aboutsummaryrefslogtreecommitdiff
path: root/test/e2e/run_volume_test.go
Commit message (Collapse)AuthorAge
* volume: add support for non-volatile upperdir,workdir for overlay volumesAditya Rajan2022-01-28
| | | | | | | | | | | | | | | | | | | | Often users want their overlayed volumes to be `non-volatile` in nature that means that same `upper` dir can be re-used by one or more containers but overall of nature of volumes still have to be `overlay` so work done is still on a overlay not on the actual volume. Following PR adds support for more advanced options i.e custom `workdir` and `upperdir` for overlayed volumes. So that users can re-use `workdir` and `upperdir` across new containers as well. Usage ```console $ podman run -it -v myvol:/data:O,upperdir=/path/persistant/upper,workdir=/path/persistant/work alpine sh ``` Signed-off-by: Aditya R <arajan@redhat.com>
* bump go module to version 4Valentin Rothberg2022-01-18
| | | | | | | | | | | | | Automated for .go files via gomove [1]: `gomove github.com/containers/podman/v3 github.com/containers/podman/v4` Remaining files via vgrep [2]: `vgrep github.com/containers/podman/v3` [1] https://github.com/KSubedi/gomove [2] https://github.com/vrothberg/vgrep Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* volume: apply exact permission of target directory without adding extra 0111Aditya Rajan2021-12-07
| | | | | | | | While trying to match permissions of target directory podman adds extra `0111` which should not be needed if target path does not have execute permission. Signed-off-by: Aditya Rajan <arajan@redhat.com>
* Use HaveLen(x) instead of Expect(len(y)).To(Equal(x))Ed Santiago2021-12-02
| | | | | | sed -i -e 's/Expect(len(\(.*\)))\.To(Equal(\(.*\)))/Expect(\1).To(HaveLen(\2))/' test/e2e/*.go Signed-off-by: Ed Santiago <santiago@redhat.com>
* e2e: yet more cleanup of BeTrue/BeFalseEd Santiago2021-11-30
| | | | | | Thanks to Paul for teaching me about HaveKey() Signed-off-by: Ed Santiago <santiago@redhat.com>
* Convert strings.Contains() to Expect(ContainSubstring)Ed Santiago2021-11-30
| | | | | | | ...done manually, not via sed, because some of the inner expressions include nested commas. Signed-off-by: Ed Santiago <santiago@redhat.com>
* e2e tests: enable golintEd Santiago2021-11-29
| | | | | | ...and fix problems found therewith. Signed-off-by: Ed Santiago <santiago@redhat.com>
* e2e test cleanup, continuedEd Santiago2021-11-23
| | | | | | | | Continue eliminating GrepString() and BeTrue(), in tiny incremental steps. Here I take the liberty of refactoring some hard-to-read code by adding a helper. Signed-off-by: Ed Santiago <santiago@redhat.com>
* e2e tests: clean up antihelpful BeTrue()sEd Santiago2021-11-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | Many ginkgo tests have been written to use this evil form: GrepString("foo") Expect(that to BeTrue()) ...which yields horrible useless messages on failure: false is not true Identify those (automatically, via script) and convert to: Expect(output to ContainSubstring("foo")) ...which yields: "this output" does not contain substring "foo" There are still many BeTrue()s left. This is just a start. This is commit 1 of 2. It includes the script I used, and all changes to *.go are those computed by the script. Commit 2 will apply some manual fixes. Signed-off-by: Ed Santiago <santiago@redhat.com>
* Semiperiodic cleanup of obsolete Skip()sEd Santiago2021-11-19
| | | | | | | | | | | | | | Found by my find-obsolete-skips script. Let's see which, if any, of these skipped tests can be reenabled. Some Skips are "this will never work", not "this is expected to work one day". Update the message on those to reflect that. Some were real bugs in the test framework. Fix those. And, joy of joys, some work today. Remove those skips. Signed-off-by: Ed Santiago <santiago@redhat.com>
* Fix codespell errorsDaniel J Walsh2021-10-14
| | | | | | | | Along with a couple of nits found by Ed. [NO NEW TESTS NEEDED] Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Merge pull request #11647 from EduardoVega/11491-U-suffix-mount-optionOpenShift Merge Robot2021-09-23
|\ | | | | Add support for :U flag with --mount option
| * Add support for :U flag with --mount optionEduardo Vega2021-09-22
| | | | | | | | | | | | | | | | The :U flag can be used to change the ownership of source volumes based on the UID, GID of the container. This is only supported by the --volume option, this will allow to use --mount option as well. Signed-off-by: Eduardo Vega <edvegavalerio@gmail.com>
* | volume: Add support for overlay on named volumesAditya Rajan2021-09-21
|/ | | | | | | Following PR allows containers to create and mount overlays on top of named volumes instead of mounting actual volumes via already documented `:O`. Signed-off-by: Aditya Rajan <arajan@redhat.com>
* container: resolve workdir after all the mounts happen.flouthoc2021-08-30
| | | | | | | | There are use-cases where users would want to use overlay-mounts as workdir. For such cases workdir should be resolved after all the mounts are completed during the container init process. Signed-off-by: Aditya Rajan <arajan@redhat.com>
* e2e tests: use Should(Exit()) and ExitWithError()Ed Santiago2021-07-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | e2e test failures are rife with messages like: Expected 1 to equal 0 These make me cry. They're anti-helpful, requiring the reader to dive into the source code to figure out what those numbers mean. Solution: Go tests have a '.Should(Exit(NNN))' mechanism. I don't know if it spits out a better diagnostic (I have no way to run e2e tests on my laptop), but I have to fantasize that it will, and given the state of our flakes I assume that at least one test will fail and give me the opportunity to see what the error message looks like. THIS IS NOT REVIEWABLE CODE. There is no way for a human to review it. Don't bother. Maybe look at a few random ones for sanity. If you want to really review, here is a reproducer of what I did: cd test/e2e ! positive assertions. The second is the same as the first, ! with the addition of (unnecessary) parentheses because ! some invocations were written that way. The third is BeZero(). perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Equal\((\d+)\)\)/Expect($1).Should(Exit($2))/' *_test.go perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(\(Equal\((\d+)\)\)\)/Expect($1).Should(Exit($2))/' *_test.go perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(BeZero\(\)\)/Expect($1).Should(Exit(0))/' *_test.go ! Same as above, but handles three non-numeric exit codes ! in run_exit_test.go perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Equal\((\S+)\)\)/Expect($1).Should(Exit($2))/' *_test.go ! negative assertions. Difference is the spelling of 'To(Not)', ! 'ToNot', and 'NotTo'. I assume those are all the same. perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.To\(Not\(Equal\((0)\)\)\)/Expect($1).To(ExitWithError())/' *_test.go perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.ToNot\(Equal\((0)\)\)/Expect($1).To(ExitWithError())/' *_test.go perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.NotTo\(Equal\((0)\)\)/Expect($1).To(ExitWithError())/' *_test.go ! negative, old use of BeZero() perl -pi -e 's/Expect\((\S+)\.ExitCode\(\)\)\.ToNot\(BeZero\(\)\)/Expect($1).Should(ExitWithError())/' *_test.go Run those on a clean copy of main branch (at the same branch point as my PR, of course), then diff against a checked-out copy of my PR. There should be no differences. Then all you have to review is that my replacements above are sane. UPDATE: nope, that's not enough, you also need to add gomega/gexec to the files that don't have it: perl -pi -e '$_ .= "$1/gexec\"\n" if m!^(.*/onsi/gomega)"!' $(grep -L gomega/gexec $(git log -1 --stat | awk '$1 ~ /test\/e2e\// { print $1}')) UPDATE 2: hand-edit run_volume_test.go UPDATE 3: sigh, add WaitWithDefaultTimeout() to a couple of places UPDATE 4: skip a test due to bug #10935 (race condition) Signed-off-by: Ed Santiago <santiago@redhat.com>
* Fix volumes with uid and gid optionsPaul Holzinger2021-06-11
| | | | | | | | | | | | | | | | Podman uses the volume option map to check if it has to mount the volume or not when the container is started. Commit 28138dafcc39 added to uid and gid options to this map, however when only uid/gid is set we cannot mount this volume because there is no filesystem or device specified. Make sure we do not try to mount the volume when only the uid/gid option is set since this is a simple chown operation. Also when a uid/gid is explicity set, do not chown the volume based on the container user when the volume is used for the first time. Fixes #10620 Signed-off-by: Paul Holzinger <pholzing@redhat.com>
* Fix podman build --pull-neverDaniel J Walsh2021-03-27
| | | | | | | | | | | Currently pull policy is set incorrectly when users set --pull-never. Also pull-policy is not being translated correctly when using podman-remote. Fixes: #9573 Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Ensure manually-created volumes have correct ownershipMatthew Heon2021-03-24
| | | | | | | | | | | | | | | | | | | | | | | | | As part of a fix for an earlier bug (#5698) we added the ability for Podman to chown volumes to correctly match the user running in the container, even in adverse circumstances (where we don't know the right UID/GID until very late in the process). However, we only did this for volumes created automatically by a `podman run` or `podman create`. Volumes made by `podman volume create` do not get this chown, so their permissions may not be correct. I've looked, and I don't think there's a good reason not to do this chwon for all volumes the first time the container is started. I would prefer to do this as part of volume copy-up, but I don't think that's really possible (copy-up happens earlier in the process and we don't have a spec). There is a small chance, as things stand, that a copy-up happens for one container and then a chown for a second, unrelated container, but the odds of this are astronomically small (we'd need a very close race between two starting containers). Fixes #9608 Signed-off-by: Matthew Heon <mheon@redhat.com>
* Add U volume flag to chown source volumesEduardo Vega2021-02-22
| | | | Signed-off-by: Eduardo Vega <edvegavalerio@gmail.com>
* bump go module to v3Valentin Rothberg2021-02-22
| | | | | | | | | We missed bumping the go module, so let's do it now :) * Automated go code with github.com/sirkon/go-imports-rename * Manually via `vgrep podman/v2` the rest Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Change source path resolution for volume copy-upMatthew Heon2021-02-17
| | | | | | | | | | | | | | | Instead of using the container's mountpoint as the base of the chroot and indexing from there by the volume directory, instead use the full path of what we want to copy as the base of the chroot and copy everything in it. This resolves the bug, ends up being a bit simpler code-wise (no string concatenation, as we already have the full path calculated for other checks), and seems more understandable than trying to resolve things on the destination side of the copy-up. Fixes #9354 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Fix an issue where copyup could fail with ENOENTMatthew Heon2021-02-16
| | | | | | | | | | | | | | | | | | This one is rather bizarre because it triggers only on some systems. I've included a CI test, for example, but I'm 99% sure we use images in CI that have volumes over empty directories, and the earlier patch to change copy-up implementation passed CI without complaint. I can reproduce this on a stock F33 VM, but that's the only place I have been able to see it. Regardless, the issue: under certain as-yet-unidentified environmental conditions, the copier.Get method will return an ENOENT attempting to stream a directory that is empty. Work around this by avoiding the copy altogether in this case. Signed-off-by: Matthew Heon <mheon@redhat.com>
* Rewrite copy-up to use buildah CopierMatthew Heon2021-02-10
| | | | | | | | | | | | | | | | The old copy-up implementation was very unhappy with symlinks, which could cause containers to fail to start for unclear reasons when a directory we wanted to copy-up contained one. Rewrite to use the Buildah Copier, which is more recent and should be both safer and less likely to blow up over links. At the same time, fix a deadlock in copy-up for volumes requiring mounting - the Mountpoint() function tried to take the already-acquired volume lock. Fixes #6003 Signed-off-by: Matthew Heon <mheon@redhat.com>
* Docker ignores mount flags that begin with constencyDaniel J Walsh2021-01-30
| | | | | | | | | | | | | | Fixes https://bugzilla.redhat.com/show_bug.cgi?id=1915332 ``` According to the Docker docs, the consistency option should be ignored on Linux. the possible values are 'cached', 'delegated', and 'consistent', but they should be ignored equally. This is a widely used option in scripts run by developer machines, as this makes file I/O less horribly slow on MacOS. ``` Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Ensure we do not double-lock the same volume in createMatthew Heon2020-11-11
| | | | | | | | | | | | | When making containers, we want to lock all named volumes we are adding the container to, to ensure they aren't removed from under us while we are working. Unfortunately, this code did not account for a container having the same volume mounted in multiple places so it could deadlock. Add a map to ensure that we don't lock the same name more than once to resolve this. Fixes #8221 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* podman create doesn't support creating detached containersDaniel J Walsh2020-10-21
| | | | | | | | | | | | Detached containers and detach keys are only created with the podman run, i exec, and start commands. We do not store the detach key sequence or the detach flags in the database, nor does Docker. The current code was ignoreing these fields but documenting that they can be used. Fix podman create man page and --help output to no longer indicate that --detach and --detach-keys works. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Make all Skips specify a reasonDaniel J Walsh2020-09-29
| | | | | | Always use CGROUPV2 rather then reading from system all the time. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Remove SkipIfRootless if possible, document other callsDaniel J Walsh2020-09-27
| | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* e2e tests: SkipIfRemote(): add a reasonEd Santiago2020-09-23
| | | | | | | | | | | | | | | | | Now that Dan has added helpful comments to each SkipIfRemote, let's take the next step and include those messages in the Skip() output so someone viewing test results can easily see if a remote test is skipped for a real reason or for a FIXME. This commit is the result of a simple: perl -pi -e 's;(SkipIfRemote)\(\)(\s+//\s+(.*))?;$1("$3");' *.go in the test/e2e directory, with a few minor (manual) changes in wording. Signed-off-by: Ed Santiago <santiago@redhat.com>
* Examine all SkipIfRemote functionsDaniel J Walsh2020-09-22
| | | | | | | | Remove ones that are not needed. Document those that should be there. Document those that should be fixed. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Remove some unnecessary []byte to string conversionsSascha Grunert2020-08-03
| | | | | | | Some calls to `Sprintf("%s")` can be avoided by using direct string type assertions. Signed-off-by: Sascha Grunert <sgrunert@suse.com>
* Switch all references to github.com/containers/libpod -> podmanDaniel J Walsh2020-07-28
| | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Turn on a bunch more remote testsDaniel J Walsh2020-07-22
| | | | | | We need to be more specific about the remote tests we turn off. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Add support for overlay volume mounts in podman.Qi Wang2020-07-20
| | | | | | | | Add support -v for overlay volume mounts in podman. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com> Signed-off-by: Qi Wang <qiwan@redhat.com>
* Change buildtag for remoteclient to remote for testingDaniel J Walsh2020-07-06
| | | | Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* move go module to v2Valentin Rothberg2020-07-06
| | | | | | | | | | | | | | | With the advent of Podman 2.0.0 we crossed the magical barrier of go modules. While we were able to continue importing all packages inside of the project, the project could not be vendored anymore from the outside. Move the go module to new major version and change all imports to `github.com/containers/libpod/v2`. The renaming of the imports was done via `gomove` [1]. [1] https://github.com/KSubedi/gomove Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
* Add support for `readonly` option to --mountMatthew Heon2020-05-26
| | | | | | | | | This is just an alias to the `ro` option, but it's already in the manpages (and Docker) so we might as well add support for it. Fixes #6379 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Turn off 'noexec' option by default for named volumesMatthew Heon2020-05-20
| | | | | | | | | We previously enforced this for security reasons, but as Dan has explained on several occasions, it's not very valuable there (it's trivially easy to bypass) and it does seriously annoy folks trying to use named volumes. Flip the default from 'on' to 'off'. Signed-off-by: Matthew Heon <mheon@redhat.com>
* enable volume integration testsBrent Baude2020-04-27
| | | | | | | | enabled integration tests for volumes. there are two exceptions that still need work because of something not yet implemented. also, add code to deal with the fact that containers conf appears to set a local volume driver where it used to be simply blank. Signed-off-by: Brent Baude <bbaude@redhat.com>
* Add support for volumes-from, image volumes, initMatthew Heon2020-04-27
| | | | | | | | | | | This should complete Podmanv2's support for volume-related flags. Most code was sourced from the old pkg/spec implementation with modifications to account for the split between frontend flags (volume, mount, tmpfs) and the backend flags implemented here. Also enables tests for podman run with volumes Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Force integration tests to passBrent Baude2020-04-21
| | | | | | Failing tests are now skipped and we should work from this. Signed-off-by: Brent Baude <bbaude@redhat.com>
* test/e2e/run_volume_test: use unique mount pointKir Kolyshkin2020-04-02
| | | | | | | | | | | | For volume and bind mount tests, use the in-container mount point path that has no common ancestor with any host path (except for root). This might help to uncover bugs like [1]. Even if not, it seems lile a good cleanup regardless. [1] https://github.com/containers/libpod/pull/5676 Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
* test/e2e/run_volume_test.go: mv dockerfile declKir Kolyshkin2020-04-02
| | | | | | | | Move declaration of a dockerfile closer to its use. Since it is used only once, there's no sense in having it declared globally. Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
* test/e2e/run_volume_test: only create dir onceKir Kolyshkin2020-04-02
| | | | | | | | | | | | | Remove repeated mountPath directory creation. * For the first two hunks it is the same dir ("secrets") that was already created before. * For the last hunk ("scratchpad") it is not used at all. Add an empty line after Mkdir for cases where dir is used more than once. Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
* Switch to using --time as opposed to --timeout to better match Docker.Daniel J Walsh2020-03-31
| | | | | | | We need to consistently use --time rather then --timeout throughout the code. Fix locations where timeout defaults are not set correctly as well. Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
* Use cleaned destination path for indexing image volumesMatthew Heon2020-02-17
| | | | | | | | | | | | | | We use filepath.Clean() to remove trailing slashes to ensure that when we supercede image mounts with mounts from --volume and --mount, paths are consistent when we compare. Unfortunately, while we used the cleaned path for the destination in the mount, it was accidentally not used to index the maps that we use to identify what to supercede, so our comparisons might be thrown off by trailing slashes and similar. Fixes #5219 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* Do not copy up when volume is not emptyMatthew Heon2020-02-12
| | | | | | | | | | | | | | | | | When Docker performs a copy up, it first verifies that the volume being copied into is empty; thus, for volumes that have been modified elsewhere (e.g. manually copying into then), the copy up will not be performed at all. Duplicate this behavior in Podman by checking if the volume is empty before copying. Furthermore, move setting copyup to false further up. This will prevent a potential race where copy up could happen more than once if Podman was killed after some files had been copied but before the DB was updated. This resolves CVE-2020-1726. Signed-off-by: Matthew Heon <matthew.heon@pm.me>
* mount: add new options nocopyup|copyup for tmpfsGiuseppe Scrivano2019-11-07
| | | | | | add a way to disable tmpcopyup for tmpfs. Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
* Wait for `mount` command to finish when mounting volumeMatthew Heon2019-10-30
| | | | | | | | | | | | | | | | command.Start() just starts the command. That catches some errors, but the nasty ones - bad options and similar - happen when the command runs. Use CombinedOutput() instead - it waits for the command to exit, and thus catches non-0 exit of the `mount` command (invalid options, for example). STDERR from the `mount` command is directly used, which isn't necessarily the best, but we can't really get much more info on what went wrong. Fixes #4303 Signed-off-by: Matthew Heon <matthew.heon@pm.me>
generated by cgit v1.2.3-54-g00ecf (git 2.39.0) at 2024-12-27 07:16:26 +0000