aboutsummaryrefslogtreecommitdiff
path: root/contrib/cirrus/runner.sh
Commit message (Collapse)AuthorAge
* Cirrus: Combine build and code consistency tasksChris Evich2022-09-29
| | | | | | | | | | It's conceivable for CI to spend a lot of time testing code which otherwise should be rejected due to quality problems. Previously this was validated in a dedicated task, however a failure would still fail the CI run. Simplify the number of CI tasks by combining the consistency check at the tail-end of the build task. Signed-off-by: Chris Evich <cevich@redhat.com>
* Cirrus: Combine pre-test checks into build taskChris Evich2022-09-29
| | | | | | | | | | | | Previously, two tasks always ran first, prior to anything else. One to verify network and external-service connectivity. Another to verify certain important `.cirrus.yml` standards are met. However, as the total number of tasks continues to grow, the need to keep these basic checks as dedicated prerequisites is of decreasing value/importance. Fold these two checks into a new `pretesting_script` component of the Fedora `build` task, on both `x86_64` and `aarch64`. Signed-off-by: Chris Evich <cevich@redhat.com>
* Cirrus: Add golang code consistency check scriptChris Evich2022-09-26
| | | | | | | | Depends on #15893 Fixes: #15913 Signed-off-by: Chris Evich <cevich@redhat.com>
* Cirrus: Catch use of deprecated io/ioutil packageChris Evich2022-09-23
| | | | | | | | At the time of this commit, there's no easier way to detect this using `golangci-lint` or the go tool (that I could find). A future update to the `go list` command may support detection, for now use a CI script. Signed-off-by: Chris Evich <cevich@redhat.com>
* Cirrus: Update podman-machine commentChris Evich2022-08-15
| | | | | | Replace TODO comment with helpful hint for future maintainers. Signed-off-by: Chris Evich <cevich@redhat.com>
* Cirrus: enable Fedora 36 aarch64 tasks on EC2Lokesh Mandvekar2022-07-27
| | | | | | | | | | | new file: test/e2e/config_arm64.go Tests that fail on aarch64 have been skipped with `skip_if_aarch64`. Co-authored-by: Chris Evich <cevich@redhat.com> Co-authored-by: Ed Santiago <santiago@redhat.com> Signed-off-by: Lokesh Mandvekar <lsm5@fedoraproject.org>
* Bump VMs, to Ubuntu 2204 with cgroups v1Ed Santiago2022-07-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ...and enable the at-test-time confirmation, the one that double-checks that if CI requests runc we actually use runc. This exposed a nasty surprise in our setup: there are steps to define $OCI_RUNTIME, but that's actually a total fakeout! OCI_RUNTIME is used only in e2e tests, it has no effect whatsoever on actual podman itself as invoked via command line such as in system tests. Solution: use containers.conf Given how fragile all this runtime stuff is, I've also added new tests (e2e and system) that will check $CI_DESIRED_RUNTIME. Image source: https://github.com/containers/automation_images/pull/146 Since we haven't actually been testing with runc, we need to fix a few tests: - handle an error-message change (make it work in both crun and runc) - skip one system test, "survive service stop", that doesn't work with runc and I don't think we care. ...and skip a bunch, filing issues for each: - #15013 pod create --share-parent - #15014 timeout in dd - #15015 checkpoint tests time out under $CONTAINER - #15017 networking timeout with registry - #15018 restore --pod gripes about missing --pod - #15025 run --uidmap broken - #15027 pod inspect cgrouppath broken - ...and a bunch more ("podman pause") that probably don't even merit filing an issue. Also, use /dev/urandom in one test (was: /dev/random) because the test is timing out and /dev/urandom does not block. (But the test is still timing out anyway, even with this change) Also, as part of the VM switch we are now using go 1.18 (up from 1.17) and this broke the gitlab tests. Thanks to @Luap99 for a quick fix. Also, slight tweak to #15021: include the timeout value, and reword message so command string is at end. Also, fixed a misspelling in a test name. Fixes: #14833 Signed-off-by: Ed Santiago <santiago@redhat.com>
* [CI:DOCS] Cirrus: Add prominent gitlab warningChris Evich2022-07-21
| | | | | | | It was not obvious enough in the scripts how much of a snowflake this environment is. Fix that with lots of capitalized words and asterisks. Signed-off-by: Chris Evich <cevich@redhat.com>
* CI: sanity check for desired runtimeEd Santiago2022-07-12
| | | | | | | | | | | | | | | We're still not testing runc in CI (#14833), and it may be weeks or months before we can, due to criu/glibc nightmare, but one day we'll be back on track, then later on we'll update VMs again, and screw it up, and lose runc, and not notice, and RHEL will break, and oh noes headless chicken again, repeat repeat. We can do better. Use .cirrus.yml to explicitly define which VMs should use which runtimes, and enforce it early in the CI build step. This should never fail (uh huh) in a PR, only in one of the update-VM PRs. Signed-off-by: Ed Santiago <santiago@redhat.com>
* Cirrus: Add podman-machine integration testChris Evich2022-07-01
| | | | | | | | | | | | | | | | | | | | | | | The podman-machine integration tests are designed to execute on bare-metal, since they perform significant work with virtual-machines. This test is costly to run at scale, so it is limited to being manually triggered by developers (for now). A 'trigger' button will appear in the task status page of the Github WebUI once all test dependencies are met. In the Cirrus-CI WebUI, there is also a 'pre-trigger' button that may be pressed if a developer doesn't wish to wait. Also: * Add a `localmachine` target in the `Makefile` on the off-chance developers wish to execute locally. Update the `ginkgo-run` target to accommodate re-use by the new `localmachine` target. * Exclude `podman_machine` task from `success` dependency verification. This also involves adding an exception to `cirrus_yaml_test.py` otherwise it will complain loudly. * ***NOTE*** Inclusion of `ec2_instance` in *any* task will cause `hack/get_ci_vm.sh` to barf and be non-functional. Future updates will be made to restore functionality. Before then, simply comment out the `ec2_instance` section as a temporarily workaround. Signed-off-by: Chris Evich <cevich@redhat.com>
* logformatter: link to logs using Cirrus APIEd Santiago2022-06-22
| | | | | | | | | | | | | | | | | | | | | One day we may use AWS for part of CI. Do you want to maintain two separate code paths in this script for linking to artifacts in multiple cloud providers? Can you say no? I knew you could. Cirrus already knows the location of the artifacts and provides a transparent mechanism for accessing them. Use it. This PR exposed a nasty bug in our environment-variable handling: envariables passed through to the containerized environment were being double-space-escaped, so "FOO=a b" ended up as "FOO=a\ b" (with a backslash), with one consequence being invalid URLs. The solution is simple: run 'podman -e FOO', not '-e FOO=value'. Finally, reinstate the environment-variable dump (in comments). I had removed this in a moment of panic over leaking secrets, but no, that doesn't happen. Exclude scary-sounding vars anyway. Signed-off-by: Ed Santiago <santiago@redhat.com>
* Makefile: Handle unexpected empty var. valuesChris Evich2022-06-01
| | | | | | | | | | | | | | | | | | Fixes #14021 Substitution values built from `$(shell ...)` output can easily be empty due to the shell's default `pipefail` behavior. This can also hide non-zero exit codes, similarly resulting in empty values being set. While not a perfect fix, the situation is improved by using the `err_if_empty` function in all cases where empty values would be unexpected. Remove the definitions for `GIT_BRANCH` and `GIT_BRANCH_CLEAN` which don't seem to actually be used anywhere (including in code). Add a simple release-test to verify `podman info` outputs a non-empty value for "GitCommit". Signed-off-by: Chris Evich <cevich@redhat.com>
* Cirrus: Fix several TODOsChris Evich2022-05-26
| | | | | | | | Most were simply deleted, the main one addressed is in the "pre-testing" `ext_svc_check.sh` script. It will now verify accessibility of several key test images we maintain in `quay.io`. Signed-off-by: Chris Evich <cevich@redhat.com>
* Fix hang in build-each-commit testEd Santiago2022-05-11
| | | | | | | | | | Followup to #14178: I broke CI. "--fork-point" does not do what I thought it did, so remove it. Also, add 'set -x' to help us debug the next time something like this happens. Signed-off-by: Ed Santiago <santiago@redhat.com>
* bloat check: make more robustEd Santiago2022-05-10
| | | | | | | | | | | | | | | | | | | The use of 'C^' (parent) in 'git rebase' is counterintuitive, at least to me: when C is a merge of multiple commits, rebase picks each of those commits. That probably makes good sense to a git expert, which I'm not. Solution: forget using '^', just calculate the baseline sizes by doing a checkout of the PR's parent. Also: compute PR parent using git-merge-base instead of blindly trusting $DEST_BRANCH (which may be volatile as other PRs are merged). Also: run git-rebase directly, not via make rule. That indirection is too confusing here. Signed-off-by: Ed Santiago <santiago@redhat.com>
* test skipper: check for $DEST_BRANCHEd Santiago2022-05-09
| | | | | | | | | | | | | | The test-skipping optimization is failing as rootless on non-main, because $DEST_BRANCH is not set. Solution: check for envariable, skip test if missing. (This was part of my original PR, but was accidentally removed in #14013) Also: DEST_BRANCH was silently being defaulted to 'main' in lib.sh. Remove that: per @cevich, it is no longer necessary. Fixes: #14131 Signed-off-by: Ed Santiago <santiago@redhat.com>
* Cirrus: Fix ownership of repos. to keep git happyChris Evich2022-04-27
| | | | | | | | | | | | | | | | | | Newer versions of git are much more pedantic about who owns the repository files. When setting up to run rootless, prior to this commit, the repo. ownership was changed from root. This causes all subsequent git-operations as root to fail: ``` fatal: unsafe repository ('<$GOSRC>' is owned by someone else) ``` Fix this by re-ordering operations, such that the change in ownership is done immediately before executing as a user. Also disable the git-ownership check on the source repository assuming the CI environment is disposable. Signed-off-by: Chris Evich <cevich@redhat.com>
* Cirrus: Test w/ netavark/aardvark-dns in F36+Chris Evich2022-04-27
| | | | | | | | | | | | | | | | | | | | Now that netavark and aardvark are packaged and default in F36, support CNI-based testing in F35 and Ubuntu. * Remove the temporary/special `$TEST_ENVIRON=host-netavark` construct. * Remove dedicated/special integration and system testing tasks. * Update test-config setup to properly handle CNI vs netavark/aardvark environments. * Update package-version logging to operate based on installed packages (along with some other minor script cleanups). * Update global environment setup to force `$NETWORK_BACKEND=netavark` in F36 and later. Except when `upgrade_test` task runs. * Discontinue installing netavark and aardvark-dns binaries from upstream build artifacts. * Drop CGV1-vs-2 policy check. Ubuntu VMs now exclusively test CGv1, Fedora VMs test CGv2, with F35 testing CNI and F36 testing Netavark. Signed-off-by: Chris Evich <cevich@redhat.com>
* Cirrus: Fix skipping all/most testsChris Evich2022-04-26
| | | | | | | | | | The originally intent for skipping tests based on change-content was to optimize the PR workflow. However, a mistake in a conditional is causing almost all tasks running for Cron and branches to be skipped. Fix this by checking for an empty '$CIRRUS_PR' variable. This value is always empty when operating outside of PRs. Signed-off-by: Chris Evich <cevich@redhat.com>
* Revert "Cirrus: Fix cirrus cache race on bin/podman"Chris Evich2022-04-25
| | | | | | This reverts commit 2f53259a8d5cd8022e797ea22a354a63bef1803a. Signed-off-by: Chris Evich <cevich@redhat.com>
* Cirrus: Fix cirrus cache race on bin/podmanChris Evich2022-04-25
| | | | | | | | | | | A suspected race on uploading gopath cache is causing the docker-py (and possibly other) tasks to fail unpredictably with an error from `make` regarding missing `bin/podman`. Since this failure is affecting all development activity, apply a quick/dirty fix to the failing task, by simply rebuilding the binary. A more comprehensive/long-term fix will be worked in a future PR. Signed-off-by: Chris Evich <cevich@redhat.com>
* Increase verbosity and sequencing of APIv2 testingChris Evich2022-04-22
| | | | | | | | | | | The default verbosity level does not show the classes or function names. This makes it difficult to debug problems like hangs. Also, separate the bats and python-based tests into two sections. This allows for easier debugging, since isolation can be done in `runner.sh` rather than mucking with the `Makefile`. Lastly, update the logformatter script to `autoflush stdout` (thanks @edsantiago). Signed-off-by: Chris Evich <cevich@redhat.com>
* Optimization: skip tests in some circumstancesEd Santiago2022-04-21
| | | | | | | | | | | | | | | A common pattern is to submit PRs that update only tests or docs. When the only changes are to test/e2e, there is no point in running test/system or test/upgrade or test/buildah-bud. Likewise, reciprocally, and similarly for a bunch of other tests (alt, cross, apiv2, ...) And when the only changes are under docs/ , there is no point in running any of the above. Exception: if $CIRRUS_<mumble> are undefined (e.g., cron), never skip Signed-off-by: Ed Santiago <santiago@redhat.com>
* Binary growth check, part 2 of 2Ed Santiago2022-03-22
| | | | | | | | | | | | | | | | Add a CI check to prevent unwanted bloat in binary images, by building a baseline (pre-PR) binary then comparing file sizes post-PR. Part 1 (#13518) added a new script that runs multiple 'make's, comparing image sizes against an original, and failing loudly if growth is too big. An override mechanism is defined. This is part 2 of 2: adding the CI rule. We couldn't do that in part 1, because the rule would call a script that didn't exist in the pre-PR commit. Signed-off-by: Ed Santiago <santiago@redhat.com>
* Add tests with Docker Compose v2Matthew Heon2022-03-17
| | | | | | | | | | | Add a pair of new Cirrus test suites using Compose v2 instead of Compose v1 (as is currently packaged in Fedora). They work identically, and run the same tests, as the Compose v1 tests, but with the new v2 binary instead. [NO NEW TESTS NEEDED] This adds an entire Cirrus suite... Signed-off-by: Matthew Heon <mheon@redhat.com>
* Move all python tests to pytestJhon Honce2022-03-04
| | | | | | | * Add configuration to add report header for python client used in tests * Move report headers into the individual test runners vs runner.sh Signed-off-by: Jhon Honce <jhonce@redhat.com>
* Clarify v2 API testing for podman vs docker clientsChris Evich2022-02-28
| | | | | | Fixes: #13273 Signed-off-by: Chris Evich <cevich@redhat.com>
* Merge pull request #12814 from cevich/netavarkOpenShift Merge Robot2022-02-01
|\ | | | | Cirrus: Add e2e task w/ upstream netavark
| * Cirrus: Add e2e task w/ upstream netavarkChris Evich2022-01-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This PR adds the CI mechanisms to obtain the latest upstream netavark binary, and set a magic env-var to indicate e2e tests should execute podman with `--network-driver=netavark`. A future commit implement this functionality within the e2e tests. Due to the way the new environment is enabled, the standard task name is too long for github to display without adding ellipsis. Force the custom task name `Netavark Integration` to workaround this. At some future point, when netavark is more mainstream/widely supported, this custom task and upstream binary install can simply be removed - i.e. netavark will simply be used by default in the normal e2e tasks. Signed-off-by: Chris Evich <cevich@redhat.com>
* | Makefile: install targets independent of buildLokesh Mandvekar2022-01-25
|/ | | | | | | | | | | | | | Building from source would involve separate `make` and `make install` steps. This removes a lot of unnecessary `-nobuild` targets which were otherwise needed for packaging. This commit also removes spec files for unused copr jobs. [NO NEW TESTS NEEDED] Signed-off-by: Lokesh Mandvekar <lsm5@fedoraproject.org>
* Cirrus: Use cached swagger binaryChris Evich2021-12-09
| | | | | | | | | | | | An error was observed in another PR while downloading the swagger binary. The error was relating to the upstream egress quota. Obviously our downloading it every time for each CI run isn't helping. Fix this by moving the download into the image-build process, and simply re-use the already present binary here. Ref: https://github.com/containers/automation_images/pull/103 Signed-off-by: Chris Evich <cevich@redhat.com>
* Cirrus: Remove remnants of nix-based static buildChris Evich2021-12-06
| | | | | | Simply a readme update and dead-code cleanup. Signed-off-by: Chris Evich <cevich@redhat.com>
* Bindings test: emit GIT_COMMIT, for links in logsEd Santiago2021-11-24
| | | | | | | | Add a magic 'echo' to runner.sh, displaying $GIT_COMMIT in a special syntax. The logformatter script, seeing this, will hyperlink error messages to the failing source file. Signed-off-by: Ed Santiago <santiago@redhat.com>
* Cirrus: Timeout bindings test after 30mChris Evich2021-11-18
| | | | | | | | | | | | | | During initial testing of Fedora 35beta VM images in CI, the bindings task was timing out. In order to allow time for collection of system details (logs), execution needs to timeout earlier than the task. Under normal conditions, the bindings test finishes in about 10-minutes. Use the ginkgo timeout option to limit execution, so it times out after 30 minutes. Also add the `-progress` option so the output more closely resembles how ginkgo runs the integration tests. Signed-off-by: Chris Evich <cevich@redhat.com>
* cirrus: containers: mount directory in /var/tmp to /tmpValentin Rothberg2021-10-26
| | | | | | | | Mount a directory from /var/tmp to /tmp to make sure that /tmp is not on an overlay mount. This should make overlay mounts possible in the containerized tests which we're currently skipping. Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Cirrus: Add gitlab podman runner testChris Evich2021-09-27
| | | | | | | | | | Add execution of the downstream gitlab-runner tests using rootless podman through the magic of socket-level docker compatibility. Include a comment suggesting how to temporarily disable the test in case it fails beyond podman code scope. Signed-off-by: Chris Evich <cevich@redhat.com>
* Cross-build release-archives w/ arch in filenameChris Evich2021-09-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes #11417 Cross-building the podman-remote documentation requires a functional native architecture executable. However `make` only deals with files/timestamps, it doesn't understand if an existing binary will function on the system or not. This makes building cross-platform releases incredibly accident-prone and fragile. A practical way to deal with this, is via multiple conditional (nested) `make` calls along with careful manipulation of `$GOOS` and `$GOARCH`. Also, when cross-building releases be kind to humans and cleanup any non-native binaries left behind. Update the `Alt Arch. Cross` Cirrus-CI task to build release archives for all Linux architectures supported by golang and podman. Update the `OSX Cross` task to additionally build for the M1 (arm64) architecture. Finally, update the release process documentation to reflect the new locations (Cirrus-CI task names) for the release archives. Include a note about additional manual work being required to produce the signed `.dmg` file for MacOS. Signed-off-by: Chris Evich <cevich@redhat.com>
* Enable docker-py compat. testing w/ ignored resultChris Evich2021-08-09
| | | | | | | | | | Significant bitrot results in almost immediate test failure. This commit adds only the very basic, bare-minimum needed to get them started. ***TESTING RESULTS ARE IGNORED*** Signed-off-by: Chris Evich <cevich@redhat.com>
* Make rootless-cni setup more robustPaul Holzinger2021-07-06
| | | | | | | | | | | | | | | | | | | The rootless cni namespace needs a valid /etc/resolv.conf file. On some distros is a symlink to somewhere under /run. Because the kernel will follow the symlink before mounting, it is not possible to mount a file at exactly /etc/resolv.conf. We have to ensure that the link target will be available in the rootless cni mount ns. Fixes #10855 Also fixed a bug in the /var/lib/cni directory lookup logic. It used `filepath.Base` instead of `filepath.Dir` and thus looping infinitely. Fixes #10857 [NO TESTS NEEDED] Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* update shell completion scriptsPaul Holzinger2021-07-02
| | | | | | | | | | | | | The new cobra v1.2.0 release brings a number of bug fixes for shell completion scripts. Regenerate the scripts with `make completions` to sync them with the upstream version, currently we have some custom ones to avoid some upstream bugs. Because the new cobra version has all fixes we should use the upstream scripts. Add a check to CI to ensure we always use the up to date scripts. [NO TESTS NEEDED] Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* Cirrus: Fixes due to master->main renameChris Evich2021-06-30
| | | | Signed-off-by: Chris Evich <cevich@redhat.com>
* Fixes from make codespellDaniel J Walsh2021-04-21
| | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Overhaul Makefile binary and release worflowsChris Evich2021-04-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Incorporate changes from abandoned #9918: Use dedicated `bin` sub-directories for `windows` and `darwin` when building `podman-remote`. The linux flavor remains under `bin` as before. * Fix MacOS Documentation-generation for release-packaging. The `install-podman-remote-%-docs` target requires local execution of `podman-remote`, but it was assuming GOOS=linux. Fix this by dynamically discovering the local OS/architecture type while still permitting cross-building of MacOS binaries under Linux. * Unify temporary directory/file behavior to use a common template. In case of left-over temporary items left in the repository, update the `clean` target accordingly to remove them. * Fix broken podman-remote-static and MacOS release archive targets mismatching the `podman-remote-%` target. Disambiguate this target for all platforms by spelling each out in full, instead of using a wild-card recipe. * Fix Windows-installer target to properly recognize existing output files and not constantly rebuild every time. * Include the podman version number in the Windows-installer target in case a user downloads multiple releases. * Include a subdirectory containing the podman version number for both `tar.gz` and `zip` targets. This prevents users clobbering existing directories when un-archiving from releases. Signed-off-by: Chris Evich <cevich@redhat.com>
* Cirrus: Make use of shared get_ci_vm containerChris Evich2021-04-05
| | | | | | | | | | | Depends on: https://github.com/containers/automation_images/pull/57 https://github.com/containers/automation/pull/64 https://github.com/containers/automation/pull/66 https://github.com/containers/automation/pull/67 https://github.com/containers/automation/pull/68 Signed-off-by: Chris Evich <cevich@redhat.com>
* Add rootless docker-compose test to the CIPaul Holzinger2021-04-01
| | | | Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
* WIP: run buildah bud tests using podmanEd Santiago2021-03-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Set of scripts to run buildah's bud.bats test using podman build in podman CI. podman build is not 100% compatible with buildah bud. In particular: * podman defaults to --layers=true; buildah to false * podman defaults to --force-rm=true; buildah to false * podman error exit status is 125; buildah is 2 * differences in error messages, command-line arguments Some of the above can be dealt with programmatically, by tweaking the buildah helpers.bash (BATS helpers). Some need to be tweaked by patching bud.bats itself. This PR includes a patch that will, I fear, need to be periodically maintained over time. There will likely be failures when vendoring in a new buildah, possibly because new tests were added for new features that don't exist in podman, possibly (I hope unlikely) if existing tests are changed in ways that make the patch file fail to apply. I've tried to write good instructions and to write the run script in such a way that it will offer helpful hints on failure. My instructions and code will be imperfect; I hope they will be good enough to merit continued use of this test (possibly with improvements to the instructions as we learn more about real-world failures). Signed-off-by: Ed Santiago <santiago@redhat.com>
* podman upgrade testsEd Santiago2021-02-23
| | | | | | | | Initial validation of using podman-in-podman to create an old-podman root, then use new-podman to play with the containers created therein. Signed-off-by: Ed Santiago <santiago@redhat.com>
* Merge pull request #9063 from cevich/master_fix_validateOpenShift Merge Robot2021-01-30
|\ | | | | Cirrus: Fix running Validate task on branches
| * Cirrus: Fix running Validate task on branchesChris Evich2021-01-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Followup to dbb9943 Despite skipping the `Smoke` check, it was observed on a *new* branch, the `validate` task (specifically `git-validation`) will fail. This is because: * `$CIRRUS_LAST_GREEN_CHANGE` will be empty on a new branch. * `$CIRRUS_BASE_SHA` is always empty for runs triggered by branch-push * `$EPOCH_TEST_COMMIT` will be set to `YOU_FOUND_A_BUG`. Fix this by eliminating the `Smoke` task entirely, simplifying all the `make validate` operations into the `validate` cirrus task. Ensure this task does not run when a new branch or tag is pushed. Also, eliminate the `$CIRRUS_BUILD_ID` value as it's confusing and not actually used anywhere. It was formerly used for building VM images, but this has moved to another repo entirely. Signed-off-by: Chris Evich <cevich@redhat.com>
* | Merge pull request #9082 from saschagrunert/static-buildOpenShift Merge Robot2021-01-27
|\ \ | |/ |/| Fix static build cache by using cachix
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-10-16 13:27:31 +0000