aboutsummaryrefslogtreecommitdiff
path: root/docs/source/markdown/podman-run.1.md
diff options
context:
space:
mode:
authorOpenShift Merge Robot <openshift-merge-robot@users.noreply.github.com>2020-11-10 19:12:58 +0100
committerGitHub <noreply@github.com>2020-11-10 19:12:58 +0100
commitca672373b5def7b4aed695622ba560fb407f1bf9 (patch)
tree0b2ac86611b4f5f92bb7e4c13f696599212dc700 /docs/source/markdown/podman-run.1.md
parentce2ac7d2d2413074f9855acbaa7be0b4d5d726e4 (diff)
parent52a869470530f3c6bf7820a2b63fa9e17f227a16 (diff)
downloadpodman-ca672373b5def7b4aed695622ba560fb407f1bf9.tar.gz
podman-ca672373b5def7b4aed695622ba560fb407f1bf9.tar.bz2
podman-ca672373b5def7b4aed695622ba560fb407f1bf9.zip
Merge pull request #8292 from Luap99/doc-anchors
[CI:DOCS] Add anchors for flag names on docs.podman.io
Diffstat (limited to 'docs/source/markdown/podman-run.1.md')
-rw-r--r--docs/source/markdown/podman-run.1.md240
1 files changed, 120 insertions, 120 deletions
diff --git a/docs/source/markdown/podman-run.1.md b/docs/source/markdown/podman-run.1.md
index f655e5d62..61789dc8f 100644
--- a/docs/source/markdown/podman-run.1.md
+++ b/docs/source/markdown/podman-run.1.md
@@ -34,17 +34,17 @@ When running from a user defined network namespace, the _/etc/netns/NSNAME/resol
will be used if it exists, otherwise _/etc/resolv.conf_ will be used.
## OPTIONS
-**--add-host**=_host_:_ip_
+#### **--add-host**=_host_:_ip_
Add a line to container's _/etc/hosts_ for custom host-to-IP mapping.
This option can be set multiple times.
-**--annotation**=_key_=_value_
+#### **--annotation**=_key_=_value_
Add an annotation to the container.
This option can be set multiple times.
-**--attach**, **-a**=**stdin**|**stdout**|**stderr**
+#### **--attach**, **-a**=**stdin**|**stdout**|**stderr**
Attach to STDIN, STDOUT or STDERR.
@@ -55,30 +55,30 @@ error. It can even pretend to be a TTY (this is what most commandline
executables expect) and pass along signals. The **-a** option can be set for
each of **stdin**, **stdout**, and **stderr**.
-**--authfile**[=*path*]
+#### **--authfile**[=*path*]
Path to the authentication file. Default is *${XDG_RUNTIME_DIR}/containers/auth.json*.
Note: You can also override the default path of the authentication file by setting the **REGISTRY_AUTH_FILE**
environment variable.
-**--blkio-weight**=*weight*
+#### **--blkio-weight**=*weight*
Block IO relative weight. The _weight_ is a value between **10** and **1000**.
-**--blkio-weight-device**=*device*:*weight*
+#### **--blkio-weight-device**=*device*:*weight*
Block IO relative device weight.
-**--cap-add**=*capability*
+#### **--cap-add**=*capability*
Add Linux capabilities.
-**--cap-drop**=*capability*
+#### **--cap-drop**=*capability*
Drop Linux capabilities.
-**--cgroupns**=*mode*
+#### **--cgroupns**=*mode*
Set the cgroup namespace mode for the container.
@@ -89,7 +89,7 @@ Set the cgroup namespace mode for the container.
If the host uses cgroups v1, the default is set to **host**. On cgroups v2, the default is **private**.
-**--cgroups**=**enabled**|**disabled**|**no-conmon**|**split**
+#### **--cgroups**=**enabled**|**disabled**|**no-conmon**|**split**
Determines whether the container will create CGroups.
@@ -100,23 +100,23 @@ The **disabled** option will force the container to not create CGroups, and thus
The **no-conmon** option disables a new CGroup only for the **conmon** process.
The **split** option splits the current cgroup in two sub-cgroups: one for conmon and one for the container payload. It is not possible to set **--cgroup-parent** with **split**.
-**--cgroup-parent**=*path*
+#### **--cgroup-parent**=*path*
Path to cgroups under which the cgroup for the container will be created. If the path is not absolute, the path is considered to be relative to the cgroups path of the init process. Cgroups will be created if they do not already exist.
-**--cgroup-conf**=*KEY=VALUE*
+#### **--cgroup-conf**=*KEY=VALUE*
When running on cgroup v2, specify the cgroup file to write to and its value. For example **--cgroup-conf=memory.high=1073741824** sets the memory.high limit to 1GB.
-**--cidfile**=*file*
+#### **--cidfile**=*file*
Write the container ID to *file*.
-**--conmon-pidfile**=*file*
+#### **--conmon-pidfile**=*file*
Write the pid of the **conmon** process to a file. As **conmon** runs in a separate process than Podman, this is necessary when using systemd to restart Podman containers.
-**--cpu-period**=*limit*
+#### **--cpu-period**=*limit*
Set the CPU period for the Completely Fair Scheduler (CFS), which is a
duration in microseconds. Once the container's CPU quota is used up, it will
@@ -127,7 +127,7 @@ On some systems, changing the CPU limits may not be allowed for non-root
users. For more details, see
https://github.com/containers/podman/blob/master/troubleshooting.md#26-running-containers-with-cpu-limits-fails-with-a-permissions-error
-**--cpu-quota**=*limit*
+#### **--cpu-quota**=*limit*
Limit the CPU Completely Fair Scheduler (CFS) quota.
@@ -140,13 +140,13 @@ On some systems, changing the CPU limits may not be allowed for non-root
users. For more details, see
https://github.com/containers/podman/blob/master/troubleshooting.md#26-running-containers-with-cpu-limits-fails-with-a-permissions-error
-**--cpu-rt-period**=*microseconds*
+#### **--cpu-rt-period**=*microseconds*
Limit the CPU real-time period in microseconds.
Limit the container's Real Time CPU usage. This flag tell the kernel to restrict the container's Real Time CPU usage to the period you specify.
-**--cpu-rt-runtime**=*microseconds*
+#### **--cpu-rt-runtime**=*microseconds*
Limit the CPU real-time runtime in microseconds.
@@ -155,7 +155,7 @@ Period of 1,000,000us and Runtime of 950,000us means that this container could c
The sum of all runtimes across containers cannot exceed the amount allotted to the parent cgroup.
-**--cpu-shares**=*shares*
+#### **--cpu-shares**=*shares*
CPU shares (relative weight).
@@ -190,30 +190,30 @@ division of CPU shares:
| 101 | {C1} | 1 | 100% of CPU1 |
| 102 | {C1} | 2 | 100% of CPU2 |
-**--cpus**=*number*
+#### **--cpus**=*number*
Number of CPUs. The default is *0.0* which means no limit. This is shorthand
for **--cpu-period** and **--cpu-quota**, so you may only set either
-**--cpus** or **--cpu-period** and **--cpu-quota**.
+#### **--cpus** or **--cpu-period** and **--cpu-quota**.
On some systems, changing the CPU limits may not be allowed for non-root
users. For more details, see
https://github.com/containers/podman/blob/master/troubleshooting.md#26-running-containers-with-cpu-limits-fails-with-a-permissions-error
-**--cpuset-cpus**=*number*
+#### **--cpuset-cpus**=*number*
CPUs in which to allow execution. Can be specified as a comma-separated list
(e.g. **0,1**), as a range (e.g. **0-3**), or any combination thereof
(e.g. **0-3,7,11-15**).
-**--cpuset-mems**=*nodes*
+#### **--cpuset-mems**=*nodes*
Memory nodes (MEMs) in which to allow execution. Only effective on NUMA systems.
For example, if you have four memory nodes (0-3) on your system, use **--cpuset-mems=0,1**
to only use memory from the first two memory nodes.
-**--detach**, **-d**=**true**|**false**
+#### **--detach**, **-d**=**true**|**false**
Detached mode: run the container in the background and print the new container ID. The default is *false*.
@@ -226,7 +226,7 @@ running) using a configurable key sequence. The default sequence is `ctrl-p,ctrl
Configure the keys sequence using the **--detach-keys** option, or specifying
it in the **containers.conf** file: see **containers.conf(5)** for more information.
-**--detach-keys**=*sequence*
+#### **--detach-keys**=*sequence*
Specify the key sequence for detaching a container. Format is a single character `[a-Z]` or one or more `ctrl-<value>` characters where `<value>` is one of: `a-z`, `@`, `^`, `[`, `,` or `_`. Specifying "" will disable this feature. The default is *ctrl-p,ctrl-q*.
@@ -234,7 +234,7 @@ This option can also be set in **containers.conf**(5) file.
Specifying "" will disable this feature. The default is **ctrl-p,ctrl-q**.
-**--device**=_host-device_[**:**_container-device_][**:**_permissions_]
+#### **--device**=_host-device_[**:**_container-device_][**:**_permissions_]
Add a host device to the container. Optional *permissions* parameter
can be used to specify device permissions, it is combination of
@@ -253,33 +253,33 @@ Podman may load kernel modules required for using the specified
device. The devices that podman will load modules when necessary are:
/dev/fuse.
-**--device-cgroup-rule**=rule
+#### **--device-cgroup-rule**=rule
Add a rule to the cgroup allowed devices list
-**--device-read-bps**=_path_:_rate_
+#### **--device-read-bps**=_path_:_rate_
Limit read rate (in bytes per second) from a device (e.g. **--device-read-bps=/dev/sda:1mb**).
-**--device-read-iops**=_path_:_rate_
+#### **--device-read-iops**=_path_:_rate_
Limit read rate (in IO operations per second) from a device (e.g. **--device-read-iops=/dev/sda:1000**).
-**--device-write-bps**=_path_:_rate_
+#### **--device-write-bps**=_path_:_rate_
Limit write rate (in bytes per second) to a device (e.g. **--device-write-bps=/dev/sda:1mb**).
-**--device-write-iops**=_path_:_rate_
+#### **--device-write-iops**=_path_:_rate_
Limit write rate (in IO operations per second) to a device (e.g. **--device-write-iops=/dev/sda:1000**).
-**--disable-content-trust**
+#### **--disable-content-trust**
This is a Docker specific option to disable image verification to a Docker
registry and is not supported by Podman. This flag is a NOOP and provided
solely for scripting compatibility.
-**--dns**=*ipaddr*
+#### **--dns**=*ipaddr*
Set custom DNS servers. Invalid if using **--dns** with **--network** that is set to **none** or **container:**_id_.
@@ -291,16 +291,16 @@ is the case the **--dns** flags is necessary for every run.
The special value **none** can be specified to disable creation of _/etc/resolv.conf_ in the container by Podman.
The _/etc/resolv.conf_ file in the image will be used without changes.
-**--dns-opt**=*option*
+#### **--dns-opt**=*option*
Set custom DNS options. Invalid if using **--dns-opt** with **--network** that is set to **none** or **container:**_id_.
-**--dns-search**=*domain*
+#### **--dns-search**=*domain*
Set custom DNS search domains. Invalid if using **--dns-search** and **--network** that is set to **none** or **container:**_id_.
Use **--dns-search=.** if you don't wish to set the search domain.
-**--entrypoint**=*"command"* | *'["command", "arg1", ...]'*
+#### **--entrypoint**=*"command"* | *'["command", "arg1", ...]'*
Overwrite the default ENTRYPOINT of the image.
@@ -318,7 +318,7 @@ ENTRYPOINT.
You need to specify multi option commands in the form of a json string.
-**--env**, **-e**=*env*
+#### **--env**, **-e**=*env*
Set environment variables.
@@ -326,30 +326,30 @@ This option allows arbitrary environment variables that are available for the pr
See [**Environment**](#environment) note below for precedence and examples.
-**--env-host**=**true**|**false**
+#### **--env-host**=**true**|**false**
Use host environment inside of the container. See **Environment** note below for precedence. (Not available for remote commands)
-**--env-file**=*file*
+#### **--env-file**=*file*
Read in a line delimited file of environment variables. See **Environment** note below for precedence.
-**--expose**=*port*
+#### **--expose**=*port*
Expose a port, or a range of ports (e.g. **--expose=3300-3310**) to set up port redirection
on the host system.
-**--gidmap**=*container_gid*:*host_gid*:*amount*
+#### **--gidmap**=*container_gid*:*host_gid*:*amount*
Run the container in a new user namespace using the supplied mapping. This option conflicts with the **--userns** and **--subgidname** flags.
This option can be passed several times to map different ranges. If calling **podman run** as an unprivileged user, the user needs to have the right to use the mapping. See **subuid**(5).
The example maps gids **0-1999** in the container to the gids **30000-31999** on the host: **--gidmap=0:30000:2000**.
-**--group-add**=*group*
+#### **--group-add**=*group*
Add additional groups to run as
-**--health-cmd**=*"command"* | *'["command", "arg1", ...]'*
+#### **--health-cmd**=*"command"* | *'["command", "arg1", ...]'*
Set or alter a healthcheck command for a container. The command is a command to be executed inside your
container that determines your container health. The command is required for other healthcheck options
@@ -358,25 +358,25 @@ to be applied. A value of **none** disables existing healthchecks.
Multiple options can be passed in the form of a JSON array; otherwise, the command will be interpreted
as an argument to **/bin/sh -c**.
-**--health-interval**=*interval*
+#### **--health-interval**=*interval*
Set an interval for the healthchecks. An _interval_ of **disable** results in no automatic timer setup. The default is **30s**.
-**--health-retries**=*retries*
+#### **--health-retries**=*retries*
The number of retries allowed before a healthcheck is considered to be unhealthy. The default value is **3**.
-**--health-start-period**=*period*
+#### **--health-start-period**=*period*
The initialization time needed for a container to bootstrap. The value can be expressed in time format like
**2m3s**. The default value is **0s**.
-**--health-timeout**=*timeout*
+#### **--health-timeout**=*timeout*
The maximum time allowed to complete the healthcheck before an interval is considered failed. Like start-period, the
value can be expressed in a time format such as **1m22s**. The default value is **30s**.
-**--help**
+#### **--help**
Print usage statement
@@ -386,7 +386,7 @@ Container host name
Sets the container host name that is available inside the container. Can only be used with a private UTS namespace `--uts=private` (default). If `--pod` is specified and the pod shares the UTS namespace (default) the pods hostname will be used.
-**--http-proxy**=**true**|**false**
+#### **--http-proxy**=**true**|**false**
By default proxy environment variables are passed into the container if set
for the Podman process. This can be disabled by setting the value to **false**.
@@ -401,7 +401,7 @@ proxy environment at container build time.) (Not available for remote commands)
Defaults to **true**.
-**--image-volume**, **builtin-volume**=**bind**|**tmpfs**|**ignore**
+#### **--image-volume**, **builtin-volume**=**bind**|**tmpfs**|**ignore**
Tells Podman how to handle the builtin image volumes. Default is **bind**.
@@ -410,30 +410,30 @@ Tells Podman how to handle the builtin image volumes. Default is **bind**.
content that disappears when the container is stopped.
- **ignore**: All volumes are just ignored and no action is taken.
-**--init**
+#### **--init**
Run an init inside the container that forwards signals and reaps processes.
-**--init-path**=*path*
+#### **--init-path**=*path*
Path to the container-init binary.
-**--interactive**, **-i**=**true**|**false**
+#### **--interactive**, **-i**=**true**|**false**
When set to **true**, keep stdin open even if not attached. The default is **false**.
-**--ip6**=*ip*
+#### **--ip6**=*ip*
Not implemented.
-**--ip**=*ip*
+#### **--ip**=*ip*
Specify a static IP address for the container, for example **10.88.64.128**.
This option can only be used if the container is joined to only a single network - i.e., `--network=_network-name_` is used at most once
and if the container is not joining another container's network namespace via `--network=container:_id_`.
The address must be within the CNI network's IP address pool (default **10.88.0.0/16**).
-**--ipc**=*mode*
+#### **--ipc**=*mode*
Set the IPC namespace mode for a container. The default is to create
a private IPC namespace.
@@ -442,7 +442,7 @@ a private IPC namespace.
- **host**: use the host shared memory,semaphores and message queues inside the container. Note: the host mode gives the container full access to local shared memory and is therefore considered insecure.
- **ns:**_path_: path to an IPC namespace to join.
-**--kernel-memory**=_number_[_unit_]
+#### **--kernel-memory**=_number_[_unit_]
Kernel memory limit. A _unit_ can be **b** (bytes), **k** (kilobytes), **m** (megabytes), or **g** (gigabytes).
@@ -452,23 +452,23 @@ is not limited. If you specify a limit, it may be rounded up to a multiple
of the operating system's page size and the value can be very large,
millions of trillions.
-**--label**, **-l**=*key*=*value*
+#### **--label**, **-l**=*key*=*value*
Add metadata to a container.
-**--label-file**=*file*
+#### **--label-file**=*file*
Read in a line-delimited file of labels.
-**--link-local-ip**=*ip*
+#### **--link-local-ip**=*ip*
Not implemented.
-**--log-driver**="*driver*"
+#### **--log-driver**="*driver*"
Logging driver for the container. Currently available options are **k8s-file**, **journald**, and **none**, with **json-file** aliased to **k8s-file** for scripting compatibility.
-**--log-opt**=*name*=*value*
+#### **--log-opt**=*name*=*value*
Logging driver specific options.
@@ -485,7 +485,7 @@ Set custom logging configuration. The following *name*s are supported:
This option is currently supported only by the **journald** log driver.
-**--mac-address**=*address*
+#### **--mac-address**=*address*
Container MAC address (e.g. **92:d0:c6:0a:29:33**).
@@ -493,7 +493,7 @@ Remember that the MAC address in an Ethernet network must be unique.
The IPv6 link-local address will be based on the device's MAC address
according to RFC4862.
-**--memory**, **-m**=_number_[_unit_]
+#### **--memory**, **-m**=_number_[_unit_]
Memory limit. A _unit_ can be **b** (bytes), **k** (kilobytes), **m** (megabytes), or **g** (gigabytes).
@@ -503,7 +503,7 @@ RAM. If a limit of 0 is specified (not using **-m**), the container's memory is
not limited. The actual limit may be rounded up to a multiple of the operating
system's page size (the value would be very large, that's millions of trillions).
-**--memory-reservation**=_number_[_unit_]
+#### **--memory-reservation**=_number_[_unit_]
Memory soft limit. A _unit_ can be **b** (bytes), **k** (kilobytes), **m** (megabytes), or **g** (gigabytes).
@@ -513,7 +513,7 @@ reservation. So you should always set the value below **--memory**, otherwise th
hard limit will take precedence. By default, memory reservation will be the same
as memory limit.
-**--memory-swap**=_number_[_unit_]
+#### **--memory-swap**=_number_[_unit_]
A limit value equal to memory plus swap.
A _unit_ can be **b** (bytes), **k** (kilobytes), **m** (megabytes), or **g** (gigabytes).
@@ -525,11 +525,11 @@ the value of **--memory**.
Set _number_ to **-1** to enable unlimited swap.
-**--memory-swappiness**=*number*
+#### **--memory-swappiness**=*number*
Tune a container's memory swappiness behavior. Accepts an integer between *0* and *100*.
-**--mount**=*type=TYPE,TYPE-SPECIFIC-OPTION[,...]*
+#### **--mount**=*type=TYPE,TYPE-SPECIFIC-OPTION[,...]*
Attach a filesystem mount to the container
@@ -585,7 +585,7 @@ Current supported mount TYPEs are **bind**, **volume**, **image**, **tmpfs** and
ยท notmpcopyup: Disable copying files from the image to the tmpfs.
-**--name**=*name*
+#### **--name**=*name*
Assign a name to the container.
@@ -600,7 +600,7 @@ to the container with **--name** then it will generate a random
string name. The name is useful any place you need to identify a container.
This works for both background and foreground containers.
-**--network**, **--net**=*mode*
+#### **--network**, **--net**=*mode*
Set the network mode for the container. Invalid if using **--dns**, **--dns-opt**, or **--dns-search** with **--network** that is set to **none** or **container:**_id_.
@@ -624,40 +624,40 @@ Valid _mode_ values are:
- **port_handler=rootlesskit**: Use rootlesskit for port forwarding. Default.
- **port_handler=slirp4netns**: Use the slirp4netns port forwarding.
-**--network-alias**=*alias*
+#### **--network-alias**=*alias*
Add network-scoped alias for the container
-**--no-healthcheck**=*true|false*
+#### **--no-healthcheck**=*true|false*
Disable any defined healthchecks for container.
-**--no-hosts**=**true**|**false**
+#### **--no-hosts**=**true**|**false**
Do not create _/etc/hosts_ for the container.
By default, Podman will manage _/etc/hosts_, adding the container's own IP address and any hosts from **--add-host**.
-**--no-hosts** disables this, and the image's _/etc/hosts_ will be preserved unmodified.
+#### **--no-hosts** disables this, and the image's _/etc/hosts_ will be preserved unmodified.
This option conflicts with **--add-host**.
-**--oom-kill-disable**=**true**|**false**
+#### **--oom-kill-disable**=**true**|**false**
Whether to disable OOM Killer for the container or not.
-**--oom-score-adj**=*num*
+#### **--oom-score-adj**=*num*
Tune the host's OOM preferences for containers (accepts values from **-1000** to **1000**).
-**--override-arch**=*ARCH*
+#### **--override-arch**=*ARCH*
Override the architecture, defaults to hosts, of the image to be pulled. For example, `arm`.
-**--override-os**=*OS*
+#### **--override-os**=*OS*
Override the OS, defaults to hosts, of the image to be pulled. For example, `windows`.
-**--override-variant**=*VARIANT*
+#### **--override-variant**=*VARIANT*
Use _VARIANT_ instead of the default architecture variant of the container image. Some images can use multiple variants of the arm architectures, such as arm/v5 and arm/v7.
-**--pid**=*mode*
+#### **--pid**=*mode*
Set the PID namespace mode for the container.
The efault is to create a private PID namespace for the container.
@@ -667,25 +667,25 @@ The efault is to create a private PID namespace for the container.
- **private**: create a new namespace for the container (default)
- **ns:**_path_: join the specified PID namespace.
-**--pids-limit**=*limit*
+#### **--pids-limit**=*limit*
Tune the container's pids limit. Set to **0** to have unlimited pids for the container. The default is **4096** on systems that support "pids" cgroup controller.
-**--pod**=*name*
+#### **--pod**=*name*
Run container in an existing pod. If you want Podman to make the pod for you, prefix the pod name with **new:**.
To make a pod with more granular options, use the **podman pod create** command before creating a container.
If a container is run with a pod, and the pod has an infra-container, the infra-container will be started before the container is.
-**--pod-id-file**=*path*
+#### **--pod-id-file**=*path*
Run container in an existing pod and read the pod's ID from the specified file. If a container is run within a pod, and the pod has an infra-container, the infra-container will be started before the container is.
-**--preserve-fds**=*N*
+#### **--preserve-fds**=*N*
Pass down to the process N additional file descriptors (in addition to 0, 1, 2). The total FDs will be 3+N.
-**--privileged**=**true**|**false**
+#### **--privileged**=**true**|**false**
Give extended privileges to this container. The default is **false**.
@@ -700,7 +700,7 @@ points, Apparmor/SELinux separation, and Seccomp filters are all disabled.
Rootless containers cannot have more privileges than the account that launched them.
-**--publish**, **-p**=_ip_:_hostPort_:_containerPort_ | _ip_::_containerPort_ | _hostPort_:_containerPort_ | _containerPort_
+#### **--publish**, **-p**=_ip_:_hostPort_:_containerPort_ | _ip_::_containerPort_ | _hostPort_:_containerPort_ | _containerPort_
Publish a container's port, or range of ports, to the host.
@@ -723,7 +723,7 @@ associated ports. If one container binds to a port, no other container can use t
within the pod while it is in use. Containers in the pod can also communicate over localhost
by having one container bind to localhost in the pod, and another connect to that port.
-**--publish-all**, **-P**=**true**|**false**
+#### **--publish-all**, **-P**=**true**|**false**
Publish all exposed ports to random ports on the host interfaces. The default is **false**.
@@ -736,7 +736,7 @@ When using this option, Podman will bind any exposed port to a random port on th
within an ephemeral port range defined by */proc/sys/net/ipv4/ip_local_port_range*.
To find the mapping between the host ports and the exposed ports, use **podman port**.
-**--pull**=**always**|**missing**|**never**
+#### **--pull**=**always**|**missing**|**never**
Pull image before running. The default is **missing**.
@@ -744,11 +744,11 @@ Pull image before running. The default is **missing**.
- **always**: Pull the image from the first registry it is found in as listed in registries.conf. Raise an error if not found in the registries, even if the image is present locally.
- **never**: do not pull the image from the registry, use only the local version. Raise an error if the image is not present locally.
-**--quiet**, **-q**
+#### **--quiet**, **-q**
Suppress output information when pulling images
-**--read-only**=**true**|**false**
+#### **--read-only**=**true**|**false**
Mount the container's root filesystem as read only.
@@ -756,15 +756,15 @@ By default a container will have its root filesystem writable allowing processes
to write files anywhere. By specifying the **--read-only** flag, the container will have
its root filesystem mounted as read only prohibiting any writes.
-**--read-only-tmpfs**=**true**|**false**
+#### **--read-only-tmpfs**=**true**|**false**
If container is running in **--read-only** mode, then mount a read-write tmpfs on _/run_, _/tmp_, and _/var/tmp_. The default is **true**.
-**--replace**=**true**|**false**
+#### **--replace**=**true**|**false**
If another container with the same name already exists, replace and remove it. The default is **false**.
-**--restart**=*policy*
+#### **--restart**=*policy*
Restart policy to follow when containers exit.
Restart policy will not take effect if a container is stopped via the **podman kill** or **podman stop** commands.
@@ -780,7 +780,7 @@ Please note that restart will not restart containers after a system reboot.
If this functionality is required in your environment, you can invoke Podman from a **systemd.unit**(5) file, or create an init script for whichever init system is in use.
To generate systemd unit files, please see **podman generate systemd**.
-**--rm**=**true**|**false**
+#### **--rm**=**true**|**false**
Automatically remove the container when it exits. The default is **false**.
@@ -788,12 +788,12 @@ Note that the container will not be removed when it could not be created or
started successfully. This allows the user to inspect the container after
failure.
-**--rmi**=*true|false*
+#### **--rmi**=*true|false*
After exit of the container, remove the image unless another
container is using it. The default is *false*.
-**--rootfs**
+#### **--rootfs**
If specified, the first argument refers to an exploded container on the file system.
@@ -803,7 +803,7 @@ of the container is assumed to be managed externally.
Note: On **SELinux** systems, the rootfs needs the correct label, which is by default
**unconfined_u:object_r:container_file_t**.
-**--sdnotify**=**container**|**conmon**|**ignore**
+#### **--sdnotify**=**container**|**conmon**|**ignore**
Determines how to use the NOTIFY_SOCKET, as passed with systemd and Type=notify.
@@ -814,13 +814,13 @@ has started. The socket is never passed to the runtime or the container.
The **ignore** option removes NOTIFY_SOCKET from the environment for itself and child processes,
for the case where some other process above Podman uses NOTIFY_SOCKET and Podman should not use it.
-**--seccomp-policy**=*policy*
+#### **--seccomp-policy**=*policy*
Specify the policy to select the seccomp profile. If set to *image*, Podman will look for a "io.podman.seccomp.profile" label in the container-image config and use its value as a seccomp profile. Otherwise, Podman will follow the *default* policy by applying the default profile unless specified otherwise via *--security-opt seccomp* as described below.
Note that this feature is experimental and may change in the future.
-**--security-opt**=*option*
+#### **--security-opt**=*option*
Security Options
@@ -840,37 +840,37 @@ Security Options
Note: Labeling can be disabled for all containers by setting **label=false** in the **containers.conf**(5) file.
-**--shm-size**=_number_[_unit_]
+#### **--shm-size**=_number_[_unit_]
Size of _/dev/shm_. A _unit_ can be **b** (bytes), **k** (kilobytes), **m** (megabytes), or **g** (gigabytes).
If you omit the unit, the system uses bytes. If you omit the size entirely, the default is **64m**.
When _size_ is **0**, there is no limit on the amount of memory used for IPC by the container.
-**--sig-proxy**=**true**|**false**
+#### **--sig-proxy**=**true**|**false**
Sets whether the signals sent to the **podman run** command are proxied to the container process. SIGCHLD, SIGSTOP, and SIGKILL are not proxied. The default is **true**.
-**--stop-signal**=*signal*
+#### **--stop-signal**=*signal*
Signal to stop a container. Default is **SIGTERM**.
-**--stop-timeout**=*seconds*
+#### **--stop-timeout**=*seconds*
Timeout to stop a container. Default is **10**.
-**--subgidname**=*name*
+#### **--subgidname**=*name*
Run the container in a new user namespace using the map with _name_ in the _/etc/subgid_ file.
If calling **podman run** as an unprivileged user, the user needs to have the right to use the mapping. See **subgid**(5).
This flag conflicts with **--userns** and **--gidmap**.
-**--subuidname**=*name*
+#### **--subuidname**=*name*
Run the container in a new user namespace using the map with _name_ in the _/etc/subuid_ file.
If calling **podman run** as an unprivileged user, the user needs to have the right to use the mapping. See **subuid**(5).
This flag conflicts with **--userns** and **--uidmap**.
-**--sysctl**=_name_=_value_
+#### **--sysctl**=_name_=_value_
Configure namespaced kernel parameters at runtime.
@@ -894,7 +894,7 @@ For the network namespace, the following ysctls areallowed:
Note: if you use the **--network=host** option, these sysctls will not be allowed.
-**--systemd**=**true**|**false**|**always**
+#### **--systemd**=**true**|**false**|**always**
Run container in systemd mode. The default is **true**.
@@ -923,7 +923,7 @@ The **container_manage_cgroup** boolean must be enabled for this to be allowed o
setsebool -P container_manage_cgroup true
```
-**--tmpfs**=*fs*
+#### **--tmpfs**=*fs*
Create a tmpfs mount.
@@ -938,7 +938,7 @@ options are the same as the Linux default mount flags. If you do not specify
any options, the systems uses the following options:
**rw,noexec,nosuid,nodev**.
-**--tty**, **-t**=**true**|**false**
+#### **--tty**, **-t**=**true**|**false**
Allocate a pseudo-TTY. The default is **false**.
@@ -949,15 +949,15 @@ interactive shell. The default is **false**.
**NOTE**: The **-t** option is incompatible with a redirection of the Podman client
standard input.
-**--tz**=*timezone*
+#### **--tz**=*timezone*
Set timezone in container. This flag takes area-based timezones, GMT time, as well as `local`, which sets the timezone in the container to match the host machine. See `/usr/share/zoneinfo/` for valid timezones.
-**--umask**=*umask*
+#### **--umask**=*umask*
Set the umask inside the container. Defaults to `0022`.
-**--uidmap**=*container_uid*:*host_uid*:*amount*
+#### **--uidmap**=*container_uid*:*host_uid*:*amount*
Run the container in a new user namespace using the supplied mapping. This option conflicts
with the **--userns** and **--subuidname** flags.
@@ -966,11 +966,11 @@ as an unprivileged user, the user needs to have the right to use the mapping. Se
The following example maps uids 0-1999 in the container to the uids 30000-31999 on the host: **--uidmap=0:30000:2000**.
-**--ulimit**=*option*
+#### **--ulimit**=*option*
Ulimit options. You can use **host** to copy the current configuration from the host.
-**--user**, **-u**=[_user_ | _user_:_group_ | _uid_ | _uid_:_gid_ | _user_:_gid_ | _uid_:_group_ ]
+#### **--user**, **-u**=[_user_ | _user_:_group_ | _uid_ | _uid_:_gid_ | _user_:_gid_ | _uid_:_group_ ]
Sets the username or UID used and optionally the groupname or GID for the specified command.
@@ -978,7 +978,7 @@ Without this argument, the command will run as the user specified in the contain
When a user namespace is not in use, the UID and GID used within the container and on the host will match. When user namespaces are in use, however, the UID and GID in the container may correspond to another UID and GID on the host. In rootless containers, for example, a user namespace is always used, and root in the container will by default correspond to the UID and GID of the user invoking Podman.
-**--userns**=**auto**|**host**|**keep-id**|**container:**_id_|**ns:**_namespace_
+#### **--userns**=**auto**|**host**|**keep-id**|**container:**_id_|**ns:**_namespace_
Set the user namespace mode for the container. It defaults to the **PODMAN_USERNS** environment variable. An empty value ("") means user namespaces are disabled unless an explicit mapping is set with they `--uidmapping` and `--gidmapping` options.
@@ -994,7 +994,7 @@ Set the user namespace mode for the container. It defaults to the **PODMAN_USER
This option is incompatible with **--gidmap**, **--uidmap**, **--subuid** and **--subgid**.
-**--uts**=*mode*
+#### **--uts**=*mode*
Set the UTS namespace mode for the container. The following values are supported:
@@ -1003,7 +1003,7 @@ Set the UTS namespace mode for the container. The following values are supported
- **ns:[path]**: run the container in the given existing UTS namespace.
- **container:[container]**: join the UTS namespace of the specified container.
-**--volume**, **-v**[=[[_source-volume_|_host-dir_:]_container-dir_[:_options_]]]
+#### **--volume**, **-v**[=[[_source-volume_|_host-dir_:]_container-dir_[:_options_]]]
Create a bind mount. If you specify _/host-dir_:_/container-dir_, Podman
bind mounts _host-dir_ in the host to _container-dir_ in the Podman
@@ -1141,7 +1141,7 @@ will convert /foo into a shared mount point. Alternatively, one can directly
change propagation properties of source mount. Say, if _/_ is source mount for
_/foo_, then use **mount --make-shared /** to convert _/_ into a shared mount.
-**--volumes-from**[=*CONTAINER*[:*OPTIONS*]]
+#### **--volumes-from**[=*CONTAINER*[:*OPTIONS*]]
Mount volumes from the specified container(s). Used to share volumes between
containers. The *options* is a comma delimited list with the following available elements:
@@ -1174,7 +1174,7 @@ If the location of the volume from the source container overlaps with
data residing on a target container, then the volume hides
that data on the target.
-**--workdir**, **-w**=*dir*
+#### **--workdir**, **-w**=*dir*
Working directory inside the container.
@@ -1400,7 +1400,7 @@ $ podman run --security-opt label=level:TopSecret -i -t rhel7 bash
```
To disable the security labeling for this container versus running with the
-**--permissive** flag, use the following command:
+#### **--permissive** flag, use the following command:
```
$ podman run --security-opt label=disable -i -t fedora bash