Update vendor or containers/buildah

Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>

7 files changed, 63 insertions, 38 deletions

diff --git a/vendor/github.com/klauspost/compress/flate/deflate.go b/vendor/github.com/klauspost/compress/flate/deflate.go
index f8435998e..f00da5b21 100644
--- a/vendor/github.com/klauspost/compress/flate/deflate.go
+++ b/vendor/github.com/klauspost/compress/flate/deflate.go
@@ -131,7 +131,8 @@ func (d *compressor) fillDeflate(b []byte) int {
 	s := d.state
 	if s.index >= 2*windowSize-(minMatchLength+maxMatchLength) {
 		// shift the window by windowSize
-		copy(d.window[:], d.window[windowSize:2*windowSize])
+		//copy(d.window[:], d.window[windowSize:2*windowSize])
+		*(*[windowSize]byte)(d.window) = *(*[windowSize]byte)(d.window[windowSize:])
 		s.index -= windowSize
 		d.windowEnd -= windowSize
 		if d.blockStart >= windowSize {
diff --git a/vendor/github.com/klauspost/compress/flate/dict_decoder.go b/vendor/github.com/klauspost/compress/flate/dict_decoder.go
index 71c75a065..bb36351a5 100644
--- a/vendor/github.com/klauspost/compress/flate/dict_decoder.go
+++ b/vendor/github.com/klauspost/compress/flate/dict_decoder.go
@@ -7,19 +7,19 @@ package flate
 // dictDecoder implements the LZ77 sliding dictionary as used in decompression.
 // LZ77 decompresses data through sequences of two forms of commands:
 //
-//	* Literal insertions: Runs of one or more symbols are inserted into the data
-//	stream as is. This is accomplished through the writeByte method for a
-//	single symbol, or combinations of writeSlice/writeMark for multiple symbols.
-//	Any valid stream must start with a literal insertion if no preset dictionary
-//	is used.
+//   - Literal insertions: Runs of one or more symbols are inserted into the data
+//     stream as is. This is accomplished through the writeByte method for a
+//     single symbol, or combinations of writeSlice/writeMark for multiple symbols.
+//     Any valid stream must start with a literal insertion if no preset dictionary
+//     is used.
 //
-//	* Backward copies: Runs of one or more symbols are copied from previously
-//	emitted data. Backward copies come as the tuple (dist, length) where dist
-//	determines how far back in the stream to copy from and length determines how
-//	many bytes to copy. Note that it is valid for the length to be greater than
-//	the distance. Since LZ77 uses forward copies, that situation is used to
-//	perform a form of run-length encoding on repeated runs of symbols.
-//	The writeCopy and tryWriteCopy are used to implement this command.
+//   - Backward copies: Runs of one or more symbols are copied from previously
+//     emitted data. Backward copies come as the tuple (dist, length) where dist
+//     determines how far back in the stream to copy from and length determines how
+//     many bytes to copy. Note that it is valid for the length to be greater than
+//     the distance. Since LZ77 uses forward copies, that situation is used to
+//     perform a form of run-length encoding on repeated runs of symbols.
+//     The writeCopy and tryWriteCopy are used to implement this command.
 //
 // For performance reasons, this implementation performs little to no sanity
 // checks about the arguments. As such, the invariants documented for each
diff --git a/vendor/github.com/klauspost/compress/flate/fast_encoder.go b/vendor/github.com/klauspost/compress/flate/fast_encoder.go
index f781aaa62..cd77a2cc4 100644
--- a/vendor/github.com/klauspost/compress/flate/fast_encoder.go
+++ b/vendor/github.com/klauspost/compress/flate/fast_encoder.go
@@ -104,7 +104,8 @@ func (e *fastGen) addBlock(src []byte) int32 {
 			}
 			// Move down
 			offset := int32(len(e.hist)) - maxMatchOffset
-			copy(e.hist[0:maxMatchOffset], e.hist[offset:])
+			// copy(e.hist[0:maxMatchOffset], e.hist[offset:])
+			*(*[maxMatchOffset]byte)(e.hist) = *(*[maxMatchOffset]byte)(e.hist[offset:])
 			e.cur += offset
 			e.hist = e.hist[:maxMatchOffset]
 		}
diff --git a/vendor/github.com/klauspost/compress/flate/huffman_bit_writer.go b/vendor/github.com/klauspost/compress/flate/huffman_bit_writer.go
index 40ef45c2f..89a5dd89f 100644
--- a/vendor/github.com/klauspost/compress/flate/huffman_bit_writer.go
+++ b/vendor/github.com/klauspost/compress/flate/huffman_bit_writer.go
@@ -265,9 +265,9 @@ func (w *huffmanBitWriter) writeBytes(bytes []byte) {
 // Codes 0-15 are single byte codes. Codes 16-18 are followed by additional
 // information. Code badCode is an end marker
 //
-//  numLiterals      The number of literals in literalEncoding
-//  numOffsets       The number of offsets in offsetEncoding
-//  litenc, offenc   The literal and offset encoder to use
+//	numLiterals      The number of literals in literalEncoding
+//	numOffsets       The number of offsets in offsetEncoding
+//	litenc, offenc   The literal and offset encoder to use
 func (w *huffmanBitWriter) generateCodegen(numLiterals int, numOffsets int, litEnc, offEnc *huffmanEncoder) {
 	for i := range w.codegenFreq {
 		w.codegenFreq[i] = 0
@@ -460,9 +460,9 @@ func (w *huffmanBitWriter) writeOutBits() {
 
 // Write the header of a dynamic Huffman block to the output stream.
 //
-//  numLiterals  The number of literals specified in codegen
-//  numOffsets   The number of offsets specified in codegen
-//  numCodegens  The number of codegens used in codegen
+//	numLiterals  The number of literals specified in codegen
+//	numOffsets   The number of offsets specified in codegen
+//	numCodegens  The number of codegens used in codegen
 func (w *huffmanBitWriter) writeDynamicHeader(numLiterals int, numOffsets int, numCodegens int, isEof bool) {
 	if w.err != nil {
 		return
@@ -790,9 +790,11 @@ func (w *huffmanBitWriter) fillTokens() {
 // and offsetEncoding.
 // The number of literal and offset tokens is returned.
 func (w *huffmanBitWriter) indexTokens(t *tokens, filled bool) (numLiterals, numOffsets int) {
-	copy(w.literalFreq[:], t.litHist[:])
-	copy(w.literalFreq[256:], t.extraHist[:])
-	copy(w.offsetFreq[:], t.offHist[:offsetCodeCount])
+	//copy(w.literalFreq[:], t.litHist[:])
+	*(*[256]uint16)(w.literalFreq[:]) = t.litHist
+	//copy(w.literalFreq[256:], t.extraHist[:])
+	*(*[32]uint16)(w.literalFreq[256:]) = t.extraHist
+	w.offsetFreq = t.offHist
 
 	if t.n == 0 {
 		return
diff --git a/vendor/github.com/klauspost/compress/flate/huffman_code.go b/vendor/github.com/klauspost/compress/flate/huffman_code.go
index 5ac144f28..be7b58b47 100644
--- a/vendor/github.com/klauspost/compress/flate/huffman_code.go
+++ b/vendor/github.com/klauspost/compress/flate/huffman_code.go
@@ -168,13 +168,18 @@ func (h *huffmanEncoder) canReuseBits(freq []uint16) int {
 // The cases of 0, 1, and 2 literals are handled by special case code.
 //
 // list  An array of the literals with non-zero frequencies
-//             and their associated frequencies. The array is in order of increasing
-//             frequency, and has as its last element a special element with frequency
-//             MaxInt32
+//
+//	and their associated frequencies. The array is in order of increasing
+//	frequency, and has as its last element a special element with frequency
+//	MaxInt32
+//
 // maxBits     The maximum number of bits that should be used to encode any literal.
-//             Must be less than 16.
+//
+//	Must be less than 16.
+//
 // return      An integer array in which array[i] indicates the number of literals
-//             that should be encoded in i bits.
+//
+//	that should be encoded in i bits.
 func (h *huffmanEncoder) bitCounts(list []literalNode, maxBits int32) []int32 {
 	if maxBits >= maxBitsLimit {
 		panic("flate: maxBits too large")
diff --git a/vendor/github.com/klauspost/compress/flate/level5.go b/vendor/github.com/klauspost/compress/flate/level5.go
index 4b97576bd..ef6339d95 100644
--- a/vendor/github.com/klauspost/compress/flate/level5.go
+++ b/vendor/github.com/klauspost/compress/flate/level5.go
@@ -191,14 +191,21 @@ func (e *fastEncL5) Encode(dst *tokens, src []byte) {
 
 		// Try to locate a better match by checking the end of best match...
 		if sAt := s + l; l < 30 && sAt < sLimit {
+			// Allow some bytes at the beginning to mismatch.
+			// Sweet spot is 2/3 bytes depending on input.
+			// 3 is only a little better when it is but sometimes a lot worse.
+			// The skipped bytes are tested in Extend backwards,
+			// and still picked up as part of the match if they do.
+			const skipBeginning = 2
 			eLong := e.bTable[hash7(load6432(src, sAt), tableBits)].Cur.offset
-			// Test current
-			t2 := eLong - e.cur - l
-			off := s - t2
+			t2 := eLong - e.cur - l + skipBeginning
+			s2 := s + skipBeginning
+			off := s2 - t2
 			if t2 >= 0 && off < maxMatchOffset && off > 0 {
-				if l2 := e.matchlenLong(s, t2, src); l2 > l {
+				if l2 := e.matchlenLong(s2, t2, src); l2 > l {
 					t = t2
 					l = l2
+					s = s2
 				}
 			}
 		}
diff --git a/vendor/github.com/klauspost/compress/flate/level6.go b/vendor/github.com/klauspost/compress/flate/level6.go
index 62888edf3..85e4b2095 100644
--- a/vendor/github.com/klauspost/compress/flate/level6.go
+++ b/vendor/github.com/klauspost/compress/flate/level6.go
@@ -213,24 +213,33 @@ func (e *fastEncL6) Encode(dst *tokens, src []byte) {
 
 		// Try to locate a better match by checking the end-of-match...
 		if sAt := s + l; sAt < sLimit {
+			// Allow some bytes at the beginning to mismatch.
+			// Sweet spot is 2/3 bytes depending on input.
+			// 3 is only a little better when it is but sometimes a lot worse.
+			// The skipped bytes are tested in Extend backwards,
+			// and still picked up as part of the match if they do.
+			const skipBeginning = 2
 			eLong := &e.bTable[hash7(load6432(src, sAt), tableBits)]
 			// Test current
-			t2 := eLong.Cur.offset - e.cur - l
-			off := s - t2
+			t2 := eLong.Cur.offset - e.cur - l + skipBeginning
+			s2 := s + skipBeginning
+			off := s2 - t2
 			if off < maxMatchOffset {
 				if off > 0 && t2 >= 0 {
-					if l2 := e.matchlenLong(s, t2, src); l2 > l {
+					if l2 := e.matchlenLong(s2, t2, src); l2 > l {
 						t = t2
 						l = l2
+						s = s2
 					}
 				}
 				// Test next:
-				t2 = eLong.Prev.offset - e.cur - l
-				off := s - t2
+				t2 = eLong.Prev.offset - e.cur - l + skipBeginning
+				off := s2 - t2
 				if off > 0 && off < maxMatchOffset && t2 >= 0 {
-					if l2 := e.matchlenLong(s, t2, src); l2 > l {
+					if l2 := e.matchlenLong(s2, t2, src); l2 > l {
 						t = t2
 						l = l2
+						s = s2
 					}
 				}
 			}