries to try: Near line 9 (last key parsed ''): Bare keys cannot contain ':'. ``` #### Solution * Verify that the `/etc/containers/registries.conf` file exists. If not, verify that the containers-common package is installed. * Verify that the entries in the `[registries.search]` section of the /etc/containers/registries.conf file are valid and reachable. * i.e. `registries = ['registry.fedoraproject.org', 'quay.io', 'registry.access.redhat.com']` --- ### 4) http: server gave HTTP response to HTTPS client When doing a Podman command such as `build`, `commit`, `pull`, or `push` to a registry, tls verification is turned on by default. If authentication is not used with those commands, this error can occur. #### Symptom ```console $ sudo podman push alpine docker://localhost:5000/myalpine:latest Getting image source signatures Get https://localhost:5000/v2/: http: server gave HTTP response to HTTPS client ``` #### Solution By default tls verification is turned on when communicating to registries from Podman. If the registry does not require authentication the Podman commands such as `build`, `commit`, `pull` and `push` will fail unless tls verification is turned off using the `--tls-verify` option. **NOTE:** It is not at all recommended to communicate with a registry and not use tls verification. * Turn off tls verification by passing false to the tls-verification option. * I.e. `podman push --tls-verify=false alpine docker://localhost:5000/myalpine:latest` --- ### 5) rootless containers cannot ping hosts When using the ping command from a non-root container, the command may fail because of a lack of privileges. #### Symptom ```console $ podman run --rm fedora ping -W10 -c1 redhat.com PING redhat.com (209.132.183.105): 56 data bytes --- redhat.com ping statistics --- 1 packets transmitted, 0 packets received, 100% packet loss ``` #### Solution It is most likely necessary to enable unprivileged pings on the host. Be sure the UID of the user is part of the range in the `/proc/sys/net/ipv4/ping_group_range` file. To change its value you can use something like: `sysctl -w "net.ipv4.ping_group_range=0 2000000"`. To make the change persistent, you'll need to add a file in `/etc/sysctl.d` that contains `net.ipv4.ping_group_range=0 $MAX_UID`. --- ### 6) Build hangs when the Dockerfile contains the useradd command When the Dockerfile contains a command like `RUN useradd -u 99999000 -g users newuser` the build can hang. #### Symptom If you are using a useradd command within a Dockerfile with a large UID/GID, it will create a large sparse file `/var/log/lastlog`. This can cause the build to hang forever. Go language does not support sparse files correctly, which can lead to some huge files being created in your container image. #### Solution If the entry in the Dockerfile looked like: RUN useradd -u 99999000 -g users newuser then add the `--no-log-init` parameter to change it to: `RUN useradd --no-log-init -u 99999000 -g users newuser`. This option tells useradd to stop creating the lastlog file. ### 7) Permission denied when running Podman commands When rootless Podman attempts to execute a container on a non exec home directory a permission error will be raised. #### Symptom If you are running Podman or buildah on a home directory that is mounted noexec, then they will fail. With a message like: ``` podman run centos:7 standard_init_linux.go:203: exec user process caused "permission denied" ``` #### Solution Since the administrator of the system setup your home directory to be noexec, you will not be allowed to execute containers from storage in your home directory. It is possible to work around this by manually specifying a container storage path that is not on a noexec mount. Simply copy the file /etc/containers/storage.conf to ~/.config/containers/ (creating the directory if necessary). Specify a graphroot directory which is not on a noexec mount point and to which you have read/write privileges. You will need to modify other fields to writable directories as well. For example ``` cat ~/.config/containers/storage.conf [storage] driver = "overlay" runroot = "/run/user/1000" graphroot = "/execdir/myuser/storage" [storage.options] mount_program = "/bin/fuse-overlayfs" ``` ### 8) Permission denied when running systemd within a Podman container When running systemd as PID 1 inside of a container on an SELinux separated machine, it needs to write to the cgroup file system. #### Symptom Systemd gets permission denied when attempting to write to the cgroup file system, and AVC messages start to show up in the audit.log file or journal on the system. #### Solution Newer versions of Podman (2.0 or greater) support running init based containers with a different SELinux labels, which allow the container process access to the cgroup file system. This feature requires container-selinux-2.132 or newer versions. Prior to Podman 2.0, the SELinux boolean `container_manage_cgroup` allows container processes to write to the cgroup file system. Turn on this boolean, on SELinux separated systems, to allow systemd to run properly in the container. Only do this on systems running older versions of Podman. `setsebool -P container_manage_cgroup true` ### 9) Newuidmap missing when running rootless Podman commands Rootless Podman requires the newuidmap and newgidmap programs to be installed. #### Symptom If you are running Podman or buildah as a not root user, you get an error complaining about a missing newuidmap executable. ``` podman run -ti fedora sh cannot find newuidmap: exec: "newuidmap": executable file not found in $PATH ``` #### Solution Install a version of shadow-utils that includes these executables. Note that for RHEL and CentOS 7, at least the 7.7 release must be installed for support to be available. ### 10) rootless setup user: invalid argument Rootless Podman requires the user running it to have a range of UIDs listed in /etc/subuid and /etc/subgid. #### Symptom An user, either via --user or through the default configured for the image, is not mapped inside the namespace. ``` podman run --rm -ti --user 1000000 alpine echo hi Error: container create failed: container_linux.go:344: starting container process caused "setup user: invalid argument" ``` #### Solution Update the /etc/subuid and /etc/subgid with fields for users that look like: ``` cat /etc/subuid johndoe:100000:65536 test:165536:65536 ``` The format of this file is USERNAME:UID:RANGE * username as listed in /etc/passwd or getpwent. * The initial uid allocated for the user. * The size of the range of UIDs allocated for the user. This means johndoe is allocated UIDS 100000-165535 as well as his standard UID in the /etc/passwd file. You should ensure that each user has a unique range of uids, because overlapping UIDs, would potentially allow one user to attack another user. You could also use the usermod program to assign UIDs to a user. If you update either the /etc/subuid or /etc/subgid file, you need to stop all running containers and kill the pause process. This is done automatically by the `system migrate` command, which can also be used to stop all the containers and kill the pause process. ``` usermod --add-subuids 200000-201000 --add-subgids 200000-201000 johndoe grep johndoe /etc/subuid /etc/subgid /etc/subuid:johndoe:200000:1001 /etc/subgid:johndoe:200000:1001 ``` ### 11) Changing the location of the Graphroot leads to permission denied When I change the graphroot storage location in storage.conf, the next time I run Podman I get an error like: ``` # podman run -p 5000:5000 -it centos bash bash: error while loading shared libraries: /lib64/libc.so.6: cannot apply additional memory protection after relocation: Permission denied ``` For example, the admin sets up a spare disk to be mounted at `/src/containers`, and points storage.conf at this directory. #### Symptom SELinux blocks containers from using random locations for overlay storage. These directories need to be labeled with the same labels as if the content was under /var/lib/containers/storage. #### Solution Tell SELinux about the new containers storage by setting up an equivalence record. This tells SELinux to label content under the new path, as if it was stored under `/var/lib/containers/storage`. ``` semanage fcontext -a -e /var/lib/containers /srv/containers restorecon -R -v /srv/containers ``` The semanage command above tells SELinux to setup the default labeling of `/srv/containers` to match `/var/lib/containers`. The `restorecon` command tells SELinux to apply the labels to the actual content. Now all new content created in these directories will automatically be created with the correct label. ### 12) Anonymous image pull fails with 'invalid username/password' Pulling an anonymous image that doesn't require authentication can result in an `invalid username/password` error. #### Symptom If you pull an anonymous image, one that should not require credentials, you can receive and `invalid username/password` error if you have credentials established in the authentication file for the target container registry that are no longer valid. ``` podman run -it --rm docker://docker.io/library/alpine:latest ls Trying to pull docker://docker.io/library/alpine:latest...ERRO[0000] Error pulling image ref //alpine:latest: Error determining manifest MIME type for docker://alpine:latest: unable to retrieve auth token: invalid username/password Failed Error: unable to pull docker://docker.io/library/alpine:latest: unable to pull image: Error determining manifest MIME type for docker://alpine:latest: unable to retrieve auth token: invalid username/password ``` This can happen if the authentication file is modified 'by hand' or if the credentials are established locally and then the password is updated later in the container registry. #### Solution Depending upon which container tool was used to establish the credentials, use `podman logout` or `docker logout` to remove the credentials from the authentication file. ### 13) Running Podman inside a container causes container crashes and inconsistent states Running Podman in a container and forwarding some, but not all, of the required host directories can cause inconsistent container behavior. #### Symptom After creating a container with Podman's storage directories mounted in from the host and running Podman inside a container, all containers show their state as "configured" or "created", even if they were running or stopped. #### Solution When running Podman inside a container, it is recommended to mount at a minimum `/var/lib/containers/storage/` as a volume. Typically, you will not mount in the host version of the directory, but if you wish to share containers with the host, you can do so. If you do mount in the host's `/var/lib/containers/storage`, however, you must also mount in the host's `/var/run/libpod` and `/var/run/containers/storage` directories. Not doing this will cause Podman in the container to detect that temporary files have been cleared, leading it to assume a system restart has taken place. This can cause Podman to reset container states and lose track of running containers. For running containers on the host from inside a container, we also recommend the [Podman remote client](remote_client.md), which only requires a single socket to be mounted into the container. ### 14) Rootless 'podman build' fails EPERM on NFS: NFS enforces file creation on different UIDs on the server side and does not understand user namespace, which rootless Podman requires. When a container root process like YUM attempts to create a file owned by a different UID, NFS Server denies the creation. NFS is also a problem for the file locks when the storage is on it. Other distributed file systems (for example: Lustre, Spectrum Scale, the General Parallel File System (GPFS)) are also not supported when running in rootless mode as these file systems do not understand user namespace. #### Symptom ```console $ podman build . ERRO[0014] Error while applying layer: ApplyLayer exit status 1 stdout: stderr: open /root/.bash_logout: permission denied error creating build container: Error committing the finished image: error adding layer with blob "sha256:a02a4930cb5d36f3290eb84f4bfa30668ef2e9fe3a1fb73ec015fc58b9958b17": ApplyLayer exit status 1 stdout: stderr: open /root/.bash_logout: permission denied ``` #### Solution Choose one of the following: * Setup containers/storage in a different directory, not on an NFS share. * Create a directory on a local file system. * Edit `~/.config/containers/containers.conf` and point the `volume_path` option to that local directory. (Copy /usr/share/containers/containers.conf if ~/.config/containers/containers.conf does not exist) * Otherwise just run Podman as root, via `sudo podman` ### 15) Rootless 'podman build' fails when using OverlayFS: The Overlay file system (OverlayFS) requires the ability to call the `mknod` command when creating whiteout files when extracting an image. However, a rootless user does not have the privileges to use `mknod` in this capacity. #### Symptom ```console podman build --storage-driver overlay . STEP 1: FROM docker.io/ubuntu:xenial Getting image source signatures Copying blob edf72af6d627 done Copying blob 3e4f86211d23 done Copying blob 8d3eac894db4 done Copying blob f7277927d38a done Copying config 5e13f8dd4c done Writing manifest to image destination Storing signatures Error: error creating build container: Error committing the finished image: error adding layer with blob "sha256:8d3eac894db4dc4154377ad28643dfe6625ff0e54bcfa63e0d04921f1a8ef7f8": Error processing tar file(exit status 1): operation not permitted $ podman build . ERRO[0014] Error while applying layer: ApplyLayer exit status 1 stdout: stderr: open /root/.bash_logout: permission denied error creating build container: Error committing the finished image: error adding layer with blob "sha256:a02a4930cb5d36f3290eb84f4bfa30668ef2e9fe3a1fb73ec015fc58b9958b17": ApplyLayer exit status 1 stdout: stderr: open /root/.bash_logout: permission denied ``` #### Solution Choose one of the following: * Complete the build operation as a privileged user. * Install and configure fuse-overlayfs. * Install the fuse-overlayfs package for your Linux Distribution. * Add `mount_program = "/usr/bin/fuse-overlayfs"` under `[storage.options]` in your `~/.config/containers/storage.conf` file. ### 16) RHEL 7 and CentOS 7 based `init` images don't work with cgroup v2 The systemd version shipped in RHEL 7 and CentOS 7 doesn't have support for cgroup v2. Support for cgroup V2 requires version 230 of systemd or newer, which was never shipped or supported on RHEL 7 or CentOS 7. #### Symptom ```console sh# podman run --name test -d registry.access.redhat.com/rhel7-init:latest && sleep 10 && podman exec test systemctl status c8567461948439bce72fad3076a91ececfb7b14d469bfa5fbc32c6403185beff Failed to get D-Bus connection: Operation not permitted Error: non zero exit code: 1: OCI runtime error ``` #### Solution You'll need to either: * configure the host to use cgroup v1 ``` On Fedora you can do: # dnf install -y grubby # grubby --update-kernel=ALL --args=”systemd.unified_cgroup_hierarchy=0" # reboot ``` * update the image to use an updated version of systemd. ### 17) rootless containers exit once the user session exits You need to set lingering mode through loginctl to prevent user processes to be killed once the user session completed. #### Symptom Once the user logs out all the containers exit. #### Solution You'll need to either: * loginctl enable-linger $UID or as root if your user has not enough privileges. * sudo loginctl enable-linger $UID ### 18) `podman run` fails with "bpf create: permission denied error" The Kernel Lockdown patches deny eBPF programs when Secure Boot is enabled in the BIOS. [Matthew Garrett's post](https://mjg59.dreamwidth.org/50577.html) describes the relationship between Lockdown and Secure Boot and [Jan-Philip Gehrcke's](https://gehrcke.de/2019/09/running-an-ebpf-program-may-require-lifting-the-kernel-lockdown/) connects this with eBPF. [RH bug 1768125](https://bugzilla.redhat.com/show_bug.cgi?id=1768125) contains some additional details. #### Symptom Attempts to run podman result in ```Error: bpf create : Operation not permitted: OCI runtime permission denied error``` #### Solution One workaround is to disable Secure Boot in your BIOS. ### 20) error creating libpod runtime: there might not be enough IDs available in the namespace Unable to pull images #### Symptom ```console $ podman unshare cat /proc/self/uid_map 0 1000 1 ``` #### Solution ```console $ podman system migrate ``` Original command now returns ``` $ podman unshare cat /proc/self/uid_map 0 1000 1 1 100000 65536 ``` Reference [subuid](http://man7.org/linux/man-pages/man5/subuid.5.html) and [subgid](http://man7.org/linux/man-pages/man5/subgid.5.html) man pages for more detail. ### 20) Passed-in device can't be accessed in rootless container As a non-root user you have group access rights to a device that you want to pass into a rootless container with `--device=...`. #### Symptom Any access inside the container is rejected with "Permission denied". #### Solution The runtime uses `setgroups(2)` hence the process looses all additional groups the non-root user has. If you use the `crun` runtime, 0.10.4 or newer, then you can enable a workaround by adding `--annotation io.crun.keep_original_groups=1` to the `podman` command line. ### 21) A rootless container running in detached mode is closed at logout When running a container with a command like `podman run --detach httpd` as a rootless user, the container is closed upon logout and is not kept running. #### Symptom When logging out of a rootless user session, all containers that were started in detached mode are stopped and are not kept running. As the root user, these same containers would survive the logout and continue running. #### Solution When systemd notes that a session that started a Podman container has exited, it will also stop any containers that has been associated with it. To avoid this, use the following command before logging out: `loginctl enable-linger`. To later revert the linger functionality, use `loginctl disable-linger`. LOGINCTL(1), SYSTEMD(1) ### 22) Containers default detach keys conflict with shell history navigation Podman defaults to `ctrl-p,ctrl-q` to detach from a running containers. The bash and zsh shells default to ctrl-p for the displaying of the previous command. This causes issues when running a shell inside of a container. #### Symptom With the default detach key combo ctrl-p,ctrl-q, shell history navigation (tested in bash and zsh) using ctrl-p to access the previous command will not display this previous command. Or anything else. Conmon is waiting for an additional character to see if the user wants to detach from the container. Adding additional characters to the command will cause it to be displayed along with the additional character. If the user types ctrl-p a second time the shell display the 2nd to last command. #### Solution The solution to this is to change the default detach_keys. For example in order to change the defaults to `ctrl-q,ctrl-q` use the `--detach-keys` option. ``` podman run -ti --detach-keys ctrl-q,ctrl-q fedora sh ``` To make this change the default for all containers, users can modify the containers.conf file. This can be done simply in your home directory, but adding the following lines to users containers.conf ``` $ cat >> ~/.config/containers/containers.conf < _eof [engine] detach_keys="ctrl-q,ctrl-q" _eof ``` In order to effect root running containers and all users, modify the system wide defaults in /etc/containers/containers.conf ### 23) Container with exposed ports won't run in a pod A container with ports that have been published with the `--publish` or `-p` option can not be run within a pod. #### Symptom ``` $ podman pod create --name srcview -p 127.0.0.1:3434:3434 -p 127.0.0.1:7080:7080 -p 127.0.0.1:3370:3370 4b2f4611fa2cbd60b3899b936368c2b3f4f0f68bc8e6593416e0ab8ecb0a3f1d $ podman run --pod srcview --name src-expose -p 3434:3434 -v "${PWD}:/var/opt/localrepo":Z,ro sourcegraph/src-expose:latest serve /var/opt/localrepo Error: cannot set port bindings on an existing container network namespace ``` #### Solution This is a known limitation. If a container will be run within a pod, it is not necessary to publish the port for the containers in the pod. The port must only be published by the pod itself. Pod network stacks act like the network stack on the host - you have a variety of containers in the pod, and programs in the container, all sharing a single interface and IP address, and associated ports. If one container binds to a port, no other container can use that port within the pod while it is in use. Containers in the pod can also communicate over localhost by having one container bind to localhost in the pod, and another connect to that port. In the example from the symptom section, dropping the `-p 3434:3434` would allow the `podman run` command to complete, and the container as part of the pod would still have access to that port. For example: ``` $ podman run --pod srcview --name src-expose -v "${PWD}:/var/opt/localrepo":Z,ro sourcegraph/src-expose:latest serve /var/opt/localrepo ``` ### 24) Podman container images fail with `fuse: device not found` when run Some container images require that the fuse kernel module is loaded in the kernel before they will run with the fuse filesystem in play. #### Symptom When trying to run the container images found at quay.io/podman, quay.io/containers registry.access.redhat.com/ubi8 or other locations, an error will sometimes be returned: ``` ERRO error unmounting /var/lib/containers/storage/overlay/30c058cdadc888177361dd14a7ed7edab441c58525b341df321f07bc11440e68/merged: invalid argument error mounting container "1ae176ca72b3da7c70af31db7434bcf6f94b07dbc0328bc7e4e8fc9579d0dc2e": error mounting build container "1ae176ca72b3da7c70af31db7434bcf6f94b07dbc0328bc7e4e8fc9579d0dc2e": error creating overlay mount to /var/lib/containers/storage/overlay/30c058cdadc888177361dd14a7ed7edab441c58525b341df321f07bc11440e68/merged: using mount program /usr/bin/fuse-overlayfs: fuse: device not found, try 'modprobe fuse' first fuse-overlayfs: cannot mount: No such device : exit status 1 ERRO exit status 1 ``` #### Solution If you encounter a `fuse: device not found` error when running the container image, it is likely that the fuse kernel module has not been loaded on your host system. Use the command `modprobe fuse` to load the module and then run the container image afterwards. To enable this automatically at boot time, you can add a configuration file to `/etc/modules.load.d`. See `man modules-load.d` for more details. ### 25) podman run --rootfs link/to//read/only/dir does not work An error such as "OCI runtime error" on a read-only filesystem or the error "{image} is not an absolute path or is a symlink" are often times indicators for this issue. For more details, review this [issue]( https://github.com/containers/podman/issues/5895). #### Symptom Rootless Podman requires certain files to exist in a file system in order to run. Podman will create /etc/resolv.conf, /etc/hosts and other file descriptors on the rootfs in order to mount volumes on them. #### Solution Run the container once in read/write mode, Podman will generate all of the FDs on the rootfs, and from that point forward you can run with a read-only rootfs. $ podman run --rm --rootfs /path/to/rootfs true The command above will create all the missing directories needed to run the container. After that, it can be used in read only mode, by multiple containers at the same time: $ podman run --read-only --rootfs /path/to/rootfs .... Another option would be to create an overlay file system on the directory as a lower and then then allow podman to create the files on the upper.